Search the Community
Showing results for tags 'datalink cj2m ethernet ip fins communication'.
Found 498 results
-
I am using CJ2M PLC.I want switch on a output for certain time by a timer and holding bit if interlocks satisfied.If interlock not OK timer has to hold the time and output should be off. if again interlocks OK again output has to ON upto balance time completion and has to give timer done output for reset holding bit.please suggest.
-
So I did this simple Function Block, pretty simple, and yet it keeps giving me this error, after a bunch of failed combinations the error persists, without telling me whats wrong. And therefore won't even allow me to download the program to the PLC (CJ2M CPU31) or even simulate. I heard it's a simple thing to fix but I really dont know how to, since I'm quite new to this. Here's the function block itself in the picture and the programming inside it, although since it gives me no errors, i don't think that would be the problem
-
Mitsubishi GOT27* Writing to Allen Bradley local tags (program tag)
Tuang posted a topic in Mitsubishi
Hi everyone, I just want to layout the structure of the question. I have a GOT2000 (GT27* series) that I have hooked up and communicating with an Allen-Bradley PLC. I have established connection and can pull out certain tags values from the PLC program in RSLogix 5000. While I can read the tag values, I cannot modify them (in certain conditions). So let say that I have a User-Defined Structure named "Smoke_Detector" and here are it's available members: Smoke_Detector: - ALARM (BOOL) - ON_TIME (DINT) * DINT in Allen-Bradley but Signed Binary 32 - Battery_Life (REAL) My question is that while I can read and display the tag and its members through the following: - LAMP for Smoke_Detector.ALARM - Numerical Display for both Smoke_Detector.ON_TIME and Smoke_Detector.Battery_Life But when I tried to modify the values via a Bit Switch or Numerical Input, it does not operate on them. However, if these tags are members are just standalone tags, meaning that they are not within a UDT in RSLogix 5000, then I can operate/ modify them just fine. Here are the things that I have tried: * Making sure that the permission are set to Read/ Write in RSLogix 5000 * Making sure that the tag definition in GT Designer 3 follows the structure where @[channel]:[Network #]:[Station #]::[Tag instance and member (e.g Smoke_detector is the instance and Alarm is member] Any possible insight and input are appreciate! -
Hi all ! I need a help about connection between mitsubishi GOT Simple series (gs2110) to kawasaki robot via crossed ethernet cable on tcp/ip protocol. I actually have a fx3g for main unit of my project, and also i have a kawasaki robot for slave unit. My purpose is basically to control both with HMI. I used RS422 between plc and got gs2112 and I want to use a crossed ethernet cable between robot and got but i did not communicate with ethernet even between pc and got. There is a manuel which I found on internet about GOT2000 Connection Manual (Microcomputers, MODBUS/Fieldbus Products, Peripherals) I think i need to work on microcomputer connection (ethernet) subject, what do you think about that ? I need all advices and ideas which come from you. [ROBOT]--------Ethernet--------[HMI]--------RS422--------[PLC] https://electrobit.ee/web/file_bank/Manuals/operaatorpaneelid/mitsubishi/GOT2000/GOT2000-connection-manual-ENG.pdf
-
Hello everyone, I'm a student who recently started programming, and I could really use some help. I have a CPU-31 CJ2M OMRON PLC and a ADO41-v1 analogic card. I need help programming an analogic scale with a bipolar signal -10V to +10V to then control a drive, which will then control the motor. If anyone could help me out of give me some examples I'd be really thankfull. Thanks!
-
Hello All, What are the methods to get the monitoring data from A series PLC? I know its not supported any more, interface modules are not available..., So the basically, If I want to write customer software (may be embedded) what is the protocol I need to follow? I am connected to CPU unit by the way, there is no other modules except few digital and analog interfaces on PLC. Thank you in advance for your direction, direction in any way would help!
-
Hi guys, I have been trying to sync up my RSLogix 5000 tag to GT Designer 3 (GTD3) objects but I noticed that GTD3 only recognize certain native data types from Allen Bradley Logix5572 Controller (Model 1756-L72). In the documentation that I found, it show that certain AB Native Tags are transferable to GTD3 Data Type (See the attached file "AB Tags to GTD3 Tags" ) One of the User-Defined Data Type from the RSLogix 5000 that I am trying to sync to Text Display Object in GTD3 is called "UDT_MY_CLTR_INFO" here is it's hierarchy of inheritance from RSLogix 5000 Name Force Mask Data Type MY_CLTR_INFO (...) UDT_MY_CLTR_INFO MY_CLTR_INFO.NAME STRING MY_CLTR_INFO.NAME.LENGTH DINT MY_CLTR_INFO.NAME.DATA SINT[82] In my exported tag which is a CSV file, it doesn't list the sub-classes MY_CLTR_INFO.NAME, MY_CLTR_INFO.NAME.LENGTH, and MY_CLTR_INFO.NAME.DATA, it would only list MY_CLTR_INFO. How do I link up my "Text Display" Object in GTD3 with the tag "MY_CLTR_INFO.NAME" whose Data Type is STRING and GTD3 does not have a STRING Data Type? I appreciate anyone that took their time to read my problem and any attempt to help me out. Thank you.
