Search the Community

Showing results for tags 'OMRON MODBUS'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 707 results

  1. Hi I have encountered a problem with CX-integrator. I'm not able to open the program. The following message appears:  System error. Save the date and close the application.  (Error code 0035) I have tried to reinstall the entire CX-one packet.  Any ideas?  Regards MBD

  2. Serial communication with KINCO PLC

    Francisco1998 posted a topic in Other PLCs

    Hello to everyone. Nice to meet you all. I am programming a KINCO PLC model HP043-20DT using ladder on KINCO BUILDER. I need to establish a serial communication with my PC. The PLC has a RS485 port which I adapted it to USB to connect with my PC. The PLC allows, at least, two ways to establish serial communication: MODBUS or free-protocol. I've read the software manual and tried to reproduce the examples it provides using the instruction blocks for MODBUS (MBUSR and MBUSW) and free-protocol (XMT and RCV) communications. However, I could not receive the data on the PLC. I could effectively transmit data with XMT from the PLC to the PC and I could verify through a tool called Access Port. In relation to MODBUS, I am using a simulation tool called Multiway from OMRON, however, I get no response from the PLC. If any of you have some experience with this software or this device, I would like to ask you how could I solve the problem. Thank you for your attention. Kind regards.
  3. Hello, i am a novice when it comes to PLC programming so i was wondering if i could get some help designing a ladder circuit that allows me to control the speed of a motor connected to a VFD from my HMI. the components i am working with are as follows, NX1P2 omron PLC (with a few digital input & output cards), NA5-7 (V1) omron HMI, and a yaskawa GA500 VFD. Essentially i have a customer who would like to view and make adjustments the speed of a group of VFD's from their HMI located on the main control cabinet. I would like a little help designing the circuit within the controller (If at all possible) or maybe a bit of guidance as to the type of functions i can use to get the desired results.   any and all help is much appreciated, thanks
  4. Hi gents, I need to build up a communication between nx1p2 to another omron plc (any type with sql support). This is due to the fact that I have finaly to prepare the plc communication with the sql database, and nx1p2 doesnt support this.  Sorry, i know it's probably a noob question, but I'm a beginner. What type of technology i shoud use to make this connection between NX1P2 and another Omron PLC? Or might be some share some project?  

  5. IEEE-754 Floating Point

    Ramkumar posted a topic in Mitsubishi

    Hi, Is there a simple way to convert hex value of IEEE 754 to real value in gx works 3 Regards, Ramkumar  
  6. hi everyone, I'm using 3g3mx2-a4022-v1 inverter, and to control the inverter, I decided to use the 3-wire input function & control the inverter from touch screen nb7w-tw01b, connected to cp2e-n60dr-a. now i already followed the manual on how to set it up. however, the inverter didn't run as expected. have i missing any step in setting up the 3-wire input function? currently i've set the c001 => 20, c002 => 21, c003 => 22, a002 => 01. is there any setting that i've missed? thanks in advance 
  7. Hi there I was reading this thread: And trying to create 3 axes. 1 virtual axis and 2 real axis, I would like to use MC_GearIn for each real axes so both real ones follow  the virtual axis (so both can move in sync motion). But my question is: If I give Move cmd(Absolute or relative)to master virtual axis and since it's virtual, it is not going to move then how can the other real ones follow the master(assuming that it's literally electronic gearing).  Any help will be appreciated!
  8. Hi. I have been up, down left and right in sysmac looking for the safety cpu's to add. If i open a project that has these devices, "Safety CPU device" shows in their toolbox window, while my project that does not have any safety added (trying to), does not have the "Safety CPU device" in toolbox. Any idea how to get it to show up so i can add the SCPU?  
  9. Hello everyone I'm trying to measure the size of an object 20mm long with an error of +-0.05mm. then which camera of omron should i choose and how to calibrate it to get the most accurate measurement. What is the formula for calculating the measurement error of the camera? Thanks

