Search the Community

Showing results for tags 'domain user'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 27 results

  1. Hi there, I am adding a user login screen to one of our machines. I've already added the user and it shows current user on my string. I want to make the user log in before accessing the rest of the system or continues with normal start up. How do I set this condition?
  2. EasyBuilder Pro question

    Hi! I am using cMT-SVR-100, and i need to get the UserName to my PLC. I have difficulty getting the UserName-Register: PLW-10754 from the PLC (OMRON NX1P2). In the documentation is written register LW-10754 should do the same thing like PLW-10754, but it doesn’t. The approach i found on internet is to use a macros, but PLW-10754 doesn’t support macros. Please help. Any help will be appreciated.   Thank You in advance
  3. Hello, On our DCS we have a button that will open an RDP connection to our PLC server and open the .mer file connecting the DCS to the PanelView HMI. This is supposed to be used for troubleshooting purposes only, but that is not the case. Is there a way to prevent operators from operating the HMI through the RDP while still allowing them to have read only access?   Thanks, Michael
  4. Hello, denizens of Mr.PLC. I'm trying to talk to an old TSX17-20, and have acquired the DOS files for PL7 22. However, when installing via floppy drive, I'm getting a fatal error saying that the User Interface is missing. FATAL ERROR: 251 Your Telemecanique system in incomplete. Ensure that User Interface is correctly installed.   I'm aware that PL722 (and PL7-1/2/3, etc.) require Telemecanique's DOS User Interface to run, but I can't for the life of me find installation files, and, as it is no longer supported by Schneider, no luck getting it from their site. Apparently, it used to be hosted there. Would any of you wonderful folk have the links or files to this user interface? Apparently, PL7 22 5.0/5.1 have never required/no longer require a license. It was a drag to find these files, so I'm posting the PL722 files (in two zips, representing the two floppies) so that there's an easy to find reference for them. PL722D1.ZIP PL722D2.ZIP
  5. HMI user

    Hi! I would like to ask your help. I have a problem with an allen bradley touch panel. I would like to know which user is active. Like maintenance, administrator... Is there any dedicated tag to decide and  to convey it toward the plc (also ab). If there is none. Can anybody suggest an alternative solution ?  Thanks ahead in advance. 
  6. Simatic logon

    hello everyone I have a problem with Simatic logon..  in startup window i have some buttons that have authorization according to their work.. when i work with only user administrator every think is going according to me.. when i enable logon after that login was successful but when i click on button there is messages " not operator authorization " plz help me... wincc user administrator or Windows user name both are identical..
  7. Does anyone have any tips or tricks for generating UDT Templates from an excel spreadsheet? It says in the help files you can copy/paste from excel into the UDT Template, but it seems to only allow that cell by cell, instead of the whole table of data. This is painfully tedious when building larger interfaces. I've tried saving the spreadsheet in various formats (CSV, PRN, tab delimted txt) and I've tried various versions of RSLogix from 23 to 31. I can't seem to find any detailed info on how to do this. I've seen some other forum posts regarding using scripting to generate the XML to import the UDT, but I don't understand why I can't simply copy and paste the info in. Is this really that difficult? Any help would be greatly appreciated. Thanks Otto
  8. Hallo.  Can someone shed some light on how much memory st takes ? does it use more that traditional ladder? i find that a routine with a couple of thousands of lines uses over 500kB is there any tricks to lower the usage? Or is it just what it is, and buy bigger cpu’s
  9. Does anyone have any experience with the recently released user web interface for the iQ-F and iQ-R series. Supported by GX Works3 version 1.047Z or later, the firmware Version 1.100 or later. We have the sample user web interface running in a FX5U, its working very smoothly. I am currently looking into how to edit the html page, does anyone have any tips or useful tools/resources that I could use to work things out.       iQ-F Customer News regarding FW Update 08-2018.pdf
  10. Hi  How can I log the user action  at citect scada 2016 v8.0  I wan to log what the user done on scada like alarm acknowledge, disabiled or eneblied, enter any new valu of signal... ect..   Any Help Will be great  Thanks from now  Best rigards.
  11. PLC Training

    Hi Everyone We are setting up a initial training in PLC programming for technicians, I got some experience with SIEMENS S7 but this seems to be an expensive choice, we would like to opt for a budget PLC but at the same time would like a user friendly software for teaching......I would like to have views of users of other PLC brands such as OMRON, MITSUBISHI or even Schneider??? thanks Jay
  12. Dear All, Currently I am working on a project in which I require a Customized User Dialog..I searched for that in Forum but didn't got any solution..So I would request you all to pls guide me regarding this Asap.. Thanks, Krishnakumar Mishra
  13. Dear All, In one of my projects I need to login in HMI via Windows Linked Users i.e. Domain Users..I have never done this before & don't I have any sort of idea regarding this..This is possible in Rockwell HMI's but not sure about Beijer IX HMI's.. So if anyone has done this pls do let me know.. Thanks, Krishnakumar Mishra  
  14. [Manuals] - 3G3HV User's Manual

    3G3HV User's Manual View File Older Omron AC Drive Submitter Michael Walsh Submitted 10/03/17 Category Manuals
  15. 3G3HV User's Manual

    Version I515-E1-3

    9 downloads

    Older Omron AC Drive
  16. Hi all, I need your help on Factory Talk issue, also for Factory Talk Transaction Manager, I suppose is the same reason.  Windows 7 - 64 FTV SE 7.00.00 FTTM 10.10 I'm Windows administrator. ****************** Factory Talk Issue: Error message: (Error:0x800706ba) Error Failed to load VBA project display cannot be opened at run time. (This is the error to open the first display). Message from Rockwell knowledge database: Error in the OS event viewer mentioned domain controller cannot be accessed to authenticate user. ***************** FTTM Issue: Can't Start with Services. Error message: The Services could not be validated using the specified username....
  17. Input number from user to Compare?