-
Does anyone have an .eds file for the Zebra printers. I need to use ethernet/IP from a CJ2MCPU31
-
I have 6 PLCs CPM2A and 4 PLCs CP1LM I'm going to network them to do the supervision and data acquisition from each PLC and connects them to a pc via an ethernet port So what are the hardware and software used?
-
What am I doing wrong? I have an FX3GE PLC. I have set up the IP address 192.168.3.254 and I am able to connect with my laptop running GX Works2 version 1.501X. I also have a GS2107 that I have set up with IP address 192.168.3.18 (Default). I can communicate with my laptop running GT Designer3 version 1.151H. The HMI is still failing to communicate with the PLC. I have followed different threads on this forum, tried different port settings on the HMI. I have attached my settings. Is there anything else I need to set?
-
Who Have Someone connected Citect with Omron CJ2M CPU32 ? Can i use it? Device communications wizard -> CJ Seres PLCs -> Ethernet or need to Finsgateway software. [Setting] 1. Boards TCPIP / 0(Address) 2. Port -I192.168.100.10 -P9600 -U (*PLC: 192.168.100.1 , PC: 192.168.100.51) 3. I/O Device 0/1/1/ / OMFINS3 [MANUAL] ----> Fallow the manual ONLY CS1, CV Need to setting w/n/u/V or w/n/u/S CJ2M do not need to this setting ? I/O Devices Form Complete the I/O Devices form as instructed, with the following specific information. I/O Device Address The station address for an Omron CV Series PC is specified as follows : w/n/u/V for CV mode or w/n/u/S for CS1 mode where w is the FINS network address (1-127) n is the FINS node number (1-126) u is the FINS unit address (0) There are no defaults for w, n, or u, but if you do not specify a mode (with a V or S), it will default to CV mode. The FINS node number should be the same as the IP address node number. The FINS network number should be the same for all ETNs on the Ethernet segment. There is no relationship between FINS network numbers and IP network numbers. Thank you..
-
We have been successful using the EIP4CCPU module in communicating Ethernet IP between Compact Logix And Mits Q PLC's. Always with the Allen Bradley as the master. However, we are presently trying to control a 520 PowerFlex VFD from the Q series as master. Has anyone attempted this?
-
I am trying to use FINS/UDP network to communicate with a Siemens device (at a customers site over seas from my home office), today I attempted to set up a SEND command based on information my customer received from a local Omron representative but had no luck. I feel like I am missing something in a setting somewhere, does anyone have experience doing this? I am using a CJ2M-CPU35's built in Ethernet IP port which is also communicating to 5 other Omron devices over Ethernet IP, so I am wondering if there is an issue having both networks. Thank you!
-
Hi We got 2 laptops Laptop1 communicates with a CJ1M and a C200H PLC. No problem. Laptop 2 communicates only with the CJ1M, Not with the C200H, Same program, same conditions. I also tried with "Direct online" but no succes How can I get laptop 2 also to communicate with the C200H? Thanks
-
M251 COMMUNICATE TO A BARCODE READER
Ricardo Vargas posted a topic in Modicon / Telemecanique / Schneider Electric
Hello, I need to communicate a Datalogic Qw2120 ( with a USB connector ) to a Modicon M251, it has a RJ45 Serial, i don´t know where to start , can anyone please give me a hand ? I would appreciate it very much. -
Any tool to simulate Ethernet/IP for omron PLcs? I need to know the complete packate structure for Omron Ethernet/IP over Omron PLCs. I have read that we can use FINS command inside Ethernet/Ip packet . But how to get full pacakte structure. Please help , it is urgent.
