Search the Community
Showing results for tags 'error reading data'.
Found 252 results
-
Hello, I am trying to log data using GT Designer 3 and I'm having no luck. I found some sort of online documentation and even going through the myriad of steps still find my self unable to log anything. I am using the melsoft project navigator and GX Works 2 to simulate the logging of just one 16 bit signed word with a constant value. As logging data is clearly not as simple as just specifying D100 or D200 as the devices you want to log, I am hoping someone else on here has some experience on this matter and can help me out. Thanks for any help in advance.
-
Hello, When i get error 2003 with sktTCPAccept what is causing it? Can it be caused if something was left open from previous session, is something wrong on server or client side? From F1 help i think error causes can be narrowed down to either open/close processing is in progress for SrcTcpPort although it doesnt specifically state that it causes error 2003. After closing port is there delay needed before i can use sktTCPAccept again?
-
MY OMRON CJ1M CPU12 SHOWS UNIT NUMBER DUPLICATE ERROR. ERROR CODE IS 0X80E9. THE CPU HAS TWO NUMBER OF HIGH SPEED COUNTER IN A RACK SOME AND I/O UNITS. PLEASE HELP HOW TO SET MACHINE NUMBER (ROTARY SWITCH) IN OMRON CJ1W-CT021 IF TWO UNIT CONNECTED IN ONE CPU. PLEASE SEE ATTACHED PICTURE. CJ1W-CT021.bmp
-
GT work 3 installation.... How to clear this error ' because the path name of installer folder is too long installation process is discontinued. Please move installer folder to the place which the path name became 87 or less letter and execute setup.exe onces again'
-
Dear Friends, I have made this video to show you how to take data samples from Delta DVP PLC and save this log file in the Weintek HMI internal memory. The Weintek HMI internal memory is easily accessible using ftp. All the necessary steps are mentioned in the video. The link of the video is given below,
-
Hi all, I have finished installing ethernet adapter module FX3U-ENET-ADP on the FX3U-48M PLC. From the ethernet module, i connected it to a wireless router and then i am planning of connecting to the ethernet module using GXWorks 2 on my laptop through wireless router. On the ethernet module, the error indicator LED is on (red). From the FX3U-ENET-ADP, it means that there might be setting or hardware errors. I am asking if i have missed some steps on the installation process and if any of you have experience with similar problems. Thanks in advance for the answers.
-
Dear All My system includes Module 1747-SDN which controls Micrologix via Module 1761-NET-DNI but Now Module 1761-NET-DNI is broken and I replace a new but the system issue error on both Module 1747-SDN and 1761 -NET-DNI. I don't know what I have to do when I replace Module 1761-NET-DNI? Thank you very much
-
Hi all, I am currently having a project of polling data from PLC CJ1M using Advantech ECU-1051 IoT gateway which support rs-232 serial connection (Host Link) to poll data from the PLC for data acquisition and monitoring, I would like to use peripheral port since rs-232c port is used for HMI. However, I am currently stuck at make the connection between those two devices. I did setup same transmission configuration between them (baudrate, Unit number, start/stop bits,...). Is there any configuration that I have missed to make the communication works?
-
Hi, I am trying to establish communication between master and slave through modbus rtu rs485. But I am experiencing error code 7378h. I already tried to make the values of Request Interval Timer from 100 to 200 and Broadcast Delat Value from 50 to 100. But the error still persist. Any tips how to solve this issue? There is no error on the slave evices.
-
Good day everyone, before I start asking my question, just want to let you all know that my knowledge with PLC is not that good. I'm still learning on how to do it. So currently I'm working on a project that trying to obtain data from Omron PLC. I was told that I can't touch the Omron PLC program or modify it. That Omron PLC is connected in an isolated network within a router. Other than adding Network Card on the device, can I use another PLC (any brands) to get the data from that Omron PLC through the router? The communication protocol using here is Ethernet. Can i just tapped into the network and take the data with that way? Or the other method I'm thinking is that, the Omron PLC will feed the data to a server, can I just obtain that data from server by using OPCUA? I heard there's some PLC that have the OPCUA function, I just make my PLC into the cilent and request the data of that Omron PLC from server through Ethernet. Is this possible? Please let me know whether my method works or not, thanks in advance guys!
