Search the Community

Showing results for tags 'controller tags'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 80 results

  1. Hi everybody I have a elau c400 controller trying to connect it to a mc-4 pacdrive. But I realized that the wd led on my c400 is on and it can be a fetal error. Anybody has this experience? Regards.
  2. i want to connect omron vision controller fh l550 with Soft PLC (IPC) from Siemens  through Ethernet or  RS232c interfaces, should i use a unit for the communication or can i directly connect the Omron Controller with IPC ?  the IPC is connected with other devices via profibus .

  3. Mitsubishi PID controller design help

    Abdul Haseeb posted a topic in Mitsubishi

    Dear all, I need help in design of PID controller in Mitsubishi PLC fx3u, I what should be parameters for initial, and how to start and stop auto tuning.
  4. Hello,, I have motion controller A series A172SHCPUN,, I have written the program ladder into the CPU, but I can't write the motion program.. i dont have the program to open file the program motion and I want to ask if I have the software SW3RNC-GSVE, my os computer is window XP, Can it be installed? and is the cable transfer used the same as the ladder transfer program cable (SC09)?
  5. Hello everyone, Working in Automation for the first time as a Co-op student so i'm fairly new to PLC's and the Automation field in general. I've recently been tasked with converting a RSlogix 5 program from an old PLC 5 project into a Studio5000 project. I referenced the manual (I'll attach link below), and had no issues using the RSlogix Project Migrator tool that I downloaded off the Rockwell website. My problem is that once I convert the program, my I/O tags that were originally sequenced in octets(0-7, 10-17, 20-27, ...) from the RSlogix 5 program, are switched into a sequential scheme in Studio5000 that just increments them in order (1, 2, 3, 4, ...). I hope this make sense, but basically the first seven tags match between the projects, but then I:010 in rslogix 5 is equivalent to I[8] in 5000, I:011 is I[9], and so on and so forth. Has anyone had this issue before and found a way to have Studio5000 keep the original octet scheme? I don't see this normally being an issue, but the customer has specifically asked that the I/O tag names be kept the same as the original program. Thanks for any help. - Ben   Converting PLC-5 reference manual link: https://literature.rockwellautomation.com/idc/groups/literature/documents/rm/1756-rm085_-en-p.pdf

  6. RedLion G303 Tags avalible

    andrea posted a topic in Other PLCs

    Hi How many tags are available to be used in a  RedLion G303? I added a new tag  from  a PLC that is on line with other tags ,, but it says it is not available?

