Search the Community

Showing results for tags 'Cx Programmer'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 52 results

  1. All, I am looking to hire either a full time PLC programmer or contract programmer that will develop systems in Ignition.  Experience with Ignition is preferred, but if you have other experience that is related, that is also acceptable. Python scripting is prevalent throughout Ignition, so that experience is required.   PLC knowledge is required. ERP system knowledge would be a major plus, as well as how to connect Ignition to it. All are SQL based.  
  2. On-Off Temperature control

    Hi, i'm actually working on a project with a CPU33 CJ2M and a external analog output CJ1W-AD04U I'm trying to read the informations coming from a PT100 sensor and control a valve which act on the temperature. i'm kind of lost in this project because it's my "first time" with Omron ! Which function block must i use or how must i program this would you show me example ?  Thank you for the help guys.
  3. CJ2M-CPU32 and CJ1W-TC002 help

    Hi everyone. l have a project with omron plc but l dont know omron. l have CJ2M-CPU32 and CJ1W-TC002 also input and output units. do you have a example temperature control programme for this device ? 
  4. Hi   I'm all new to using omron but "stuck" with a project. I find the CX Programmer software (version 9.35) a bit confusing. Used Siemens a lot.  What I'm trying to do is to display date and time on a HMI showing cpu startup time. I use a "First cycle flag" that triggers once when CPU starts and then I understand that the date and timestamp is in the system variables A352 and A353. But how do I format them as a normal text? I only manage to display them as #hex-numbers. I have tried googeling but have not found an answer to my questions. edit: CPU type is: CJ1M CPU12 //Morten
  5. Hi everyone, now i am doing a project related to communication between c++ and Omron PLC CP1E. Anyone have a way to connect the cx programmer and visual studio c++? Thank.
  6. Hello, attached below is what i have attached above is what i have done so far for the ladder logic when controlling a pump stroke but i cant seem to get it to work  Im using an OMRON CP1LE-EL with CX programmer i use an analog extension board and its only capable for 1 analog device which is my pump  is there something wrong with my ladder logic? pls help    sorry if its lacking in information i'm new to this so just go ahead and ask me what u need to help me out           
  7. Hi dear , may anyone can help me.. My Computer has broken so all my software include cx programmer and Designer has been disappear. Where i can get free software CX One for free , thank a lot .. Best Regard
  8. where are the FB libraries

    Hello, Im looking for the in built function blocks, but i cannot find it in the program files/ omron folder where the manual says (even with search for *.cxf), perhaps i dont have it installed, but where can i get them from? As i remember i downloaded cx-one from the official omron web page after login etc, so thats why i dont understand why am i missing the fb libraries What else place there is to find useful FB-s? Thanks!
  9. Hi! I have this CQM1 CPU21 plc running but the problem is that I'm not able to communicate using CX Programmer V9.5. Under the "Backup PLC" section, the drop down list for the specified PLC is not included. Is there any update/software to be use in order to communicate the PLC? I have "USB to RS232 Cable" that I have been using for different PLC, I also have this OMRON CQM1-CIF02 Interface Unit that is not also working upon communicating the PLC. I'm thinking that the software itself has a problem or needs an update. I hope someone can help. Newbie here in OMRON PLC. Thanks!!!   Marky 
  10. Hello, We have a machine from Taiwan that we are troubleshooting.  I pulled the program with comments, from the PLC.  It looks like they used a combination of English and i'm assuming Chinese.  The problem is that the Chinese is not displaying correctly.  It displays as symbols like @, ©, and other keyboard symbols. I was wondering if anybody knows what I have to do to display the comments correctly?  Do I have to install a CX-ONE Chinese language pack or a Windows language pack?  If I need a language pack, where can I get it and will I easily be able to go back to English when I'm done?  I've emailed OMRON but it seems that they are very slow with their support.   Thank you for any help in advance.
  11.  Hi, im from brazil and need some help, some days ago i buy a programmer CQM1-PRO01-E beacause one plc CPM2B are deceased, we have another equipaments with this one, but CX programmer not response and de are trying day after day, but with this programmer i want copy and paste the logic from other PLC. Can you help with copy and paste on programmer CQM1?
  12. OMRON PLC MEMORY AREAS