-
I cannot use register D128 - 255 in the program with the Block function
phucPLC posted a topic in Mitsubishi
Hi every one ! I cannot use register D128 - D255 in the program when I create a program that uses the Block function in the PLC mitsubishi FX1S, it gives an error : A device of the device range set in the device/label automatic-assign setting or a device which cannot be used due to system reservation is being used.Help me,Thanks ! -
I'm editing an old program for a customer that has a zillion user-defined data types. Scrolling through the list trying to find a specific type definition is taking way too long. Is there and easy way to find a specific data type definition? It would help if I knew how to collapse the view so I don't have to scroll through each member of every type. There doesn't seem to be any right-click menu items that would collapse the view.
-
MELSEC Q12PRHCPU MEMORY COPY RESULTED TO FILE DIFF. ERROR 6000
Ravi@aoa posted a topic in Mitsubishi
Folks, we have a set of Mitsubishi Q12PRHCPU (redundant) running effortless since many years. CPU-A as standby and CPU-B as Control. Recently we noticed BATT low alarm on CPU-B. So we arranged for a spare battery Q6BAT and started the procedure as per manual(attached procedure and flow chart). We did memory copy from Control to standby (as prescribed precaution) and did the Reset of Standby PLC CPU-A. Memory copy from B to A completed successfully 100%. But the BACKUP LED did not turn Green from Red & Error LED kept flickering on standby CPU-A. CPU-B remain in Control but backup LED turned RED. From system monitoring we found that there is a Error 6000 (FILE DIFF.) observed in One of the .QPG (program 00-MDBUS.QPG). We tried to reset it but were not successful. We are surprised that why does the program differs when it was copied from CPU-B to CPU-A using the memory copy. Still we did the VERIFY and found no difference between the programs in CPU-A & CPU-B. Can anyone explain the cause of this issue and the solution. Please note that the CPU-B is still in control and plant is running. Backup LED on both CPU are red which means (redundancy loss) and error LED on standby CPU-A is flickering RED. There is no error in the CPU-A (Control) -we checked this using the GX Developer. Also attached here are the image of the error and error help. Thanks in advance. Battery Replacement procedure.pdf Battery Replacement procedure-Flow Chart.pdf Error.pdf MELSEC QCPU ERROR CODE 6000 FILE DIFF.pdf -
Hi! I would like to ask how could I send data from PC to CJ1M PLC, by SCU-41 module and RS232 cable, in order to activate an actuator (LED)? In my environment, I have a sensor that sends data from PLC to PC (I'm checking data, "HelloWrld" with Putty), with this configuration: And I have another section where I want to read the data from the PC in ordr to activate a LED I would like when I send for example a letter 'a' trough Putty, the LED activates. How could I do that? Thank you very much!
-
Conversion from Integer to float and vice versa
Rajesh Anand posted a topic in Allen Bradley / Rockwell Automation
Hello, I'm using RSLogix 500 application for LAD programming. I would like to convert the float data type to integer data type and vice versa. I tried with the COP instruction as some had mentioned in other forums, but it was not working. So any suggestions on solving that issue would be helpful. -
Dear All, Need your help. I have problem with plc cj2m cpu35. After power trip plc error. Err HE Ip 01..what is mean? plc also connected with one pc using ethernet cable. Any suggestion need to do...
-
Hi everyone! I got this machine with a CP1H PLC and NS8-TV00B-V2 as PT. I was told that they were working fine, but suddenly, It appeared a communication issue: black screen and "connecting..." at right bottom. I dont know if It is a configuration problem or some hardware damage. These are the configuration in the PT and the PLC. The communication is through RS232 Serial. I tried to communicate another PT screen with the same communication settings and IT WORKED!. ' I've been thinking that, perhaps, the serial port A is damaged, I have tried to set port b, but I havent could. How can I configurate PORT B?? THANKS...
