Search the Community

Showing results for tags 'Connection Failed'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 55 results

  1. Good Evening, using the Ethernet Built-in LAN I need to program 4 power supply. I'm tryng to program the firstone but even if I can send the correct command to the power supply I always recive a 2006 error on SKTTCPRCP function Is there someone that can help me in order to not receive the 2006 error code? Have I to respect a procedure? It seems that at the second connection time the socket remain closed. Thank you!
  2. So I need to find a way for a Mitsubishi PLC to communicate with a PC - ideally sending a binary number through ethernet to a PC program that reads it and tells the PC which files to open. I think I can create the PC program with C++ or Visual Basic without too much struggle. But I am unsure of how to get that binary ID from the PLC and into the PC program. I have done a little bit of research on MX Component and MX Sheet, and also MC Protocol but all seem a bit outdated and/or just over my head and I need some better explanation - I'm pretty new to PLC and programming. I feel like it shouldn't be terribly difficult to get 1 external binary number into a PC program. I'm sure someone has done essentially the same transfer and I just want some ideas. -What kind of connection support do I need to transfer data (Likely just a D-bit) from a PLC to PC? -How would that/those bit(s) be accessed in Visual Basic or C++? I'm assuming some type of library function that will call the value
  3. Hello all, hoping for some help with an issue we currently have. We have a stationary unit provided by an automation company which is controlled by an Omron CP1E PLC unit. We have just purchased and installed the latest CX-One software with key etc as we are aiming to make modifications to the machine. When connected to the PLC via USB the drivers install however we get an error message when viewing the driver properties stating windows is unable to verify the digital signatures. When attempting to connect via USB direct online we get a failed to connect to PLC error.  We have tried updating the drivers but it states the most up to date drivers are installed. Also tried uninstalling and reinstalling drivers. Anyone able to offer any advice? We have no experience with Omron so unsure if there is something we are missing. Thanks!
  4. Is there any way of viewing a remote Proface GP or LT screen inside a second GP or LT screen? I want to do this to avoid creating and loading duplicate screens. Essentially it would be like using GP Viewer-EX where the PC is replaced with another GP or LT unit.
  5. I have a cpu33 that I had issues with a bad battery and it loaded from memory card.  The version on the card was old so I decided to download the latest version from 2 days ago to it.  When I did, I lost communication through ethernet.   Can't connect through usb either.   The thing that baffles me is that I can ping the plc at the address and I get a reply.   Any help/suggestions would be greatly appreciated as I am not familiar with omron plc's at all.  Also on the display it cycles through Er HE 1P 07.
  6. PC-PLC CP1E - USB-to-SERIAL cable

