Search the Community

Showing results for tags 'ddvit instruction'.

• Search By Tags

Type tags separated by commas.

Found 18 results

1. MITSUBISHI FX3UC

HEY, I'm kinda working on my own label machine and i am stuck on deriving its speed. I have already set the interrupt and acceleration parameters. but the problem i am facing is that i can't understand the ddvit's output pulse and output frequency relation to speed. If you guys know something, please do help. thank you,
2. FFL problem

Hi Guys! I have a problem.  I have a leaser sensor, I already set the sampling frequency to 0,1 s. So 1 second I will get 10 data. I need to use the average of the datas. My problem is I dont know how can I solve that, after the 10. data every new data I have to  recount, the last 10 data's average. I think maybe I have to use the FFL instrucion or something like that. I need to solve this problem in ladder diagram. I use RS-logix 5000 software. Anyone can help me?  Unfortunatelly I havent the the software, so I cant show you what am I think.    Maybe the sliding window solution is the right, or is it not related to this? Im a bit confused.
3. ZCP Instruction

Hi group! I am struggling to figure out what I am doing with the Limit instruction (ZCP 088).  I want to turn on a permissive if the compared word is between 1 and 12.  Rockwell makes this so much easier!!! It looks like my "=" instruction is not correct but this is how they show it in the manual???????
4. Logix 500 math instruction with Decimal Point

Hi my problem may have a simple solution but i cant work it out. I need to use the Divide function but it wont let me use a decimal point in either Source A or Source B. Is there a way to use a decimal point in Logix 500 Math instructions? Im using an AB Micrologix 1400 PLC. Can you only use math instructions with whole numbers? is there a way around this? Thanks James
5. Logix 500 math instruction with Decimal Point

Hi my problem may have a simple solution but i cant work it out. I need to use the Divide function but it wont let me use a decimal point in either Source A or Source B. Is there a way to use a decimal point in Logix 500 Math instructions? Im using an AB Micrologix 1400 PLC. Can you only use math instructions with whole numbers? is there a way around this? Thanks James
6. RS logix 5000 motion control

Hi Guys! I have a problem with Motion axis move (MAM) command. There is an Allen bradley servo motor what is working well. But I need to add a new program section, wich is in  a specified moment, the axis should move a certain distance. I think I need to use the mam command, just I dont know how can I configure the motion control part. I need to make a new tag ? or what ? I need to use a user define ? PLS help me.
7. RS5000 AOI Global Output

Hi there, I am trying to create an Add=On Instruction to help me manage some alarm conditions in my application. My AOI has one Boolean output that is used for messaging on the HMI, but I'd like to also have another output (Boolean or integer) that would be attached to o global parameter so that if any alarm is activated, it will create a master alarm that can be used for machine control, and possibly messaging. The reason for this is that I may have numerous alarms and I'm trying to avoid having to create a series chain of all those alarms to turn on a master alarm. My thought was that if I can get any alarm to make a global parameter go true, then I don't have to manage other bits if I delete or add an alarm block. I'm having trouble coming up with a way to create that output that I can have load a TRUE value into a global parameter, though.  I was trying to use an integer so that I could just load a '1' into the variable if any alarm goes off, and a master reset would reset the value to zero. But I'm apparently not setting up the AOI parameters just right. Has anyone got a suggestion of how I can do this? I can share my block if that would help, it's nothing special, just a way for me to condense alarming features and this one seems to be a little tricky. Thanks for your suggestions!
8. Hex instruction is not working

Hello everyone,  I have a code [HEX D100 D200 k6] data is coming in d100-d105 but in d200 it is zero Data in d100-32, d101-32, d102-50,d103-50, d104-52, d105-32  PLC is Fx 3g And I m also not getting value on simulation in d200. Thanks in advance
9. How can I use FOR instruction for Looping this 24 steps in Rslogics 5000 in ladder?

Can any one tell me how to use FOR instruction in RSlogics 5000 for looping my 36 step runs ...for example I have attached a program containing subroutine having 8 steps in it ...can any one help...? subroutine_loop.ACD Ladder of 36 steps.rar
10. Proble with Scale Function in CP1L

I have a problem trying to scale a floating number coming from an HMI to a value to use on PID instructions.My problem is on the scaling instruction.Whenever i try to run on cx simulator it gives me an error My setup of the scale parameters are (using SCL3(487)) D616 #0000 D617 &350 D618 #FFFF D619 #FFFF D620 #0000 My ladder to use the float number is: *F(456) Value +10,0 D2120 FIX(450) D2120 D2062 SCL3(487) D2062 D616 D2072 The error that throws is 0x80F0 Thanks in advance for any help PS Also tried all Scaling instructions.I think my problem is the setup of parameters for scaling instructions

12. Q series PLC conversion from Fx series

Hi all, I would like to know instruction in Mitsubishi Q series PLC which is exactly same as ZCP instruction in Fx series  Please help me out.
13. IR register operation

Hello, Can I add an offset value to IR register? for example, MOVR D0, IR0 and I have an offset value stored in D1, for example, &100, could I add the offset of D1 into IR0, to get IR0 pointing to D100? I know I can just do MOVR D100, IR0, but for purpose of versatility, I want an offset to be added in such a way. Thanks in advance. Xing
14. Connected Component Workbench/Micro800

How would I use "ASC-String Search", ACN-Put 2 strings together, ACI-Convert Integer to String" from rslogix500 and the micrologix series PLC -- with the Micro800 series and "Connected Component Workbench" ?? I'm trying to convert an Micrologix 1100 communication package to the micro800 series. I think it can be down if I can figure out how to convert ASC, ACN, ACI, into functions for the micro800 plc. Would appreciated any ideas/help you can offer. Thanks