-
I'm working on simple structured text program which takes in DWORD values, does some math on them and then outputs in DWORD type. What data type should I be using and how can I make this work? This is one of the lines from the code(everything DWORD) and I get 'operator not supported by DWORD data type' XPos3 := XPos1 + (2*XIncrement);
-
Dear All, Need your help. I have problem with plc cj2m cpu35. After power trip plc error. Err HE Ip 01..what is mean? plc also connected with one pc using ethernet cable. Any suggestion need to do...
-
Hello, I need to connect remotely to an OPC Server DA. In my PC I have installed several OPC Clients but when I try to connect to the server (therefore located on another machine) I get an "access denied" error. How can I authorize the exchange of information between the 2 machines? Thanks
-
HiI have a Panasonic Minas A5 servo drive trying to test in free run a Panasonic A6 servo motor, But as there is a mismatch between the motor and the drive, error 95.0 appears, which declares "motor automatic recognition protection". I'm looking for eliminating this error. (saying that cause in other brands like Yaskawa or some mitsubishi drives this error, known as combination error, can be cleared). I think maybe by changing some parameters this error can be cleared.Any idia?Regards
-
Axis error Error: No device is assined to the required item
Hadi.B posted a topic in NJ Series / Sysmac Studio
Hi, I wanted to run an SMC linear actuator and found this error in axis settings: No device is assigned to the required item. More strange is that I checked one of my old programs in which I ran a Fastech motor (with Ezi driver) by Omron Nj501 series. Everything is OK and the system works. But, If I change "output device 1" in "axis basic settings" to "<not Assigned>" then re-select again my Ezi driver it does not work and I get the same error message. I checked everything. There is no change in the axis settings. -
Can i help you? you can send code conection modul A1S68DAI with DR 700 of mitsubishi. Thanks all
-
Anyone know how I can create a log of results from a Cognex vision system? I have 3 cameras that look at various thinks... clip presence, clip height, clip angle. There are 2 clips per part and 6 parts per tool. This makes it hard to zero in on what I areas I need to tweak. Thanks! P.S. I've heard that maybe their OPC Server could do this but I don't have much experience with it (actually I don't have a whole lot of vision experience at all). From what I've briefly read, I just install the server, set up the tag within the server, start it, and I can just drag and drop the tags into an Excell cell? If this is true, this just gives me another way to read the values. How can I create a database or log of these tags?
-
Hi all, I'm enhancing an Ethernet IP driver but only just learning the ropes in terms of Allen-Bradley PLCs. I'm presently focussing on that part of the driver which specifically supports SLC/500 & MicroLogix 1400, for which I have one controller of each type for testing purposes. I can already cater for a range of standard file types: integer, float, binary, input, output, string, counter, timer, control, status, and this is working well. However, by working with RSLogix500, I can see that there are other data file types which can be hosted in these controller types (dependent on model) and, indeed for test purposes, I have actually created instances of them as follows: ASCII (at A21, 20 elements) for both SLC & ML1400 Long (at L22, 10 elements) for ML1400 Message (at MG23, 8 elements) for ML1400 PID (at PD24, 4 elements) for ML1400 Programmable Limit Switch (at PLS25, 3 elements) for ML1400 Routing Info (at RI26, 3 elements) for ML1400 Extended Routing Info (at RIX27, 3 elements) for ML1400 Now, the driver obviously uses standard DF1 PCCC data types (see below) to read/write individual elements/sub-elements of the file types that I can already support -- and I can see that there's a file type listed below for ASCII. •80 to 83 hex: reserved •84 hex: status •85 hex: bit •86 hex: timer •87 hex: counter •88 hex: control •89 hex: integer •8A hex: floating point •8B hex: output logical by slot •8C hex: input logical by slot •8D hex: string •8E hex: ASCII •8F hex: BCD However, my question is this: since there are no hex file types corresponding to non-elementary data types such as L, MG, PID, PLS, RI and RIX, what file type do I specify in my DF1 PCCC packets to read/write the elements/sub-elements of these six data types ? Thanks in advance.
