Search the Community

Showing results for tags 'cimplicity ms excel'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 43 results

  1. Reporting for Siemens PLC

    Hello, We want to do excel reports on Siemens PLC. We do not want to use historian programs. Do you know another programs?
  2. LOGO For Excel

    Version 1.0.0

    22 downloads

    LOGO For Excel allows you to retrieve, view, log and write data to one or more Siemens LAN connected LOGO! 8 basic modules using Microsoft Excel without the need of a touchpanel or any other hardware or driver. Configure in no time Excel spreadsheets that contains live LOGO! data.
  3. View File LOGO For Excel LOGO For Excel allows you to retrieve, view, log and write data to one or more Siemens LAN connected LOGO! 8 basic modules using Microsoft Excel without the need of a touchpanel or any other hardware or driver. Configure in no time Excel spreadsheets that contains live LOGO! data. Submitter progpro Submitted 03/25/22 Category Demo Software
  4. S7 Excel Connect

    Version 2.0.0

    60 downloads

    S7 Excel Connect allows you to read, log and write one or more Siemens S7 PLCs data using Microsoft Excel. This can be data from a datablock, marker, input/output as well as digital as analog (not peripheral), timer and counter. S7 Excel Connect can be used for many uses ranging from a reporting tool, to a tool to write recipes to any S7 PLC.
  5. View File S7ExcelReader The S7ExcelReader Add-In enables users to load and work with data from a profinet connected Siemens S7 PLC. The retrieved S7 PLC data can be used to visualize proess data, create custom reports, perform complex calculations on process data, … . With one click on the refresh button, all the data of one or more S7 PLC’s are refreshed in your worksheet. Download your free trial of S7ExcelReader today! Submitter progpro Submitted 11/03/21 Category Demo Software
  6. Hey guys,   I know this is a topic that has been discussed before, but I am having trouble finding exactly what I am looking for.. I want to know the most efficient way to record data from my PLC to an Excel file on my PC. I want this to be done without the use of the PLC's webserver.  Specifically I am trying to record vfd speed every 10seconds with a time and date stamp. How can I do this?   Thanks, James  
  7. Here is a step by step tutorial... Utilizing the CX Server DDE Manager will allow us to provide a link to the information in the Omron PLC. This link can be placed on an Excel spreadsheet. Charts, graphs, etc. can be made from the data. We will create links on an excel spread sheet from a CQM1H and a CP1L PLC. The information will then be displayed as a bar graph comparing the first ten memory areas. Here is a step by step tutorial... Watch on YouTube : Implementing the Omron CX Server DDE and Excel Let me know what you think. Regards, Garry
  8. Hi, guys.I am struggling to develop a solution for a costumer in a Historical Alarm Viewer screen, I am new to Cimplicity and to database supervisory interface. Among other things, the customer is asking to:- Change the "A"; "R"; "G"; "N" notations under "log_action" column to somenthing more intuitive for the users (operation). Please have a look at the image "image.jpg";-Change the point manager process "MASTER_PTMR0_RP" log under "logged_by" column to the user that is currently logged in. Specificaly saying, when I send a command (changing a setpoint or issue a reset command, for example), although it is the user acting, the historical alarm viewer logs the action as "MASTER_PTMR_RP". I Imagine that is because this process is reponsable for exchange point data to/from the IHM points database, but it is still essential to the system administrator to know which user sent that reset command or changed the variable setpoint.The log inputs at the image "image.jpg" has boolean and integer commands (".CXX" sufix);-Log into the historical alarm viewer if the user logs out and what user logged in.It is valid to mention that I am using the ALARM_LOG table (apparently it is the only table working with the application, DATA_LOG, EM_LOG and the others simply do not work, they don't show any column at all, honestly I don't know why).I tried to use Microsoft SQL Server Management Studio to edit the table information, but, somehow, it seems to be blocked to edition.I imagine they are some specific configurations, but I have no idea on how to acomplish them. Maybe if I could use other tables would fulfill the requirements, but , like I said, they are not working (right now I am trying to re-configure the Database Logger from the beggingin to see if it works with other tables).If you could give me some inisights on how to change these settings I would be very grateful. I will be happy to give more information if needed.Thanks in advance.
  9. I am now part of a startup company based on energy optimisation of HVAC in buildings. I am assigned to have research on which SCADA system to select for HVAC energy optimisation. The model is in such a way that, we need to create a SCADA / HMI for the client's building on top of existing Building Management System (BMS) to achieve energy saving.  I am still an intern and I am requested to research on various SCADA options available in the market. I have few doubts regarding: 1. How can I select one SCADA / HMI over the other?  2.GE Cimplicity and Niagara 4 are two option which I am interested in. What is the major difference between both? (Price and functionality) 3. Is Tridium Niagara 4 a SCADA software? ( I read about it but I didn't understand as I am new to this field). Is it same like tia portal which is a software that is used to program plc and create user interface??
  10. Hello, I am new to Scada Programming. I am using Citect scada V7.50. I have completed whole project, but I am unable to generate Excel report for Alarms generated during run time. Please help me for this issue. Thanks...
  11. Do you have a known ac repair expert in contacts who can help me fix the issue i am having with my air conditioning unit?
  12. I'm a young Controls Engineer at an integration company, and I need assistance.   I have a client that has about 330 different alphanumeric product numbers broken down by length and width. The operator must be able to select the product number at the HMI to pass along to the robot we are integrating. Is there a way to be able to have the operator select the product number simply, without having to scroll over 300 items in a single control list. The HMI is not chosen yet, so it can be GE, Rockwell/AB, or Automation Direct, but we are using a AB ControlLogix Processor. Racking my brain and I have little VBA/Scripting experience.
  13. Hello Dear Colegues. I am using historian 7.0SP6 (enterprise license). I have installed OPCAE collector to collect alarm and events data from a project in cimplicity in order to have an historical data of it. Also I have checked the Historian OPCAE interface box in the cimplicity project´s properties. The problem is that when I try to see the tags from OPCAE collector on historian administrator I have the following error "No Tags Matched The Criteria You Have Entered. Please Try again or Cancel your Search". Also, I am not able to see the "last 10 alarms in the collector´s configuration tab. What could causing this problem?
  14. sthilaire

