Search the Community

Showing results for tags 'CC-Link A-Series Parameters'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 145 results

  1. Hitachi H-702 Series MODE SIMULATION

    bolman885 posted a topic in Other PLCs

    Hey, does anyone know why the simulation mode is on? how to change it? (LED SIM )
  2. Hi, So I have a problem, that BootP DHCP server doesn't find my 1734 AENTR series B and so I can't assign IP address to it. Been trying many things. Any advice? I'm new to AB and I guess it may be a really easy thing but so far I didn't find a solution. 

  3. CP1H master - CP2E Slave NT-link

    Ralf posted a topic in Omron

    Hello, I currently have a PLC in a machine that is a CP1H. A newly developed machine uses a CP2E PLC. The newly developed machine is supposed to communicate with the CP1H where the CP2E is a slave. I am not able to find much documentation on this specific set-up. I was wondering how to set this up. As the shared words of each PLC are on different adresses. I can't really find any documentation or any examples on how to do this. Can somebody help me with where to start with this?   kind regards, Ralf

  4. Hitachi H-700 Series

    bolman885 posted a topic in Other PLCs

      Welcome, How to program this PLC?  
  5. Hello friends I have worked with other series of omron plc but this is the first time I am working with cqm1h cpu51 series. In a factory, 4 of these PLCs exchange data with each other with a clk21 card. After a problem with one of the CPUs and replacement, I was never able to download the datalink settings. I did all the steps in the manuals step by step but I did not succeed. In cx-net software, after selecting online, I selected the data link menu, but as you can see in the attached image, the setup button is never activated. Thanks for guiding me

  6. NE1A-SCUP02-EIP

    kckku posted a topic in Omron

    Does anyone have experience with the NE1A-SCUP02-EIP safety PLC? We had a machine shutdown yesterday with a L9n4 error on the NE1A unit. The manual says this is a tag data link error. Does this cause the safety PLC itself to shutdown? I always thought the EIP portion of the safety PLC was only used for status reporting to the PLC. The safety portion is strictly on DeviceNet and is independent of the EIP network.  The CJ2 PLC's error log tells me it had problems communicating with the safety PLC, the VFD, and NX I/O's which were all in the same panel going through an Ethernet switch. 
  7. I am new to automation systems and devices and I just want to know how to connect two HMI's (each one would control different things) to one PLC using Sysmac Studio and NB-Designer via Ethernet. The model of the PLC is NX1029020 and the HMI's are one NB10W-TW01B and an NB7W-TW01B. I searched for info about this topic online but I couldn't find anything that worked for me, I saw an article from OMRON where they connect two NB's to the CP series, but in my case, NB designer doesn't allow me to insert more than one HMI in the same project, I also found something similar on a youtube video that gave me an idea about how to connect multiple HMIs exporting the pks file and importing it to another HMI project but I still can´t figure out how to add both to my PLC. I would thank you a lot if you could help me with this because I know it's not a rare implementation, just I haven´t found the right way to do it. I also leave the links to the Omron article and the youtube video I found. https://www.myomron.com/index.php?action=kb&article=1554 https://www.youtube.com/watch?v=rXx5lut7G9I

  8. Q and iQ-R series

    tingxing posted a topic in Mitsubishi

      Hello,  I want to know, if it is worthwhile to transfer from Q series to iQ-R? Currently our equipment is using Q series, which ss a vacuum coating equipment with about 10 power instruments, 20 gas controllers, and pumps and so on. As for the analog and X, Y points, Q is quite capable.   I can not see any advantage to switch to iQ-R, but some people want to. So I want to know,       1. will Q be outdated in the near future?       2. will use iQ-R cost much more than Q? including peripheral units.       3. has iQ-R really been widely adopted?       4. thoug iQ-R may be powerful, I think use multiple middle size CPU's can be more advantageous,              is this right? Many thanks in advance. Ting    
  9. I have a huge confusion regarding the retentive timers on FX3GE. According to the programming manual for FX3G(image attached), all retentive timers use the EEPROM. This is very confusing to me because the retentive timers are modifying the measured time constantly in an EEPROM register and EEPROM type of memory is known to be write limited. After a couple of million write cycles the EEPROM registers burnout. I've experienced this myself by constantly using the T250 and after a while it became unusable. The timer stopped counting time after some time. This leads to my decision that retentive timers on FX3GE PLCs are something that should бе used only on rare occasions so as to avoid EEPROM memory burnout. If this is true than the real question comes in: What is an alternative for using retentive timers on FX3GE when you want to measure time between two events. The instruction TTMR for teaching timer is appropriate however this instruction does not exist on FX3G series.  