  7. Pls help set up QD75P4N

    Choi07 posted a topic in Mitsubishi

    Good day sirs,  i am a newbie at this motion controller setting. I would kindly like to ask for an assistance from all of you. i copied all the necessary data that i have on this project. I installed the wiring correctly i am able to Jog the servo motor. But when i try to Jog the motor Using GXWorks 2 i wasn't able to do so because its not showing any movement on the Mr J4 and the motor it self. is there any settings that i should have change? thank you for the time if you will need any information i am willing to give it thank you   I have also attached the GXworks program and the servo conifiguration   Please help me thank you project 1.gxw Servo 1.mrc2
  8. Respected Friends, Good day. I face a serious issue please help me to fix the problem.  We have a 1756-L55/A controller with 1756/M13 A memory card. after 2 or 3 months the program washout and the LED status on the controller are following 1. RUN --- SOLID GREEN 2. I/O--- OFF 3. RS232 --- SOILD RED 4. OK --- SOLID RED 5. BAT-- OFF 6. FORCE-- OFF  At that time CONTROL NET MODULES OK Light for Chanel A and Chanel B are also blinking and communication not established via control net and serial port AB-DF1. I switched off the power supply and after 10 second again power up the controller then OK LED becomes solid green.  i download the program and its run fine. But the problem is still there. In the controller properties the major fault shows  TYPE 01 [ POWER UP FAULT] CODE 60 [NON RECOVERABLE FAULT] what are the possible reason for wash out the program from the memory?  At that time version 16.03 firmware installed and the rslogix program convert from version 10 to version 16.03.  Is 1756 L555/A with 1756/M13 A support the version 10 firmware? i ask because the original program is in version 10 if its supported then i update the firm ware and download the original program.   Hope you will help me in this issue. Regards
  9. I have multiple PVP 1500's on the same network. From the one in my control room i need to be able to see what user is logged into what HMI. How would I address the system tag of another HMI on the same network would I use the IP address? thank you for any help in advance
  10. Hi everyone, I just want to layout the structure of the question. I have a GOT2000 (GT27* series) that I have hooked up and communicating with an Allen-Bradley PLC. I have established connection and can pull out certain tags values from the PLC program in RSLogix 5000. While I can read the tag values, I cannot modify them (in certain conditions).  So let say that I have a User-Defined Structure named "Smoke_Detector" and here are it's available members: Smoke_Detector:   - ALARM (BOOL)   - ON_TIME (DINT) * DINT in Allen-Bradley but Signed Binary 32   - Battery_Life (REAL)  My question is that while I can read and display the tag and its members through the following:   - LAMP for Smoke_Detector.ALARM   - Numerical Display for both Smoke_Detector.ON_TIME and Smoke_Detector.Battery_Life But when I tried to modify the values via a Bit Switch or Numerical Input, it does not operate on them.  However, if these tags are members are just standalone tags, meaning that they are not within a UDT in RSLogix 5000, then I can operate/ modify them just fine.  Here are the things that I have tried: * Making sure that the permission are set to Read/ Write in RSLogix 5000 * Making sure that the tag definition in GT Designer 3 follows the structure where @[channel]:[Network #]:[Station #]::[Tag instance and member (e.g Smoke_detector is the instance and Alarm is member] Any possible insight and input are appreciate! 
  11. Hi Guys! I have an another question , I hope you guys can/want to help me. I have some problem with an proface panel. I want to make a hisotrical trend, but when I want to select the channels (tags what I want to monitor) I can't select anything, because undetermined. I think I should set the tags kind of a buffer list, but I don't find it. So my question is how can I set the tags. I can't changed it at all. If the answer is I need to make a buffer list, then where can I find it ?  Thank you so much. 
  12. Hello i'm new in all things about plc, i do a project for school and i use a festo fc 34 plc. The plc is programmed via serial port RS232 my pc not support a serial interface and i use a RS232 to usb adapter. when a try to download the program to plc give me a error: "ERROR: Cannot access controller".  What i do wrong.  Thank you in advance and sorry for my English. Have a nice day.
  13. Any new tags I add in studio 5000 the HMI project shortcut cannot locate the tags, it says unresolved route to processor. It's the same shortcut all of the other tags are using. Please help. 
  14. This is my first time to the forum and I am still very new to plc programming. I just had to move all of our software over to a new computer ( kind of new) it's running windows 7 pro. The same is as the computer before. Same computer name, same I'm, same file directory. However when I add tags in studio 5000 and reference them in the HMI, it says it is unresolved in route to the processor. It only does this for the new tags. I used the same shortcut and everything so I am at a complete loss here. What do I do.
  15. Hey guys,   I have worked on the FTView ME platform many of times.  I am now working on a FTView SE (Local Station) application, and I am having trouble connecting an Offline .ACD file to my program so that I can design.   If someone could help me with this it would be greatly appreciated.   Thanks in advance!
  16. Hello,  I have a micrologix 1400 plc connected to a length measurement gauge. The gauge sends an analog value to the plc to an analog input. I convert the value into a dimension and send it to F8:0. but I need this value in three different steps in the program. Since i just have one element of float (F8:0) is there anyway i can store the value in a different location or create more floating point tags eg. F8:1. F8:2 ?    Thank You   

