Search the Community

Showing results for tags 'ethernet modul'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 147 results

  1. So I need to find a way for a Mitsubishi PLC to communicate with a PC - ideally sending a binary number through ethernet to a PC program that reads it and tells the PC which files to open. I think I can create the PC program with C++ or Visual Basic without too much struggle. But I am unsure of how to get that binary ID from the PLC and into the PC program. I have done a little bit of research on MX Component and MX Sheet, and also MC Protocol but all seem a bit outdated and/or just over my head and I need some better explanation - I'm pretty new to PLC and programming. I feel like it shouldn't be terribly difficult to get 1 external binary number into a PC program. I'm sure someone has done essentially the same transfer and I just want some ideas. -What kind of connection support do I need to transfer data (Likely just a D-bit) from a PLC to PC? -How would that/those bit(s) be accessed in Visual Basic or C++? I'm assuming some type of library function that will call the value
  2. OMRON PLC

    Is it possible converting Omron and Keyence plc's serial communication into Ethernet using serial to RJ45 converter?I need to connect these plcs with MOXA 5600 terminal service for communicating it to the Server.Thanks in Advance....!
  3. Good day, how can I send string data by buil-in ethernet. Maybe word 'TRIGGER,?
  4. NX102 Ethernet IP

    Hi :        IF there are 10 global variables in the NX102        Count_1....................Count_10 (all of the variables are UINT)   what is the   Class ID Instance ID. and Attribute ID for reading from and writing values to the above said variables? I am unable to find the the appropriate manual below is an Application that is able to peek at Omron EIP PLC https://sourceforge.net/projects/enipexplorer/
  5. Good day, I have Mitsubishi SN 18xxxxx with new firmware 1.111 and attached FX5-ENET/IP module to communicate with SMC EX260-SEN1, have you any example how send data into SMC over Ethernet/IP? Thanx for reply
  6. Omron CJ2M-CPU13

    What are all the possible way to fetch data from nine Omron CJ2M-CPU13 for an OEE application. Is it possible to communicate by adding an EtherNet/IP module to it. I need to connect to Kepware Server.
  7. Good day, I am new in mitsubishi and have a question about how build built in ethernet communication on fx5u fw 1.050 gx3 1.047 with smc ex260 sen1, where i need send 2 bytes and receive 4 bytes can u help me? I try to send data with this format 2#0000000100000001 and send by Ethernet Active Tcp connection library where I have added the external device configuration ip and port SMC EX260 SEN1, I think I needed use a CIP protocol and port 44818 or Ethernet/ip, maybe I need add a ENET module to use this communication between my devices? Thanks a lot for answers
  8. I have a bit of an issue with communication between GOT1000 HMI (I think the exact model is GOT1675V) and Q03UDE PLC over Ethernet. The GOT is set to 192.168.1.4 and PLC is set to 192.168.1.2 but I get the error "Communication Error. Refer to System Alarm in Utility Menu". Now how do I access the utility menu? I have tried to tap and hold on the upper corners of the HMI but nothing happens. I also can not switch between screens when I press buttons even though they are directly linked via screen #. Almost like the HMI froze up. Wonder if anyone had similar issue and what the solution might be. Thanks for your help.
  9. Direct Logic 05 Ethernet

    I have a control that I want to use a Direct logic 05 plc in.  It is a really simple program but it is going into a plant that has a main control panel that runs the plant.  I dont know the brand of the plc in the main control.  They want to be able to send me a command from their plc to the direct logic to turn on my unit.  I suppose that would mean a simple set instruction to my plc.  I also have a couple alarm conditions that I want to send them.  For example if water pressure is to low I would put my unit in the alarm mode and send them a low water signal.  If the chemical is low likewise,   I dont have a clue how to do this in my program.  Can anyone give me some examples in direct logic plc program for making this happen??? Thank you Thank you Thank you. MikeC
  10. Graphic Operational Controller

    Please give me the steps how to communicate GOC with Laptop using Ethernet and serial port I have using Codesys for Programming
  11. FX5U comm with A1SJ71QE71N3-T