  10. StartApp Intouch Wonderware

    lepass7 posted a topic in HMI & SCADA

    Dears,  I would appreciate your help on the below matter.  I am trying to send email using intouch scada.  I am using the following command: StartApp "powershell.exe " + par0 + par1 + par2 + par3 + par4 + par5 + par6 + par7 + par8 + par9; par0 --> is the powershell script path par1 --> is the email par2 to par9 are some parameters i would like to send. I checked the power shell script and its working just fine, but when i run the script through intouch it seems that executes a part of the string.  For example: par0 = "PATH_ON_MY_PC/powershell.ps"; par1 = "test@test.com" par2 = " -par1 12"; par3 = " -par2 10"; par4 = " -par3 test"; ... par9 = " -par9 9";   I am only getting first parameter and if i change to this: StartApp "powershell.exe " + par0 + par1 + par3 + par2 + par4 + par5 + par6 + par7 + par8 + par9; I will only get third parameter.  How can I overcome this limitation?
  11. can i cc link  Fx3U-64CCL  with FX2-32CCL without any problem
  12. Hi All,  I am trying to limit the number of character for user to key in data edit . However, I put numbers inside it shows me invalid number of character. Anyone know how to solve it ? Note; My variable is in String Type   
  13. Hello, everyone I have to query a SICK distance sensor from an L26CPU via the onboard Ethernet interface. I have created a simple protocol which I start with the function block SP_ECPRTCL. Unfortunately it takes at least 25ms until the next telegram is started. The sensor responds within approx. 1.5ms. Does anyone know whether that works faster or is that a limitation when using the predefined protocols? Sensor manual:  OD5000, 8021391 (sick.com)  (Chapter 7.4) I am grateful for all the hints. Thanks and regards Dave SICK_Protocol.tpc Messaufbau_vTest.gxw
  14. I have an analog output card 1734-OE2V and there is in the fault/actions page parameters for program mode. What is program mode and when it is activated? Fault mode is clear but... Program should be written the value, but when this happens?
  15. Hello Mrplc's members I have a Korean version " goldsec Moj2" of Mitsubishi plc A0j2 I need to know the right software for it And how to get it I tried GX Developer but it didn't work because it have only A0J2h type And I tried melsec medoc (version 1.64) but it didn't have A series CPUs
  16. Hi, I have the following configuration where 4 PLC panels, with each having a Q12PH CPU and QJ71E71-100 module. All these QJ71E71-100 are connected to a HUB using straight cable. From the HUB one connection is going to an I-Fix SCADA which is already communicating with all 4 PLCs using MC protocol. I want to send data from 3 of this PLCs to the 4th PLC in the same network using fixed buffer communication. Can anyone provide a sample program for the same. Send and Receive side. I am using GX Works 2 for programming. Your help is very much appreciated.
  17. I do have a problem with Stratix 5700 managed switch. I have a system with 3 Stratix 5700 switches with their own systems. If I switch off the power one of the cabinet (including the Stratix) and put the power on again, after that switches are bloking all the trafic in the system for a few seconds. So, linking the system on will make switch to go fault. This can not be correct. What are the minimum settings that is needed to do for the switches, not to go fault during switching power on. I have made now smartport settings for the switches 'switch for automation' => no progress. Still same.