    Hi,   I have a self-bought usb-serial cable converter for CP1E. Currently can't connect to my PLC using PC. CX-One says "Failed to the PLC". I am supposedly to use "SYSMAC WAY" as my Network Type in PLC settings?   EDIT: The CPU type is N30   I've checked the following settings: 1) COM number is correct ( as checked from windows Device Manager side) 2) Cable driver is installed, there is no "unknown" driver in my windows Device Manager 3) My RS232C LED in PLC is not lighted up.   Any other suggestions to check settings ive missed out would help, other than buying a new cable for the moment.   Regards, Summerstone
  7. Hi, I have some trouble with a CJ2M-CPU33. My client did a backup to memory card earlier today, and after this we did some changes through remote link. Now the client wanted to restore the previous backup to the PLC and has done so, but the system would not function correctly. After going online on the PLC it seems like the PLC is stuck in "Stop/Programming Mode". When trying to change to "Monitor" or "Run" mode a dialog comes up containing the following message: "Failed to change the operating mode. The operating mode may be still changing in the PLC."  - All the dip switches are set to off after restoring backup - The PLC has been rebooted  - I have downloaded the application again through CX-programmer  - Verified that the PLC is set to start up in "Monitor mode" But nothing helps. The same message comes up when trying to change the operating mode.  Hoping anyone can help to resolve this issue as it is very critical for us and the client. In advance, thanks for any tips or help received. Best regards Stian
  8. I recently purchased the SIEMENS CONNECTION KIT (6ES6400-1PC00-0AA0) with its corresponding serial cable to connect to a MICROMASTER 440. I connect my RS232-USB cable to the serial cable. But I can not connect in any way! What do I do wrong? 1. In the micromaster 440 I put the following USS configuration parameters (USS = serial communication):    p2010 = 6    p2011 = 0    p2012 = 2    p2013 = 127 2. I put the DIP of the Connection Kit (Ref. 6ES6400-1PC00-0AA0)  1 ON, 2 OFF, as indicated in the manual.    I connect the connection kit module with its serial cable to my RS232-USB cable. And I connect the USB to my PC. 3. Open "Set PG / PC interface" and select PC COM-Port.USS.1 4. I go to the properties and I am selected COM1 without problems. 5. But I do the transmission speed test and can not find anything. 6. Also in the diagnosis of PC COM-Port.USS.1 I do the test and can not find anything. Supposedly my RS232 cable is correct (I have tried several tests). And the configuration of the COM port in "device manager" also looks correct. What am I doing wrong?? Zhanks!
  9. Hey guys,   I have worked on the FTView ME platform many of times.  I am now working on a FTView SE (Local Station) application, and I am having trouble connecting an Offline .ACD file to my program so that I can design.   If someone could help me with this it would be greatly appreciated.   Thanks in advance!
  10. Profibus Function Blocks for Q2ASCPU for Melsec ST Lite RIO inter-connection. Please assist in advising the attainment of such blocks - if any existing. Thanks
  11. Hi all, I will be starting on my MSc in automation in a couple of days so for that reason i have obtained a S7-1200 series 1211AC/DC/RLY PLC. This is a new area for me as i have been working in offshore since i graduated from my BSc a couple of years ago. I watched some Youtube tutorials on how the programming is done and i am ready to try it out for myself, but i have encountered a little problem.   Problem: I am using the X1 P1 PROFINET (LAN) port as a connection to my PC, this turns the Green Link light on and the Rx/Tx lights blinks orange. Now to the problem, i cannot connect to the PLC through the TIA portal, no matter what settings and connection types i use in the PG/PC interface box. I have had no luck finding leturature adressing how to configure the PC/software and get a connection to the PLC. Do any of you have a PDF or link which can help me through this problem?  Hardware: S7-1200 series 1211AC/DC/RLY 6ES7 211-BE40-0XB0 S C-J5PN 1614 2017 FS:05 Software: TIA Portal Version 13 STEP 7 Professional V13 WinCC Basic V13   Thanks   Best regards   Dennis    
  12. Hi all, I have a S7-1200 CPU 1214 DC DC DC and Cm 1241 6ES7241-1AH32-0XB0 communication module.I'm using TIA Portal 14 and i connected cpu but i couldn't connect cm 1241 communication module.When i looked diagnostic i saw" Diagnostics data are not available because the current online configuration data differ from the offline configuration data.".Then i looked for what was the difference.But i didn't see.Are there anyone can help me? Thank you
  13. Is CP1H with Ethernet option board (CP1W-CIF41) is capable to communicate More than one client? If yes what settings I need to be Done?  
  14. Dear all I am new please help me to find out how i can do electrical connection plus control of softstarter ATS48C48Q Schneider brand.I am using this softstarter for 200kw motor heavy duty.i need control this motor beacuse it is taking high torque at starting time.
  15. Good day  I require some assistance with the configuration setup (GX Works 3) for FX5u PLC inter-communication (PLC to PLC), over Ethernet (using the built-in Ethernet port). The purpose of the inter-connection is data exchange. (Values stored within the PLC storage registers such as words and bits).  Does anyone perhaps support files on this such as a procedure or example? Thanks
  16. In general, this control PLC program is written in GX Works. I did a simple visualization on TIA Portal v14 (WinCC RT Advanced) and I would like to now test it on Mitsubishi FX3U driver with ENET Module. I do not have much experience in this kind of thing, I'm still learning. I know that someone previously made a visualization in LabView and downloaded the tags from the PLC using NI OPC Server. Someone also did visualization in iFix and also downloaded tags through server opc. I do not know just how or what program to download tags in PLC so that I can no longer use it in visualization in TIA Portal. Unfortunately I still have a connection problem. The driver is connected to the router. From the connection options with RT Advanced I chose in the connections tab Mitsubishi and entered the appropriate IP. Still nothing. I do not know if the lack of a connection can be related to a virtual machine (VM Vare Workstation 12) on which I have TIA Portal installed. The driver pings but can not connect. I also tried using KEPServer EX to connect and unfortunately also failed. (I have information about the can not connect). Anyone know what program I should use? or had contact with such a problem? I attach a photo of communication from my station to more visualize the problem. Thanks  
  17. Hi, I was wondering if there is a way to limit the number of allowed on-line connections at a time to a PLC? Like can you somehow set in the PLC parameters that only 1 'connection' can be on-line in the device at a time? Thanks Edit: I'm referring to connections from the TIA portal - not HMI / ethernet connections and so forth
  18. TIA Portal v13 - GOT1000

