Search the Community

Showing results for tags 'Creating Multiple files'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 12 results

  1. WRITE MULTIPLE REGISTER MODBUS

    Hallo my name is Danu, i have a CP1E wirh CP1W-CIF11 and connect to modbus RTU device, i have done with write single coil, write single register,  read single register and read multiple register. But i try to write multiple register,  the indicator of CP1W-CIF11 is off and if i check d memory its no data. I attached my cx programmer. Can you help me create write multiple register in cx programmer?  Thank you AD4402-modbus edit edit edit edit edit.cxp
  2. I need to add 3 encoders to my project. Currently my PLC Inputs are full. I am using high speed counters 0.00 and 0.001 to monitor a motor RPM with an encoder. I now wish to add 3 encoders to monitor position of (3) other linear axis controlled by stand alone (Zeta 6104) stepper drives. I have 3 open outputs on this PLC but all inputs are used. What are my hardware options to add additional encoders to allow me to track and correct the 3 additional axis. My first thought was to add another CP1L and use PLC1 0.00, 001 for ENC1, PLC1 0.002, 0.003 for ENC2, PLC2 0.00, 001 for ENC3, PLC2 0.002, 0.003 for ENC4. I thought this would allow me to use additional I/O from the second PLC but I am not sure if this is even possible. Is it possible to connect 2 PLCs this way? I will need additional I/O to send to these stepper drives to make the corrections. Do I need to add an expansion unit to the existing PLC and 2 additional high speed counter modules? The encoders are all Omron E6C2-CWZ6C. I would appreciate any advise on options to add these encoders and help point me in the right direction. Thanks in advance to any help.
  3. While creating some pages yesterday for the NA HMI, using Studio V1.17, I went to look for "images" to make some cool buttons.  Looking in Properties/Design/Image ..  some research told me I'll need to look for a file on this path: C:\Program Files\OMRON\CX-One\CX-Designer\intaparts\BMPfiles\ problem was... I didn't have CX-One ... or any BMP files (related to Omron) So, the question is.. Did Sysmac Studio ever get around to providing such "Image files" for HMI objects?   If so, can they be downloaded without having to purchase CX-One?    Thanks, Regards, Michael
  4. Hi all I am setting up a batch tank system, I have 1 pump which can pump to six different tanks(via pneumatic actuated valves). This is my first go with a HMI, usually I would use a multiple position switch. Is it possible to make a six position selector switch with a HMI? I am using a AB Panel-View 800, has anyone done this before? Any help would be appreciated.
  5. Creating Animation CX Designer

    hello everyone, l am beginner at cx-designer. l need to learn how to create animation in cx-designer. İs there any document for this. thank you.
  6. Hi, Is there any setup to manage alarms in one PLC from multiple CX-Supervisor runtimes running on different computers? If I get an alarm, it shows up on both runtimes. If I acknowledge from one runtime, I also want it to be gone from the list in the other runtimes.
  7. Hi everyone. I'm new at Mitsubishi Q series. I can make a connection between PC and PLC through ethernet and read/write from/to registers. When I try to connect second PC to PLC I can't do it and get error. How can I set Network parameters of QJ71E71 module to communicate multiple PCs to PLC? Thanks.
  8. how upload files where can i view the files to uplaod
  9. Hi all, I have been trying to emulate an exisiting logix5000 project but am struggling somewhat. All the online help I have found so far is just showing me how to set up emulator with a new project. I.e. set up the controller from scratch. What I need to do, is take a project code from an exisiting process, make my changes and then test on the emulator. I did it once but as soon as I downloaded the project to the emulator controller I got near on 900 errors as the code couldn't resolve the I/O. If anyone knows of a technote that advises on existing code emulation that would be great. Just to be brave, I actually want to set up multiple emulators and have a couple of codes running at the same time so I can test SCADA I/O, is this possible? Cheers for now Alex
  10. Addition of more than 2 values

    I'm new to the Allen Bradley software and I'm trying to add 3 values together. I have found the addition block but it only allows for 2 values. Is there a way to extend the block or do I need to use the block twice? Thanks for your help
  11. FactoryTalk ME Parameters

    Hello all, we have many large projects with multiple screens and are using popups quite frequently. As a result, our parameter file list becomes quite long. I have excel sheets to import my alarm table, and my local HMI tags, but have found no simple way to create/import multiple parameter files. Has anyone found a way? AB tells me that I can use Notepad to create 1 file at a time and import it that way....where is the time savings in that? As an example, I will probably end up with well over 450 parameter files by the end of this project.....hand entering each one....carpal tunnel syndrome here I come Thank you PS..if anyone wants the alarm table import tool msg me.