    Does anyone have any idea how to set up an OPC server in FactoryTalk SE for Excel?  I'm trying to move data from a spread sheet to the PLC.  Got it working in excel now I'm trying to initiate the transfer from SE. 
  15. Hello,   Target:  I'm looking to make an excel macro that will take an IP address and pull the components on that specific backplane. Pretty much how RSLinx Classic OEM does it, but it will save me a lot of time if I could automatically put the results into excel. Example: Enter IP "111.111.111.111" into excel, run the macro, and have it fill in the components on the backplane below. 111.111.111.111 00, 1756-L73 LOGIX5573 01, 1756-EN2T 02, 1756-DNB 03, ... 04, ... Any help that could get me toward this would be amazing. I'm just not sure of the code that would do this.   Thank you, MalSmith21
  16. My project is to read an RFID tag (ascii) with a Micrologix 1400, send the string to a PC using Ethernet/IP, lookup and compare in an Excel spreadsheet, and send back data (probably an integer) for the plc to use to control direction. I have to scan and compare an RFID tag to a list of 1400 possible part numbers, at different locations (more than 1 plc). I want the several PLCs to go to a single PC to make it easy to update when changes occur (on a weekly basis). Has anyone done anything like this? I'm assuming there will have to be some kind of vb or c+ application involved.   Thanks,  CK
  17. Does anyone have any tips or tricks for generating UDT Templates from an excel spreadsheet? It says in the help files you can copy/paste from excel into the UDT Template, but it seems to only allow that cell by cell, instead of the whole table of data. This is painfully tedious when building larger interfaces. I've tried saving the spreadsheet in various formats (CSV, PRN, tab delimted txt) and I've tried various versions of RSLogix from 23 to 31. I can't seem to find any detailed info on how to do this. I've seen some other forum posts regarding using scripting to generate the XML to import the UDT, but I don't understand why I can't simply copy and paste the info in. Is this really that difficult? Any help would be greatly appreciated. Thanks Otto
  18. Hi Guys! A have a problem with Excel and RS linx. I belive the communication is good. I just need a few tips, especially with excel. I have about 3000 dint value, and aI dont know how to put them in excel at once. Not one by one. THis is my first question. You can see the link: =RSLINX|MC!'Database_fifo[0].Motor_rpm, L1,C1' the next one is =RSLINX|MC!'Database_fifo[1].Motor_rpm, L1,C1' and =RSLINX|MC!'Database_fifo[2].Motor_rpm, L1,C1' and so on. I dont want to write the numbers like 3, 4 ,5 ...2560... So I hope you guys get it, sorry for the bad explanation. For this problem maybe exsiting some macro or something like that, I dont know. The second: there is some dint what is in decimal style, but acutall they are ascii, I know how solve that, with the char function, but I dont know how to collect it. Like on the picture, there is the numbers what I read from the plc, like 82 equal to R. But I want to see them in one cell. Like RKBF-355, I want them in a same cell. Unfortunaltely I cant solve it. At least until now, and I hope somebody know it by memory.    Thank you in advance!  
  19. Excel import