    Hello! Is there a driver GOT1000 for tia portal v13. I would like to do scada for GOT1000 GT14 using the Tia Portal v13. There is a possibility at all?
  19. q04udeh&qj71c24n-r4

    Hello everyone. i use q04udeh cpu and     rs-485 qj71c24n-r4 communication module. I  try to receive information from external device(2000amp power supply). im not a professional plc guy. On that moment i get MSG_RECV_String[7],  and store them in separate buffer from K1B108 to K1B120. i skip one because i do not need that k4B100 , and start from k1B108. I want to show value Voltsx10, but i need some help to do it. when i change value i see numbers from each separate MOV block function, but i can not convert them to decimal.(or i do not know how to do it). When i try BIN command i have error message 4100. Thank you for any suggestions.    
  20. Dear, i am doing one project on Omron PLC with VB.net.  i am using Ethernet communication  with  VB to PLC but i am unable to show analog value on VB page please guide me how to get data of analog value in vb and show in VB.net for DI/DO i am using CIO &H0  forreading   and  &H1 for write but for analog value how i will show on VB.net.
  21. FX2N-4AD

    Dear Friends; Today i am stuck and do not understand how i fix the following issue? 1. We have PH controller from Hannah Model HI 8711T , PH transmitter HI 8614L and PH probe. On the terminal blocks of the controller there are  4-20mA (Isolated).  2. We have FX 2N-4AD analogue module to read the PH value on the HMI. 3. First i connect the 4-20 mA as follows Short the V+and I+ terminals and connected it to the -ve of the controller 4-20mA terminal. I- connect withe the -ve of 24 VDC. and +24 applied to the +ve of controller 4-20mA terminal. But the reading not read by the controller. Then i change the wiring as follows Short the V+and I+ terminals and connected it to the +ve of the controller 4-20mA terminal. I- terminal connected to the -ve of the controller 4-20 mA terminal. By this the reading is shown perfectly. But the issue is after 10 to 15 second all the values that is on the LCD of controller , transmitter and on HMI fluctuate. Even i connect and disconnet the shield on the Module side but the issue is not fixed. How i fix it, and guide me how i wire up properly FX2N-4AD with 4-20 mA isolated output of the controller?   Thanking you, I will remain 
  22. Hi guys, I have tried almost everything and ran out of option on how can I successfully connect modicon m34020 processor using mini USB with unity pro, I am working in Windows 10 and selected everything possibly correct I can, like setting address to USB, and "SYS" in Set parameters, I have USBplc driver installed and it shows, "disconnected" and local and remote id emptly fields. In my device manager, I can see a question mark on the processor driver "BMX CPU" and when I try to update/upgrade/fix it it simply goes to nothing. While the Unity Pro shows the error "this isn't the right address or the plc is too busy or off". Please advise, if i am missing something. thanks in advance.
  23. I am experiencing a serious problem. Everything went fine in my project for month. Yesterday when I "Transfer to Controller" (like I use to do several time a day) I got this Message : "Build is not complete. Process was aborted". So I build again, I Rebuild controler, I restart SysmacStudio, restart the computer, reset the hardware on the project ... nothing worked. Always the same message. So I opened a previous version of my code. Since it was allready built when saved, I had no problem transfering it in the controler. However, the moment I change a line (have to rebuild) on this backed up version... same problem appear. I finally got to the "output windows" (Alt+3) where I saw ALL build are failed. I've contacted my Omron representative and he is trying to help but he seem as lost as I am. Please help if you can, I am using Sysmac Studio 1.13 on Windows 10. I also have a HMI wired to the project and everything work fine with it.  
  24. Hi guys, I'm in the middle of a little university project, I'm attempting to implement a control system purely based on artificial intelligence. A neural network will be used to map the characteristics of a power plant. A fuzzy logic controller will be used instead of the conventional PID and finally a genetic algorithm will be used to tune the controller while the system is online. This is all simulated of course. Each of those AI's will be developed in Matlab. Only problem with that is, is it outputs the code in C or C++ (From memory). I would have to convert this to structured text (Based on Pascal). So to circumvent this problem I thought I would just directly interface matlab to the PLC (Schneiders M340).  My idea being, all the calculations are done in matlab which are then sent back to the PLC. However this presents me with a new problem of how I would be able to interface matlab to the PLC. If anyone has experience with this sort of connectivity, any advice would be greatly appreciated. Thank you in advance, Luchek
  25. Hi All I am new here without much experience of plcs. I have a PV 550 with DH485 coms port that I want to replace another PV550 with rs232 that communicated with an SLC 5/04. Is there some way to connect the two with a cable or protocol connector? Alternatively can you connect through the printer port on a PV600? CHeers   Azza