Search the Community

Showing results for tags 'String'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 17 results

  1. Hello everyone! Is there possibility to read words e.g. Name of alarm from the csv file or another file and save it in the PLC memory for further processing? It would be the best if the solution will matches to FX5 and IQ-R/F but it can be also for any of them. Thanks for help :)
  2. Hey everyone first post on here, does anyone know if it is possible to convert a string into a double integer. i am working with a dimensioner and it is sending me its box dimensions in a 12 char string (see attached picture). however i need this data as a double integer (it seems to just take the string length not the string value i have tried both dim_lengh and dim_length.data[0]). i have gotten it down to the point where i have the string split up into the dimensions i need but i dont know how to do the conversion. (box dims for reference are 21 X 15 X 14.8) Thanks in advance, Dr. Brule  
  3. I am playing with sending ASCII string commands back and forth between my CP1H and another device. I learned first how to do it using ladder and now that I'm getting into more advanced stuff (parsing, searching for certain chars, converting to INT, ect) I want to do it in Structured Text because the ladder for this gets hard to follow. My very first experiment (count string length) throws an error at me: It apparent takes exception that I've use the "STRING" data type   But it this works just fine in ladder:   So am I really not allowed to use STRING data type in ST on CP1H or am I doing something wrong?
  4. Hello All, I am using Wonderware InTouch 10.0 on Windows 7. It's slightly outdated, but its what we have. I am currently writing a script using the StartApp command to open a particular PDF file with the touch of a button. My script looks like StartApp("C:\Program Files (x86)\Adobe\Acrobat Reader DC\Reader\AcroRd32 C:\1.pdf"); The first part of the command runs adobe and the second part of the command opens the particular file "1". What I need to figure out is, how do I insert a variable into a string. For example I have 55 files I may potentially need to open up, all named 1-55. So I need the file I am calling to be a variable inside of the string so I can call it inside of a loop. I do not want to copy and paste this code 55 times, I want to make the file name a variable (tagname that is a memory real between 1 and 55) so I can run it in a loop. I have only been using Wonderware for a month or so now, so If anything is confusing feel free to ask. Thanks!
  5. RSLOGIX 500 String

    Hi, I am trying to enter a new line in a string. For example " Line 1                           Line 2"   Can this be done in rslogix 500 ?   Thanks
  6. CP1E RS232 Setup

    Hi everyone, I am fairly new here, I have a CP1E-N40DR-A And i need to send a string of data to a printer over rs232 from the built in port on the PLC, I have had a look online and canot find any information on what I need to do. all the tutorials are for CJ2 cpus ect and the instructions that I would normally use on a CJ2 dont work on CP1E PLC's. Any help or light shed would be great,  Thanks in advance
  7. ASCII Code 8 Byte In Twido

    Hey Guys!!!! I'm trying to use ASCII 8 bites in TWIDO PLC and on MOD BUS TCPIP it connected to WinCC , where I'm trying to read the ASCII in as a STRING char that to in 8bits. The problem I'm facing is that it is getting swapped like if I'm writing VA in PLC then on SCADA it is showing AV. In WinCC there is no setting for word swapping. Therefore Kindly help me for this in plc end
  8. Hey Guys!!!! I'm trying to use ASCII 8 bites in TWIDO PLC and on MOD BUS TCPIP it connected to WinCC , where I'm trying to read the ASCII in as a STRING char that to in 8bits. The problem I'm facing is that it is getting swapped like if I'm writing VA in PLC then on SCADA it is showing AV. In WinCC there is no setting for word swapping. Therefore Kindly help me for this in plc end
  9. Hi, I have variable (named var1) with data type 'Word[Unsigned]/Bit String [16-bit]' with Array [0..7]. I want to put 16 variables with data type 'bit' in var1. Is there function for that? Also is it possible to put 16 variables (bit) like this: var1[0].0:=bit1; var1[0].1:=bit2 etc. I'm using GX Works 2 with CPU L02 Best Regards
  10. Hi, I have variable (named var1) with data type 'Word[Unsigned]/Bit String [16-bit]' with Array [0..7]. I want to put 16 variables with data type 'bit' in var1. Is there function for that? Also is it possible to put 16 variables (bit) like this: var1[0].0:=bit1; var1[0].1:=bit2 etc. I'm using GX Works 2 with CPU L02 Best Regards
  11. I am running a very large step based program on an NJ plc.  I have several status and alarm messages that I need to display on the screen during the auto cycle.  Right now I have set up unions in the PLC for the faults... but this is a very large program with a lot of possible faults.  I'm up to 9 16-bit array unions already.  It is just getting really cumbersome.   I would like to just write an INT to a data area for each fault and status message.  That way I can assign each step a 5 values to be used for faults and messages (ie: step one can use numbers 1-5, step 2 can use 6-10, etc) .  Then I want to have the NS display a message from the string table based on the value in the data area.  Is this possible?
  12. Hi, I'm trying to use a parameter pass a literal string (eg. "Tank Temperature") in a global object, but when it displays in the pop-up I'm passing it to, it shows up as all caps (eg. "TANK TEMPERATURE"). How do I fix this?  Thanks in advance PS. It's not showing up with quotation marks, I used the alt0160 to replace the spaces.  Is there something similar to fix the capitalization?
  13. I am needing some help developing a string, and setting up communications that will be interpreted by a printer. I have thus developed my string, setup my com ports on my 1766 micrologix and setup com ports on my schmidt styliner scribing printer with win7e. Essentially this is plc to computer running software for a printer. the software has been setup to the best of my knowledge. My problem is creating a string that will be recognized as start/stop transmission at the printer. I have never done ascii so I am unfamiliar with how to get the two components talking. This is a simple application that only requires writing a string to the printer, but i have tried all that i can without any luck.
  14. Hi, I am trying to convert a sting of data ( yyyy- mm-dd hh:mm:ss format )in to INT data type so that I push it in to my FIFO Stack and later on retrieve the INT data and convert in to string again for the HMI Display. I have attached a screen shot of the problem. Thanks in Advance!!! Satheesh
  15. Hello I am trying to read string from MicroLogix 1100. Can it be done? I tried to read it and I got an error. I attached the error. Thanks for reading this post :)
  16. string for omron CP1H

    Hi all, how to simulation string in ladder?how to seng string from laddr to visual basic, or the reverse? please help me friends
  17. String encoder

    I need to replace existing encoder with quadrature output which is failing. We need to have minimum measuring distance of 60 inches. The encoder installed by manufacturer is Temposonics R-series RHS0650UMSO1Q1AC10 The resolution can be lower than the current encoder, probably 500 counts/inch or higher would be OK. Do you have any product that can be used? I was thinking about string encoder but I am open to suggestions.