-
M251 COMMUNICATE TO A BARCODE READER
Ricardo Vargas posted a topic in Modicon / Telemecanique / Schneider Electric
Hello, I need to communicate a Datalogic Qw2120 ( with a USB connector ) to a Modicon M251, it has a RJ45 Serial, i don´t know where to start , can anyone please give me a hand ? I would appreciate it very much. -
Hello I'm quit new in this world and i have several doubts about the comunication of EIP. I'm trying to capture the comunication betwen a CJ2M and an NS8 HMI. I was trying with MolexEIPtool, so i could understand better the communication process and i did a little. Here is the wireshark capture of an get all attributes request: CIP_Molex_tool.pcapng (The last two packets are another unconnected request). I can see the request for list services, the register sesion request and the Forward open request. Then, i can see the request for service "get_attributes_all" and how the cj2m responses with all the attributes. Finally, the forward close request. But when i put my computer betwen the two devices, i cant figure it out what is happening. Here is the capture: CIP_OMRON.pcapng I can see that the packets are "SendUnitData", so i think it is a connected transmision, but wireshark cant decode the rest of the frame, so i dont know whats going on. Thanks
-
Dear all, i have using nexgenie 1000 cpu for my new project. but i am not able to connect with codesys v2.3 . I have installed target file T1.4 and T2.4. trie with both. Now i have doubt with communication cable. I have used standard RS232 Cable with 5and 8 Pin short. Kindly suggest the correct one. Thanks in advance
-
RSLinx ethernet IP driver with Red Mark
efraga posted a topic in Allen Bradley / Rockwell Automation
Hi, I've been working with RSLogix 500, today i found that i was unable to connect to Micrologix PLC because in the RSLinx the Driver Ethernet IP that was configured to communicate whit PLC appears with a Red Cross. Yesterday everything was working. I've installed an antivirus software, i supposed the reason was the antivirus, but i've tried on configs and even uninstalling it, and RSLinx seems that can't reconigze the ethernet adapter (guess that means red cross) RSLinx 3.51 CPR 9 SR 5.1 RSLogix 500 Pro 9.0 Windows 7 Ultimate 32 bits Could you, provide to me some guidelines to solve this, or if somebody has had this problem, could share the solution? thanks in advance -
Hello write now i am working with Q6UDEH PLC project in which (nextgen 2000) 6021 card is used for conversion of serial to Ethernet data & vice versa , is it possible by only installing the Mitsubishi serial drivers ?? or can anybody tell me how these Mitsubishi serial drivers works ??
-
Hello write now i am working with Q6UDEH PLC project in which (nextgen 2000) 6021 card is used for conversion of serial to Ethernet data & vice versa , is it possible by only installing the Mitsubishi serial drivers ?? or can anybody tell me how these Mitsubishi serial drivers works ??
-
Hello everyone, I need the help to do setting of datalink between CJ2 and LOGIX-5324ER. The Allen bradley PLC was programmed by contractor and I have no software of it, so I am doing the network setting in CX-one network configurator. I tried to do the instruction in the Quick Start Guides on Downloads section here under Omron, but I couldn't find the option to register tags in network configurator. Is there anything wrong here? or is it possibly because of that they not support to do a datalink in these version of PLCs? They appeared like these in the pictures.
-
I have a Mitsubishi MES US network module ( QJ71MES96US ) connected to an Ethernet remote PLC (through an Enet switch). I'm not sure if this matters, but the remote rack has a Q PLC and an Ethernet master module kit (Q03UDECPU-EIP-K is the kit that has a Q03UDECPU and EIP4CCPU next to it). I am wondering if and how we connect the MES to a Q PLC over Ethernet to pull data. A coworker has configured the MES US module to talk to a PLC in a local rack, but never to a remote rack. If anyone can assist, or even reference a manual that would be appreciated, thank you.
-
In a certain area of our facility we have several machine that manufacture a handful of products. These machines were built at random intervals starting in the late 80's and consequently have a range of different PLCs that are used to control them (SLC 500 to ControlLogix L61). The other areas of our facility use a server that has a historian installed (Canary) and the client (Axiom) is installed on our computer so we can view data trends in real time. I would like to network our PLCs mentioned in the first paragraph to this historian to gather production and maintenance data. I know that I need to network these devices through an OPC server (which we have). Several of these devices have been connected through DH+ and/or Ethernet networks in the past but are no longer connected. We recently connected some of the DH+ Devices to the Ethernet network (just to see if we could) with a Prosoft AN-X2-AB-DHRIO. My questions are: Are there any best practices for networking devices with different protocols, i.e. DH+, Ethernet, etc.? Is the way we have it set up now (with the Prosoft DH+ to Ethernet bridge) a robust (scalable, etc.) solution? Is there a better way to do this? Is it worth getting EtherNet/IP cards for the PLCs that don't have them? If anyone has any experience with a similar scenario, insights/advice would be much appreciated
