Search the Community

Showing results for tags 'firmware'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 11 results

  1. Hi all,  I am trying to update the firmware of a NS12-TS01B-V2. I have downloaded the RecoverUpdate_8_95.exe (and someothers) from the myomron website. I have followed the instrucctions PDF, but when I switch on the HMI with the Compact Flash inserted, nothing happens: the screen is dark and the led is lit orange (not blinking).  The compact flash is 1GB (not omron) and formated using a CJ2. I have been using this card in OMRON PLCs and HMIs for years without problems.  I read in other topic than I guy had similar problems and he solved it using other computer and other unzipper program. I have tried it, but it did not work.  After that, I tried to update it using the DIP switches, but I got more problems, because I got a Warning first, and later an Error, because I forced the installation of the Firmware of the NS8 (BANK1) instead of the NS12. However, the other BANK folder contains the FW for the NS5... Anyway, I could fix this error because previously I did a backup of the already installed system (V7.0). I would like to ask you to send me a BackUp of another NS12, using the "Manual Transfer", that should works. I need the 8.20 version or higher.  Thanks a lot.  My email is hector.moreno.lax@gmail.com
  2. Dear All, 2094-BM01-SA0192 was installed on a machine, now we are installing 2094-BM01-SB1111 Problem is that when we Power ON, it start showing 0,1,2 and remains on 2 while in old SA0192, it goes to 1,2,3 and 4 then comes to normal display. can anyone suggest the solution? waiting
  3. Is it possible to upgrade the firmware in an NJ controller?
  4. Hello everyone, we have two damaged analog cards for CompactLogix PLC ( 1769-OF8C  & 1769-IF8) that we are going to replace. my experience is with Siemens and Schneider PLC's  but for Allen Bradley, not so much so my question is : are there any requirements or specification other than the part-number that could prevent the cards from going in service directly ? as for the firmware, series and so on ?  and do i need to do any extra work after replacing the card ? thank you Best Regards
  5. Hello everyone! This is the first time I use Micro850 controller (2080-LC50-48QWB) and after I made a really simple programme (just for testing) I wanted to download it to my controller (which I was able to see and connect to via Ethernet and USB normally) and I got a message saying that firmware version didn't match (programme - v9, and PLC - v4). So I found some datasheet where was explained how to upgrade device firmware with ControlFLASH. I started the mentioned software, choose the right controller, and I choose the version 9 and the process started, but near the end I got the ERROR message, and the update wasn't finished successfully. So my controller went to fault (FAULT red light flashes) and now I can not see it in RSLinx nor via Ethernet nor USB. Does anyone have any idea what could I do to try to establish connection with my controller? I have tried to change from prog mode to run, and back to prog, but the fault remains. I really hope that I didn't make some serious mistake, because we need this PLC very soon for work. Thanks  in advance!
  6. F940GOT firmware

    Hi everybody, My client got a problem with F940GOT HMI, probably due to its lithium battery has dicharged. We have managed to find it and to replaced the battery, then have downloaded the working copy of the HMI program, which was uploaded from GOT to PC in good time, when the equipment was working fine. However after that not all is working well, something went wrong: there are unexpectable symbols on the HMI screen, undefined in the project... Perhaps, the HMI got a problem with its firmware... Therefore the questions are: 1) Where is to find the firmware? (may be somebody has it)  2) How to download the firmware into HMI? Thanks in advance for a quick answer and help, because the issue is quite urgent !
  7. S7-1200 firmware load on the CPU once we have it inside the card. What is the process and sequence of LEDs indicating which CPU is running at all times. Have a look and red amore at... http://www.tecnoplc.com/cargar-firmware-s7-1200-en-una-cpu-6es7-214-1be30-0xb0/ You can find some more inforamtion about how to update firmware at... http://www.tecnoplc.com/actualizar-firmware-s7-1200-de-una-cpu-6es7-214-xxx-0xb0/ ------------------------------------------------------------------------------ www.tecnoplc.com
  8. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  9. Hi: I know how to update the S7-1200 by this link: http://www.tecnoplc.com/actualizar-firmware-s7-1200-de-una-cpu-6es7-214-xxx-0xb0/ , but anyone knows about update the Firmware with other type of Memory Cards??? Is it available with 12MB or 4MB card??? Thank you a lot.
  10. compactlogix firmware upgrade fail

    I have new compactlogix plc L43, it was 1.4 firmware rev and when i try to upgrade the firmware the communication lost during upgrade , I make this upgrade using Serial communication (very slowwwwww) Now i cannot see the plc on RSlinix and cannot communicate with it I know that if the communication loss during firmeare upgrade, the PLC will be stop and it should return back to allen bradley any one have soloution for this problem ??????????????
  11. Question about firmwares

    Hello. I searched for an answer for this but it is still not very clear to me. I have a new Guardlogix 1756-L72S. I would like to create a project to work with it with firmware version 20.13. I have RSlogix5000 v20.01(CPR 9 SR 5) which should be compatible with it (in fact I can open projects with another guardlogix that have that firmware version) BUT when I create my new porject, the firmware version RSLogix5000 puts is v20.11 1. How could I create a project with the firmware version 20.13 for my guardlogix? (Didn't find an AOP for this) 2. If I update the guardlogix to firmware 20.13 with the CONTROLFLASH, could I still be able to go online and work with it, even though my project has a different firmware version? Thanks!