    Hello guys, I have gotten to a level where I can do a few things with an OMRON PLC. However, there's something that is supposed to be basic by now but I still don't understand it, and I will appreciate your help on this . What is the difference between the D, W and H memory areas of the PLC? And in what instances do I utilise each of them for storage of my data? Thank you.  
  13. how to connect cj2m + ns8

    Hello, I would like to make single ethernet connection with a cj2m cpu31 and an ns8 screen. What exact setting are need to set at the cpu and at the screen project? Is there some kind of quick guide which shows where to click etc? I dont want to read 700 pages and didnt found a proper manual, maybe you know a good one? Thanks in advance!
  14. Hello! Is it possible to run a program only 1 time when i turn on the plc? In siemens it was ob 100 or soemthing like that, that program only runs one cycle at startup of plc. I want to make sure some bits are off at startup to be in safe position Thank you for your help!.
  15. Pt100 only measure

    Hello, I have a cj2 plc, and i would like to use two pt100 to measure, and just show the results on an hmi screen. I started to look at the  Cat. No. W396-E1-03 SYSMAC CJ Series CJ1W-TC@@@ Temperature Control Units manual,  but i don`t understand fully, that is these card are only for temperature controls? What is the easiest way to have the readings? it doesn't need to be the cheapest solution. And especially how is the programming works? Is there a special unit are i read about but how is the adressing works? Im completely new to omron (i know siemens) so any linked guides are welcome!
  16. Omron CJ2M encoder reading

    Good day  I have a CJ2M cpu with ID211 module I have 2 E6B2-CWZ6C encoders connected to inputs 6,7,8,9 the plc data trace shows that pulses are being read, but I`m trying to configure PRV 881 instruction but it doesn`t work   please find attached the images   Best Regards   Eduardo   encoder error.pdf
  17. Hello, My quest is to make a memory card, which I can just put into my PLC on the field and load all program and options etc to my plc. Now i found the official omron guide about it but its not good at all... For example is does not explain that how i need to transfer the H and D memory part to the plc, and that not all network settings are being copied if im not careful.   But my question is: is it possible to make this backup memory card without having the actual plc? Because the process is done in memory card window, which is only available if you are online. So basicly i have to get all the plc rack parts to make this work? I tried with the simulator but ofc it is not working.   Someone mentioned me that it is possible he heard from someone but no one actually knows how to. And there is nothing in the omron manual as i see.
  18. KEEP madness

    hello guys, When i simulate the programme,using CJ1M CPU21, and i set contact 200.01 and 0.01 on, the KEEP doesn't change the bit of adress 200.01 to 1. The same thing happens to the KEEP below. Can you give us a reason for this problem and show us the way.   Best reggards,   yolo.cxp
  19. hey!  I'm pretty new to PLC's, and I'm supposed to ''teach'' the people at my internship how this PLC works, but I have encountered a problem.  I've gotten pretty far with all the digital programming and understanding how everything works, but I just can't figure out how the analog inputs/outputs and programming works...... I've had a fair explaination on PID and how this works. I've searched the web as well to figure out what PLC instructions to use.    I hope you can answer my following questions.    1, what are the most used PLC instruction blocks which I can use for temperature control, and how am I supposed to use them? 2, Could you please give me an example on how to use PID and what numbers will I need for the calculations? 3, what are the most used PLC Instruction blocks (apart form the analog ones) that I should include in my tutorial?   this is my setup: Ethernet switch MOXA EDS-205 Plc voeding PA202 PLC CPU CJ1MCPU11-ETN Digital IN (16x) CJ1W-ID211 (SL) Digital IN (16x) CJ1W-ID211 (SL) Analog IN (8x) CJ1W-AD081 (SL) Analog IN (8x) CJ1W-AD081 (SL) TRANS OUT (16x) CJ1W-OD212 (SL) TRANS OUT (16x) CJ1W-OD212 (SL) Analog OUT (4x) CJ1W-DA041 (SL)   thank you soo much for looking at my question and considering helping me! the OMRON helpdesk hasn't been very helpfull.    kind regards,    Deuslupos,
  20. NQ Design and CX-Programmer

