Search the Community

Showing results for tags 'converter'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 4 results

  1. Communication

    good evening. Someone can give tips on how to configure and physical the application with the following items: Advanced Interface Converters (AIC +), PanelView800 2711R-T7T A and MicroLogix 1500 Programmable Controllers My doubts are about the configuration of the communication, and I have doubts about the physical environment and protocol to be used.  
  2. CX Supervisor Modbus RTU

    Can CX Supervisor be used as modbus RTU master using RS232/RS485 or USB/RS485 converter to connect it to PLC or panelmeter or other modbus slave units and how? Any example? Thanks in advance Goran
  3. I'm trying to connect a 2711-K5A8L1 FRN 3.13 PanelView 550 (DH+ three wire connector) to a 1747-L553 SER C REV C (RS232 and ENET). I read that I may need FRN 3.3 on the PanelView 550 to do a passthrough. This will be a dedicated connection with no other devices. The PanelView 550 has only the three wire DH+ connector and an RS232 printer port. I was trying to connect PanelBuilder 32 to the RS232 port and may only have PRINT and DOWNLOAD capability on this port. Is there an inexpensive way to connect the PanelView 550 and the PLC CPU? Something like the 1761-NET-AIC would be fine, but I did not see an option for DH+  .
  4. frequency converter

    Hi guys I Have Question of Propo variator converter that there kind of drives her PHASE IN (230v) AND Nature / OUTPUT TO THE ENGINE 3 PHASE (UVW)? -or if required entry 3 phase (RST) and output TO MOTOR 3 phase (UVW)? I would be happy to answer :)