    Hi, does anyone has program example of ethernet communication between FX5U (GX Works 3) and A1SJ71QE71N3-T (GX IEC Developer). I need to read and write in both directions. Thanks
  12. I was wondering if I can use the ethernet and the rs232 interface at the same time with two different devices. A computer with RSLinx on the ethernet and and Arduino RS232 on the RS232 with DF1?
  13. Is it possible to setup Ethercat parameters from within the PLC program?  I am facing a situation where a machine is going to have changeable tooling fixtures and each fixture is going to have an EtherCAT device on it.  I am guessing they will need to be setup to look like the same node to the PLC, but they will have different physical IDs and different settings for some of the parameter fields.  They will be the same device so they will have the same parameter fields, just different values in those fields. I can also get these devices with EthernetIP as the fieldbus option.  In that case I would always have a network error because the PLC would always see one of the devices missing from the network.  is it possible to enable/disable Ethernet connections from within the program logic to avoid the error?
  14. I have a fx5u plc connected to 2 keyence sr 1000 qr code scanners using plc link. On random times the plc error light will light up and all ethernet connection will be disconnected and i cannot connect to the plc with gx works 3. If i put the plc in stop mode tho i can connect to the plc. I do not know what error code is causing this because each time i connect the error code is missing. The problem starts when the plc is in run mode. Can anyone help me with this as this is a persistent bug that keeps on happening in my system?
  15. Hi I am using a P342020 together with a HMID642 Magelis Panel. Using Unity Pro I have successfully downloaded a program to the CPU via USB. The HMI Panel powers up into 'Initial Start Mode' and is asking me to 'Download the system from your editor.' How is this done? How should the ethernet connections be made? between PC (with Unity Pro and Vijeo), M340 and HMI panel and where do I set all the IP addresses? I guess there is documentation somewhere but couldn't find it...! Regards   Andy
  16. Good Day, I am seeing intermittent bUs (communication bus) errors on 3 VFD's simultaneously.  These are Yaskawa P1000's with CM092 Industrial Ethernet Cards. There are Stratix 5700 switches between the drives and the Controllogix 1756-L75 CPU.  Happens every day to every week -- intermittent. Reading parameter F6-98, it indicates a 'connection time out'.  I don't understand why I would receive this fault.  IGMP snooping and querier are enabled on all switches, if that matters. I do not have unicast checked but Yaskawa said that didn't matter.  Packet time is 100 milliseconds.  I welcome any input on what might cause this.  One Yaskawa tech said I should set speed to 100 Mbps (now set at 10 Mbps). Any help appreciated.
  17. Hi All  I'm struggling to a PLC using WAGO's e!cockpit software which I am new to.  In the network tab when I click to select "ETHERNET" from the "Scan Settings" area all that comes up is a drop down with "update selection" which does nothing.  As a result I cannot scan for the PLC's on my network. Has anyone got any ideas on this issue.  I'm running on windows 10, could that be a problem?     
  18. Fuel tank level automatic report