    Hello! My name is Gabriela. First, I do not speak very good English. I have to do a project! I have a HMI (NQ3- TQ000B) to OMRON for a teaching platform. I installed NQ Designer for it. I did the program in CX-Programmer . But I have a misunderstanding. How can I connect the CX with NQ . How can I assign internal bits set from CX-Programmer in buttons from NQ-Designer? In the end, I would like that after I connected bits with buttons and I transferred the program to HMI, when I push the button on the HMI interface, the platform to do what I programmed in cx.
  21. DC motor with encoder

    Hello, The company that I work for wanted me to design and build a FIFO loader. For those who do not know what a FIFO loader is, it's basically a lift that runs up and down and filling up the magazine slots with pcb's. After I finish the mechanical part i'll try to program it by using a CPM2C - 20. I have already played with CX-programmer and learned my self a bit, for example how to program simple things such as AND and OR gates for controlling motors and lights. Really hard part for me was figuring out how to create a program that reads data from the encoder and use it to create positions which the motor will stop at, and i have not yet figured it out. I've been trying to google it without any luck, the only thing of real info i've got is a 650 page long pdf file or CX-Programmer manual which is hard for me to read since i'm new to all of this. Would be great if any of you people got any source or maybe a manual which are easy to understand for new beginner like myself. A bit about the program i would like to make: The FIFO loader will have some buttons for selecting different programs, lets say you press first button to select "program 1". Then the machine should move up and stop at posision "50" (there are 50 slots on PCB magazine) after it gets signal from pneumatic actuator (which will be used to shove pcb inside the slot) its should move to position "49" and so on.. If FIFO loader is located at "home" position and you press second button to choose "program 2", then it will move to slot "49", wait until it gets loaded, and continue to slot "47" and so on.. The meaning of this is to make a loader which can select a program to fit pcb's with different size of components.
  22. Well established manufacturing company is looking for a PLC Programmer to join its team. The company builds, maintains, and repairs all of its production machinery at their plant in Culver City...very hands-on opportunity. Ideal candidate will have PLC programming experience associated with custom-built automated equipment. Must be authorized to work in the US (US Citizen or Permanent Resident). Responsibilities Troubleshoot and maintain PLC programs and control systems of custom-built automated production machinery. Replace and upgrade old PLC's and control systems. Design and program PLC based control systems of new machines. Requirements AA, BS, or Trade School degree in Electrical Engineering or equivalent preferred. Minimum 3 years experience in electrical engineering and industrial automation systems design and PLC programming associated with equipment/machinery. PLC programming experience with any of the following PLCs: Automation Direct, Festo, Allen-Bradley strongly desired. Experience troubleshooting machine control circuitry, motor controls, servo drives and associated systems, pneumatics and hydraulics. Location: Los Angeles (local candidates preferred) Salary: up to $80,000 + employee benefits including medical, dental, vision, and 401k.
  23. Salutations! So recently I'm very confused with my CX-Programmer. Everytime I tried to run the Simulator from CX-Programmer, I always got a notice that a certain program called KickEngine.exe is about to Run. I look up for this program and found it inside CX-Simulator folder, so I decide to run it anyway. The problem is the simulator always return the error : "The selected port does not exist". In other words I cannot run the simulation. I understand that the simulator uses ControllerLink comm. between CX-Programmer and CX-Simulator, so I tried to run those two separately and build the connection, but also to no avail. Even so, since CX-Programmer 9.0, I believe there is no need to run the programs separately. Before I had a similar problem where the simulator cannot be run, and the error code is "Failed to Start Ladder Engine". This was solved by removing whole Omron software using CX-Remover, then reinstalling again. However, it doesn't solve the current problem. If possible I don't want to resort to reinstalling the whole OS... T_T Anyone has suggestions or ideas? I had lookup on an older thread and tested the measure taken there, and didn't solve this. Thanks!  
  24. Working with arrays

    Hi! I can not understend how to work with array from functional blocks. For example, I want to create some functional block (on ST lang.), send to it some array and recive from it some new array (FB make some monipulations with input array). FB code: FOR i:=0 TO 4 DOinputLoadArray:= outputLoadArray*2;END_FOR; How does look my main program (only on ST language) for send input and recive output arrays?
  25. Hi everyone, Im quite new into OPCs, I'm using adam 4015 6channel RTD module to measure temperatures and then connected to adam 4520, I would like to know how to connect the adam modules to cx designer (or if have to make any program in cx programmer) as i want to have a GUI of the temperature measurement. Thanks in advance