    Hello! I want to make a really simple PLC program that compare 2 number. How can I load 2 numbers from user and send to PLC compare operand? Now I go to CMP and with mouse set values. There is any "imput" component in CX Designer? Sorry my poor english :S Thank you!
  18. Hi everyone, I would like change user password on HMI GTO via Vijeo script. I don't know which variables store the password. Anybody as an idea? Thank you in advance
  19. Hi I have a big issue with machine user access using loggin and password. There are different levels of login (operator, maintenance and admin) locked with physical key or password. The problem is that whenever any other user sees the password or got the key he can use it later. Is there another efficient way to lock the access and may be record who is logged when and how? Thanks  
  20. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  21. how can i make a run time page in vijeo citect 7.4 accessable only by one user ..... please give me detailed steps for this opertaion from creating the user till the end , thanks in advanced
  22. Hello everybody, As many of you can see, I took a course onto development the user libraries, that able to simplify extremely a PLC programming process, to help programmers to increase a productivity of their labor, to reduce a program code and quantity of used system variables, to improve readability of programs. A part of libraries has been already developed and looks fine. Also I full with new ideas, plans and could design new and new that then to share these libraries with other programmers. The work is bringing me a pleasure, however, at current situation I can not allow for me to share the libraries for free. I can explain why. First of all, it takes my time, which is money, and I should feed my family, also the work eats a health, which is not infinitive. The second, those who can get it for free, will not appreciate the labor and will distribute it to the left and to the right. The third, ME has not an interest to my offer, to the products and doesn't want to help to make it available for all. What I'd like to propose to you: If you have an interest, I can offer to open a subscription to the ready and new libraries, which will be developed further. What I can promise and guarantee: I will collect wishes and requirements of subscribers and all can vote, what should be realized at first. The subscribers will can get a release with up to four small libraries or one big (for example, such like Modbus Master/Slave library) every month, that will fit to the requirements and the collective choice. What's a payment for the subscription? I suppose a fee in 100 USD per annum will not be predatory for a subscriber's pocket. The fee will cover costs in case, if the number of subscribers will exceed 70 people. Thanks to all for the attention and I'd like to offer to discuss the proposal in this topic.
  23. ON/OFF Timer for Mitsubishi FX

    FB_TIMER_ON_OFF The FB is a part of RTC library and implements a timer, based on RTC, for ON and OFF a control bit, e.g. to turn ON/OFF a load in the time interval, and can be easily added into your program in desired quantity. The FB is supplied with E (Enable) input, EO (Output to Control Bit), and can operate in one of two modes: HMS = Hours + Minutes + Seconds (daily timer) MDH = Month + Date + Hours (yearly timer) Each setpoint of ON and OFF time settings should be represented as Array of INT [0...2] type and contain a time data according to the chosen mode. Thus, for example: - in HMS mode: a control bit can be turned on at 02:03:14 am and then turned off at 06:04:17 pm, or turned on at 05:12:27 pm and turned off at 07:06:22 am; - in MDH mode: a control bit can be turned on 3th February at 02:00 pm and then turned off 4th June at 05:00 pm, or turned on 12th November at 03:00 pm and turned off 6th March at 10:00 pm. If the values of both time settings are the same, the FB output will not be activated. Supporting PLC CPUs: All FX Program memory: - 34 steps per each FB instance - 4 steps for entire project (reading from RTC) System variables: M - 3 bits (for entire project) The library is compatible with GX IEC Developer and GX Works2 software . https://plus.google.com/105445006108716761629/posts/Z4v4F11s4Bz
  24. Hi friends, I am a little new to WinCC. I am using a WinCC RT Advanced license within TIA portal v13.1 I need a little help in my current project as described below. I am attempting to create a faceplate of a solenoid valve,, The "Valve" is a user-defined data-type with the following 4 elements 1. Cmd - or command. - Bool 2. Cls_Fb - or Closed -Feedback -Bool. 3. Aut - or Automatic Mode -Bool 4. FTC - Fails to close -Bool. I tried the following procedure as described in TIA portal help.. Method -1 1. I created a User-defined data type called Valve comprising of the above 4 bool elements. 2. In the graphics I made a image of solenod valve with one rectangle (solenoid) and one polygon for valve body. 3. Under the Faceplate Properties (See figure attached) I inserted a property ang gave it the data-type Valve as above. However, when I drag a property from the 'Contained objects list' to the interface side, it is not getting substituted. such as the Rectangle_1 's background color I try to associate with the interface property Valve.Cmd. It does not get assigned when dragged. Since this does not work I tried another approach, Method -2 I attempted to declare a variable tag of UDT type 'valve' in the faceplate's tab Tags. I found that it is not possible to declare a local variable of User-defined types here. Please guide me how to proceed. Thanks for looking in and best wishes for your success. Regards, Raj S. Iyer