    Hello, I have a fuel level reading system in a 2000 gallon diesel tank. the system has a slc 5 05 of rockwell. I need to connect the system to a printer located in an office 300 meters away from the tank. can someone give me lights about the type of printer I need and what communication technology to use, preferably wireless. Thanks.
  19. Hello.. I have hmi Proface GP-4301TW, USB type B cable and ethernet cable. I want to transfer the program to the hmi but I cant. When I turn on the power of hmi,  a series of test appears and finally it looks like the photo below and I cant enter the offline menu.. can anybody help me to solve the problem?
  20. I'm trying to understand the basics of using a serial to ethernet converter such as this Comtrol DM-EIP-2101, with Studio5000 code. Basically I have a weighing machine that only outputs data via RS-232 and I need to send that data to a PC that will process it through a Studio5000 program and have the data displayed on an HMI using FTview SE. Is it as simple as just connecting the serial and ethernet to the converter and it does all the work? Obviously checking ip addresses and firmware will need to be verified. The main thing I am unsure of is the process of passing the individual data packets from the machine to the Logix code on the PC,  things like what the weight of the item was, was it over weight or under, etc....  Would there be an AOI or tags built into the software for a machine like this Checkweigher? I've worked with much smaller items like Cognex Dataman cameras and I know you can just use their AOI that allows you to simply call a tag if you want to display information like if a scanned barcode was correct or whatever. If anyone has done something similar I'd appreciate any guidance. It can be difficult getting the information from the manufactures so I'm looking for answers anywhere I can. EDIT: I guess I should also clarify that only using one or the other (serial or E/IP) is not an option. It will be a serial connection from the Weighing machine to the converter and then Ethernet to the PC.
  21. Hi All, I am new with PLCs. Currently I have a project that required me to send a 12 alphanumeric (2D code scanned) from multiple CP1Hs to NJ101. Then NJ101 will directly send the data into a SQL (haven't made yet). So basically, there are a few hurdle that I face. 1) How send data from CP1H to NJ101.  - I have tried using _CPU010_SendData from CP1H but I'm not sure how to do the ladder or what to use on sysmac (NJ101) side. Btw, I really not familiar with sysmac.  This is the first project that I use sysmac.  - I have read about TCP IP, Fins/UDP and Fins/TCP but I'm not familiar with those method. 2) How to confirm that NJ101 has received the data from CP1H 3) How to arrange the data received from CP1H into SQL - This one I have a sample program that I can follow from my colleague. 4) Setting up a dummy SQL server just for the sake of testing. - I don't have any idea on this. I anyone have an application or software that can used to test the database function, please let me know.   Your helps are greatly appreciated!   Thank you! Bob
  22. All, I have been trying for days to find a way to control a yaskawa v1000 over Ethernet. I have been trying to use explicit messaging but I cannot find the instance class  etc in any of the yaskawa literature. All I can find is to use EDS files with RS5000 but I have a micrologix 1400 and I don't have that capability. If anyone has any recommendations let me know. Thank You, Liam M.     
  23. I am needing some guidance on an application I'm working on. I'm trying to obtain data from a profinet slave device to an Allen Bradley compactlogix PLC. I am using a Prosoft PLX82-EIP-PNC profinet-/ethernet-ip gateway as a median to allow me to access the profinet data. In RSlogix5000, I have created an EIP Class 1 connection for the profinet controller and AB PLC (248 words of input data, 248 words of output data). The same structure is created in the profinet controller (248 words of input data, 248 words of output data). The profinet gateway and PLC are communicating properly. From my profinet slave device, I have a specification that the data is structured within a 23 byte format. Connecting to my profinet gateway, I can see this data. I have attached an image that shows the specification of the profinet data and the data values displayed inside the profinet controller. From the PLC side, I'm needing to be able to see this data and put it in meaningful values. I am using the profinet slave device's internal temperature as an example to work towards. I'm not sure the best way to be able to handle this data and structure it to a meaningful value inside the PLC. (I am using the device's internal temperature as an example to try and get into the PLC).   Thanks,
  24. I am needing some guidance on an application I'm working on. I'm trying to obtain data from a profinet slave device to an Allen Bradley compactlogix PLC. I am using a Prosoft PLX82-EIP-PNC profinet-/ethernet-ip gateway as a median to allow me to access the profinet data. In RSlogix5000, I have created an EIP Class 1 connection for the profinet controller and AB PLC (248 words of input data, 248 words of output data). The same structure is created in the profinet controller (248 words of input data, 248 words of output data). The profinet gateway and PLC are communicating properly. From my profinet slave device, I have a specification that the data is structured within a 23 byte format. Connecting to my profinet gateway, I can see this data. I have attached an image that shows the specification of the profinet data and the data values displayed inside the profinet controller. From the PLC side, I'm needing to be able to see this data and put it in meaningful values. I am using the profinet slave device's internal temperature as an example to work towards. I'm not sure the best way to be able to handle this data and structure it to a meaningful value inside the PLC. (I am using the device's internal temperature as an example to try and get into the PLC).   Thanks,
  25. Hello I have a problem with dl-ep1 ethernet modul. I connected the module to a IL-1000 sensor amplifier. There is some problem with the communication. How should I adjust ? I made some pic about the trouble. The sensor is a IL-600 laser distance sensor. I dont know yet how can I get the actual value.  Anybody knows how to set this modul ? If I think correctly after the right setting, if I check the sensor output:0 then, I can see the actual value of the IL-600 sensor. But unfortunatelly this part also not so clear for me, because I can connect about 15 sensor this ethernet modul.  Thank you so much if anybody help.