    Hi, i have excel file with 2 columns and cc 300 rows (saturation curve). How to import excel file in GX works 3 (R04CPU) and use data as two array variables [0..300]? I want to avoid manual writing around 600 values. Thanks  
  20. Dear Everyone can help     i have a batching system of about 12 materials and i need to generate a report for all batches in the day in runtime, i tried using SQL with Cicode but sometimes i can't find some material's data or to be Zeros. did any one here know a way to do that?? vijeo citect 7.4 thank you
  21. Cimplicity Auto Report Generation

    Dear All, I am having a problem with my cimplicity Auto Report Generation, When I Click on Generate Report, it shows "0 values collected" does anyone knows what's possibly could gone wrong here ??
  22. Hi Guys! I have a problem with data collection. I use RS Logix 5000 software. I need to collect 11 int value. The sampling frequency is about 2 or 3 second. I tried to make an array but I faild, because I dont find what is correct for my task. I need about 5000 sample each of int value. Anybody have any idea about this problem ? If I have the datas then I have to exporting to an excel table . Thank you if anyone can help me.   T
  23. I am starting my own consulting business, so put my experience and technical know-how to work and ensure the success of your process control projects.  No project is too small!  I hold a Bachelor’s of Science in Electrical Engineering from The University of Arkansas, and obtained an Arkansas PE license in 2014.  After working for a Generation and Transmission company as a power plant controls engineer, I have decided to put my skills and experience to work as an independent consultant.  My SCADA/HMI experience includes GE’s Proficy Cimplicity software, and Rockwell Automation FactoryTalk View SE.  I also have experience programming controllers using GE’s Proficy Machine Edition, Rockwell Automation Studio 5000 and RS Logix, and Emerson Delta V. Check out my LinkedIn profile at https://www.linkedin.com/in/trevormarmstrong for more details regarding my experience and past projects. Contact me through these forums, LinkedIn, or via email at tmarmst@gmail.com any time for more information on my services or availability.
  24. I currently have certain amount of Recipe data located in form of Excel file on to a PC with static IP address. Is there a way to get that data inside the Nj501 without using an SQL server as I currently have NJ501-1300 which doesn't support SQL. I am okay to send data to the SD card I currently have on NJ PLC as it is easy to get data from SD card to the NJ501.  If there is any example code or a link that helps me create i would be helpful. Thanks in advance. FYI: I am currently using NB10 HMI with NJ PLC.
  25. I am using MX sheet version 2 to gather some PLC data. All is working great but I decided I wanted to change the Automatic Save settings and it wont open the window.  As in I click the Automatic Save Icon in the sheet and nothing happens.   Same thing if I start a new sheet and on all the old sheets.    Thanks,