  17. Keyence CV-X Controller and Siemens S7-1500

    PLC_007_BOND posted a topic in Siemens

    All, I am using Keyence CV-X422A vision controller for my application. It is interfaced with Siemens S7-1500 PLC on PROFINET. I am able to communicate with Vision controller through PLC logic command and status IOs. There is some communication issue in updating the o/p values from Camera Controller. I have tried with & w/o Handshake Mode with these settings. The camera display shows the reject but camera never turns ON the NG Status o/p. I tried different things told by Keyence Tech support but none of them worked.  He told me to have you enable the “Result ACK Flag” in the bit allocation area and send  a signal to it. Then trigger it again with a no good part and see if that fixes the issue. I tried setting the “Result ACK Flag” to 1 after I get the “Command Complete Flag” for the trigger signal that I sent. Sometimes this works but still it is not reliable. Do I need to send only a pulse to “Result ACK Flag”? Anyone here has ever faced similar issue?  Thanks for your help. AP
  18. could you tell me how to create internal tags in DIAview and how to dynamically change the colour of any object taken in SCADA  
  19.   Hello, I want to regulate the temperature by a thermocouple type T with an OMRON control module TC001 / 2/3 and a CJ2M CPU14 series PLC using CX-Programmer as a programming environment. Could you provide me with an example project? Thank you for your help.
  20. Hello, is there a way, to edit E5CC-T temperature controller internal program, using CP1L-EM PLC, connected to temperature controller via rs-485 communication? I can't find any information about doing it. I know that i cat change these programs, using CX-Thermo, but that is not an option. I need to do that, using only PLC..
  21. I'm making this thread, continuing from my previous one (Newbie Screwed Up) where I received tremendous help from those on this forum.    I now have the AB 5/04 working, but the Panel Mate 1700 doesn't seem to communicate with the 504.  The HMI connected to this brick is a Cutler Hammer Panel Mate Pro 1700.  It lights up,  the touch-screen buttons somewhat react to touching (might take a few strokes to react), but the functions do not react with the 5/04.  I called the equipment manufacturer, and they basically said it is all obsolete equipment, no longer supported, etc. and we are SOL. But, for a mere $100K, we can send the unit back, and they'll install all "modern" control units !! Not an option.   I get it that the unit is 10+ years old, but has very low cycle times on it.  (maybe 400 hrs)   It's my understanding that the  HMIs are just that....a means of the operators telling the PLC what you want it to do. So, my question .... is there an off the shelf software package that would emulate the Panel Mate 1700?  All I need to "control"  is to advance or retard two sets of heat seal rollers (via PacSci stepper motors), actuate two separate hole punch solenoids, and an air solenoid for a knife....it's basically a packaging machine.  I do have a program called PMConfig , but I don't see any communications buttons or icons in that software, just screen shots of what shows up on the HMI, icon selection, change fonts / colors, etc.  So, I'm looking for a resolution to make new(er) HMI (or even just a cheap a$$ laptop)  with affordable software, and easy interface to communicate with the now functioning 5/04.  Thanks for the input.
  22. Hello I downloaded a .mer file on the Panel view 1000 but it shows errors on the display graphics. i have configured the Rslinx communication several times by selecting the rigt PLC in Design and Runtime mode. I am using Facotry Talk view 8.20 and creating 5.10 runtime file. Please advice. I was able to correctly download and use the HMI on a similar machine. I dont know what am I missing on this one.    Thanks Pratik Jain

  23. GXWorks2 Label changes

    andy_a_j@tiscali.co.uk posted a topic in Mitsubishi

    Hi Sorry if this has been asked before but I have done some searching and couldn't find any answers in the forum. If I have a label that I use in my ladder, I can edit the address of the label any everything works OK (i.e. the ladder references the Label and not the direct address) If I need to change the text of the label, but keep the address the same, the ladder fails as it is using the label as the reference to the address. Is there anyway I can change a label and have it automatically update the ladder with the change  e.g. lets say I have a label called 'counter_1' which is used throughout the ladder code. If I want to change the name of the label to 'counter_A', I can alter it in the Global Labels (the excel type thing), but then have to update it manually everywhere in my ladder. any help would be much appreciated thanks Andy    
  24. Hi everyone, Recently, I started working with the Micro820 Controller Embedded I/O. My project is simple : when the output _IO_EM_DO_00 is set to true, an LED light turns on. But, even though it's super simple, I can't make it work. Here's my setup. If you need more information, feel free to ask anything !
  25. Hi Here's a question I'm about to ask Omron.. as soon as I can figure out who to ask.. It's complicated asking support.. their web email form doesn't make complex questions easy. Here's the question: Can the NJ CPU program a LinMot linear motor to make the "Random Sea"? The NJ has a mixed protocol.. Ethernet/IP and EtherCAT (CoE),  and claims to be a "Motion Controller".    I doubt Motion Control is available on it's Ethernet/IP line.. but the EtherCAT might be another story.   Certainly The Omron NJ is a Motion Controller for Omron NJ series drives.. However, how well does it work with LinMot? Here's the curve.  Imagine a LinMot Linear motor continuously moving, never really stopping, following a real-time, mathematically generated curve, moving positive then negative, at random frequencies and random amplitudes. Almost never repeating a motion sequence. looks something like this: Yet, after a while the motion history fully represents the spectral distribution of energy on the surface of the ocean. Spectrum analyzers can display it, and mathematics can define it..  I just have to make that sea in a model scale…    (Time scales by the square root of the scale factor) And keep the water in the tank: https://www.youtube.com/watch?v=SQd6YzBWVvI The big question is: Can the Omron NJ get a LinMot Linear Motor to do this? … LinMot thinks YES.. but, isn’t sure. Yes there are ways to “connect" LinMot to The NJ.. EtherCAT (CoE), Ethernert/IP but… there is nothing in the LinMot drive that can create or store a predesigned Random Sea .. Only a Motion Controller, generating real time motion commands, by running  mathematical equations, "on the fly” can do that.   If the NJ is a true “Motion Controller”, and the LinMot C1250-DS-XC is implemented as an “axis” by Symac Studio, which it is…       Then, there may be hope. Closed loop, PID feedback remains with the LinMot drive, with special settings in LinMot Talk … Homing might have to be done with the NJ .. or by Digital I/O’s What do the Omron experts out there think?  Can this be done? Thanks much, Regards, Michael