  10. robot omron i4

    vangiong posted a topic in Other Omron Software

    hi everyone i am wanting to connect PLC to I4L via tcp/ip. However, the documentation was not found. If someone has already done it please guide me.
  11. Hi there This attached pic I got from Omron motion control manual. I am trying to wrap my head around it. Does it mean that the slave servo axis is gonna follow master encoder axis using GearIn FB?? If so, then Can we executive Move FB on encoder axis? Looking forward to your responses.  
  12. Hi all:   Hope somebody will help me with the below error encounter on the NA. I mapped a external device (NJ PLC) variable (which is a structure) to a NA Global variable and the structure is automatically created in the NA data type as expected. I then create a new NA global variable and defined its data type as the auto created structure. However i observe the created new NA global variable is highlighted with an error "a data type cannot be used by both mapped and unmapped variable ....." ( pls refer to the attached screen).  I have found and view on the Youtube this video :"Introduction To The NA DataTypes" (link: https://www.youtube.com/watch?v=VZxWnVn1CSY). that clearly show the "imported" structure can be used for unmapped NA global variable even there is some variable already mapped to external device variable (starting from the 3:50minutes mark of the video). In my NA program i would need to create such unmapped variable for my logic use. Also i observe that i was unable to delete the auto created structure from the NA Data Types even after i deleted all variables that are defined with that specific structure. How can i delete such auto created structure in case i want to clear off some of those unused data types. I am using Sysmac Studio version 1.30.0.17. The HMI Device created is the NA5-9W00 (version 1.11)          

  13. Remote Omron and Yaskawa control

    sasha posted a topic in Omron

    Information : On the websites - https://abrysshost.web.app (and https://abrysshost .firebaseapp.com ) detailed information about the construction of remote diagnostics and control (Iot) systems for control systems of objects based on OMRON and Yaskawa controllers. The information is presented in Russian and English.
  14. Hi everyone, I'm new here. Thank you all in advance for the help you can give me. I have one machine with PLC Omron NJ101-9000, and this is Server in the Modbus communication. In the attachments, you can find the function block I used to communicate with 1 client. This work OK and I don't have problems, but I need to communicate with 2 clients at the same time. This block only admits one connection at a time. How I can connect 2 at a time? If I create 2 of these blocks, does each client need to connect to a different port? Do I need "open" this port in PLC configuration?   Thanks!
  15. Here is a step by step tutorial... Utilizing the CX Server DDE Manager will allow us to provide a link to the information in the Omron PLC. This link can be placed on an Excel spreadsheet. Charts, graphs, etc. can be made from the data. We will create links on an excel spread sheet from a CQM1H and a CP1L PLC. The information will then be displayed as a bar graph comparing the first ten memory areas. Here is a step by step tutorial... Watch on YouTube : Implementing the Omron CX Server DDE and Excel Let me know what you think. Regards, Garry

  16. Mobus RTU through NZ2FT-c24

    ASE posted a topic in Mitsubishi

    Hardware IQ-F connected via Modbus TCP on the NZ2FT-MT works Fine with normal IO. Now i want to run the NZ2FT-C24 with an modbus RTU protocol, i'm planning to make this. Anyone having an example for the NZ2FT-C24, what can help me?

  17. Mobus RTU through NZ2FT-c24

    ASE posted a topic in Mitsubishi

    Hardware IQ-F connected via Modbus TCP on the NZ2FT-MT works Fine with normal IO. Now i want to run the NZ2FT-C24 with an modbus RTU protocol, i'm planning to make this. Anyone having an example for the NZ2FT-C24, what can help me?
  18. Hi. I have this project where we read out data from temp sensors and vaccuum stuff. We use Pfeiffer vaccum cpt 200 for the vaccuum, and we create a frame to send to the modbus unit to pull a value from example '306'. With all the current items we pull data, all the values are only updated every 5 seconds, is there a way to perhaps pull several frame/addresses in one request per device? Current codes we read, some are in sequence of each others, but more has a bit of gap like 00, 02, 306, 307, 398, 330 and so on.    