  18. Read device memory in L-series

    skammp posted a topic in Mitsubishi

    Hello all, I need to read device memory mostly I need to read R registers from PLC L26. I read device data, but inside of table, I can't find R or ZR registers. Can you help me?  What I did wrong?   BR KS  
  19. Input cards, DI8x24VDC BA, 6ES7 131-6BF01-0AA0, NEW in box ,quantity 10 IO-Link CD-Master 4SI SIRIUS, 3RK1 005-0LB00-0AA0, NEW in box, quantity 4 IO-Link Master 4SI IO-Link, 6ES7 138-4GA50-0AB0, NEW in box, quantity 3 IO-Link Communication Module, CM 4xIO-Link, 6ES7 137-6BD00-0AB0, NEW in box, quantity 1 CM AS-Master ST, 3RK7 137-6SA00-0BC1, New in box, quantity 1   Located in USA.  Make offer, shipping included.   Pictures available on request, send email address in a PM.

  20. Alarm Comments Not Showing on GOT

    PeterParker posted a topic in Mitsubishi

    Hello! Im trying to set up Alarms on my project using GT Desisgner 3. My GOT is a GS Series, and my PLC is a FX5U. I usually just do a multi state lamp with descriptions for what's happening on the machine, but this system is much more complicated, so id like to do an alarm screen. I found a few sample projects, as well as tried both the Simple and User alarm tools on my own. However once everything is set up, when an alarm is triggered, the comment for that alarm is missing... The alarm time of occurrence, as well as turning green when its resolved all works on the screen, but i cant figure out why my comment doesn't show up. When in my project, all the "previews" of my comments show up great and are all there, just not on the screen itself...   Any help would be greatly appreciated! Thanks!

  21. MELSEC iQ F FX5U and MR-JE-_C CC-link

    White_Wolf posted a topic in Mitsubishi

    I am new to PLC programing, I want to connect FX5U and MR-JE-_C via CC-link. When I connect FX5U and MR-JE-_C directly everything works, but when I connect them in HUB (I need to use HUB because later I want to connect GOT2000) I am getting error 86.1(network communication error) on amplifier. Previously I set up IPs shown on pictures below, now sometimes works, sometime doesn't work and sometimes works for 30 seconds and I get same error. Did I miss something? I don't know what to try else.  
  22. Hello All,   Semi-noob here with Mitsubishi PLCs. I'm starting a project in which we are upgrading an existing A Series PLC with the Q.  Is there a datasheet somewhere that lists compatible software within Mitsubishi's lineup? I had no luck in searching their site.   Also, (in the same project) the existing network uses DeviceNet. I have the Q series compatible card for that - but within what software does one configure the network?   Thank you.
  23. Hi Everyone,   I have  NT31C-ST142-V2 and it has a prompt of "System Program not exist or incorrect." I am trying to transfer via NT Series System Installer but I am getting a time-out error. I have Xm2S-09 serial cable with ATEN serial-to-USB cable.I know it is not broken since I can still Upload/download on a CJ2 PLC. I just want to know what other things I can do upload a systemprogram. I have seen a comment on this site that he remove the battery then tried to upload again.   NT is almost 15 years old. I have a back-up program.   I can't seem to upload by this time for pictures of theH MI and the screenshots of software .

  24. Omron NJ501 - IFM IO-Link - Wenglor U1KT001

    andrei.apopei posted a topic in Omron

    Hi, I am looking at reading an ultrasonic sensor value through IO-Link, using a Omron NJ501-1320 PLC connected through EtherCat to a IFM AL1332 master with a Wenglor U1KT001 Ultrasonic sensor. I have managed to read the 2 outputs of the sensor using this: Output_1 := TestABit(USINT_TO_BYTE(TxPDO_input_byte_1_6000_02),USINT#0); Output_2 := TestABit(USINT_TO_BYTE(TxPDO_input_byte_1_6000_02),USINT#1); But cannot read the ultrasonic sensor distance value, this is what page 2 in the manual says: Measured Value in 1/10 mm 2…15 14 Bit 300…4500 Octet 1 Subindex 3 (LSB) 2 1 Bit Offset 7 6 5 4 3 2 1 0 I tried a couple of conversions but couldn`t get the distance reading. Any ideas? Help appreciated.
  25. Hello everyone! I've installed GX works 3 according to the instructions in "https://plc4me.com/gx-works3-v1-308q-mitsubishi-full-real-100/". I don't get any errors, I can run the PLC and simulate completely OK. In the communication test, when the configuration is missing some components in the module list: Input, output, I / O module,... (https://ibb.co/ZVMcmQn) I hope you can answer for me?