  19. C# - Compolet missing

    Stefan009 posted a topic in Other Omron Software

    Hi.  I have the CD with SYSMAC Gateway Runtime V1.6 and installed the full CD. I still cannot add a reference to Omron.Compolet in Visual Studio 2019. And the project i am trying to open, complains about OMRON.Compolet is missing. Any idea whats missing to get the OMRON.Compolet to show up in VS.Net 2019?
  20. I am trying to create a simple `Hello World` Modbus TCP/IP program using Twincat3 and virtual PLC (PLC running locally on my computer).   I have set up a LabVIEW Modbus TCP/IP master + slave program (both of which are working see screenshots below).  I can send data between LabVIEW's master and slave programs. And also read the data from Python script (so I know for sure they are all working).  Now I have tried to create a Twincat3 program to set some registers using Beckhoff example What I have tried:  - I have tried changing the ipAddr parameter to: 'localhost', '192.168.88.1', '192.168.88.126'  - Also I have tried the nUnitID set to: 0, 1, 16#FF (16#FF as specified by Beckhoff docs) This is my Beckhoff code:     PROGRAM MAIN     VAR         ipAddr         : STRING(15) := '192.168.88.1'; //Tried also 192.168.88.126 and 192.168.88.1 'localhost'         M0 AT %MB0     : ARRAY [0..3] OF WORD;         nValue         : ARRAY [0..3] OF WORD;         fbWriteRegs : FB_MBWriteRegs;         bWriteRegs     : BOOL;     END_VAR           IF NOT bWriteRegs THEN         nValue[0]                := nValue[0]+1;         nValue[1]                := nValue[1]+1;         nValue[2]                := nValue[2]+1;         nValue[3]                := nValue[3]+1;                  bWriteRegs                 := TRUE;                  fbWriteRegs.sIPAddr     := ipAddr;         fbWriteRegs.nTCPPort     := 502;         fbWriteRegs.nUnitID        := 16#FF;             //Tried setting this to 0,1 and it also and didnt work ...         fbWriteRegs.nQuantity     := 4;         fbWriteRegs.nMBAddr     := 16#3000;         //Tried: 16#3000, 0, 1         fbWriteRegs.cbLength     := SIZEOF(nValue);         fbWriteRegs.pSrcAddr     := ADR(nValue);         fbWriteRegs.tTimeout     := T#5S;         fbWriteRegs                (bExecute:=TRUE);     ELSE                  IF NOT fbWriteRegs.bBUSY THEN             bWriteRegs             :=FALSE;             fbWriteRegs            (bExecute:=FALSE);         END_IF                  fbWriteRegs                (bExecute:=FALSE);     END_IF  What should I change in my code in order to make this example work? Thank you in advance for any support!   Info about LabVIEW programs:  I am using the Modbus TCP Master / Slave examples  The IP address is set to localhost and the port to 502 (which should match the IP address in my Beckhoff code)  I am 100% sure it works because I have also tried connecting to this program via Python script. Picture of my LabVIEW programs:
  21. Hello, I am using Easymodbus library to Communicate with Modicon TM218 PLC. Reading and Writing of Holding Registers working fine. But coming to writing of single bit in data register i am facing Problem. Need to know how we find coil address of a data register. e.g I have to write bit 1 to MW70.1 address. How we do that. Right now i am reading complete MW70 Register and Manipulating it using bit manipulation techniques and again Writing using Write single Register Function. It's working but some times because of reading problem it writes some garbage values. At that time complete system effecting.    Please provide me any solution. Thanks in Advance. 
  22. Hello every one in this video, you will learn about AccumulationTimer in Omron Sysmac Studio. The AccumulationTimer instruction accumulates time during which the timer input In is TRUE. The time is set in nanoseconds. If reset Reset is FALSE, the timer starts when In changes to TRUE. Total time ET is incremented as time elapses. The timer stops when In changes to FALSE. The value of ET is held.  https://www.youtube.com/watch?v=KSSmApnKHR0  
  23. Dear All, At the moment, I have project with PLC Delta and HMI Proface. I design HMI GP2500 by GP-PRO/PBIII ( V7.0). I see in List Device PLC of Software  not support PLC Delta.  Can you tell me how do you connect or Software HMI Proface ( Gp2500) support PLC Delta ? Thanks you very much.
  24. Dear all. I have the issued with Sysmac Studio 1.30. it can not show the Library setting and Library create. just show the reference only. can you pls help me this issued. Many thanks.
  25. Hello Everyone, I am writing one logic and need some help regarding that logic.   CURRENT LOGIC -  -There are two timers TON_1 and TON_2. -TON_1 timer will start as soon as PLC turns on. -After the done bit of TON_1 timer, the TON_2 timer goes on. -After the done bit of TON_2 timer, again the TON_1 timer will start. -This logic cycle will run continuously, both timers will run turn by turn. Code (Codesys/Schneider Eco Structure Machine Expert)- PROGRAM POU_1 VAR      TON_1: TON;     TON_2: TON; END_VAR TON_1(IN:=(NOT(TON_2.Q)) , PT:= T#100S); TON_2(IN:=(TON_1.Q) AND (NOT(TON_2.Q)) , PT:= T#20S);   Actual Requirement -  -There is a BOOL tag. -If the BOOL tag gets high during the TON_1 running, the logic should move to the TON_2 immediately. -If the BOOL tag does not get high during the TON_1 running, the logic should move to the TON_2 after completion of TON_1. -after the completion of TON_2, again restart TON_1. -Logic Runs continuously in a cyclic mode.   Give me your valuable idea to fulfill the logic requirement.