Search the Community

Showing results for tags 'CC-Link A-Series Parameters'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 144 results

  1. CC-Link AD/DA IQ-R

    Yahya posted a topic in Mitsubishi

    Hello everyone, I am studying Mitsubishi R-Series PLC with GXwork3. I don't really understand communication using CC-Link. Below I have the module configuration that I use. My hope is that the Digital operation value of the AI module is stored at addresses D0-D32. and I sent AO to address D100-D132.  can someone guide me to give me an example of how to set parameters and create a program. thanks you

  2. Q-Series - Operation Error 4100

    d4rkm4n posted a topic in Mitsubishi

    Hi guys. I found error on PLC and from PLC diagnostic I found this Operation Error 4100 as per attach picture. FYI, there is no SD card mount onto this PLC. I wonder what is ATA card. This error wont affect the operation. Any advise on what to check?   This ladder is pop up when I clicked, error jump.   Thanks.

  3. R60DA8-G & R60DAI8 ISSUES

    FRANK RUIZ posted a topic in Mitsubishi

    Hello all, We’ve been having some issues with Analogue Output cards (R60DA8-G and R60DAI8) on some projects we’ve been doing and wondered if you could help.   On one site where we are using the R60DAI8 we have the following issues: when a valve is failing on site (wired to the first analogue output channel) the ERR LED comes on for the disconnection detection error, should this error come on with a valve failure/instrument failure or should this be for physical disconnection only? Also, site are reporting that the other valves analogue outputs on the card stop working when this happens. We have had a response previously from Mitsubishi support suggesting that this shouldn’t happen (basically they pointed to noise), could be wiring or it could be caused by external noise. Would replacing the R60DAI8 with an R60DA8-G resolve this issue?   General issue for both R60DAI8 and R60A8-G: When the Disconnection Detection Error is no longer present the ERR LED is still on so we have had to issue a reset to the “Error clear request” bit of the card (YF) to clear the error (currently a manual action from the HMI). Is there a way that this can auto clear when the detection error is no longer active? The only other way we can see to make this clear automatically is if the card has an error we could periodically issue the “Error clear request”, is there any issue with doing this if there’s no way to set the card to auto reset? The R60DA8-G has a detection auto-clear enable/disable setting but only has 100 times and from the manual this suggests a 100ms period between resets, so does that mean it only checks to auto-clear for 10 seconds the ERR LED is on and requires the “Error clear request”?   Any help with this matter would be much appreciated.

  4. PT property NB series

    diraemon posted a topic in Other Omron Software

    hello everyone, I want to ask this setting. If I check this check box, what will happen to the program that I input into the HMI? can someone give me examples for not allow upload and not allow decompile?
  5. hello, anyone. I want to ask about file which is I cant open. I was uploding HMI NB series but the file is only .pkg and when I decompile, it cant be done/ failed.. can anybody help me and explaine how is it can be? I use NB3Q-TW01B. thank you.

  6. Series Six PLC Expanded I/O addressing

    Automation_Guy2 posted a topic in GE

    I have a program to convert from Series Six to RX3i and the series six is using expanded addressing. I need help to convert this to standard addressing. I found a manual for this but I still can't figure it out. For example I have  addresses  I1+0201    I1+0203    I1+0205    I1+0206    I1+0207 and need to represent them in RX3i. I attached the 3 page "manual" on extended I/O for reference.   Thank you in advance for looking at this Series 6 Expanded IO Addressing.pdf
  7. which programming cable use for Mitsubishi Nexgenie 1000 Series (NG16DN)  PLC ? PLC has 9 Pin D Male Connection.
  8. Hello. What is the best option using TCP/UDP communication to use CP1L-EM40 as SLAVE / IO Expansion? For MASTER I’m using CJ2M-CPU31. Since now I’ve used FINS _CPU010_SendData and _CPU011_ReceiveData function blocks. The problem is, that I’m communicating with 6 slave IO units and to read/write all 6 units it takes up to 1 – 2 seconds. I’ve tried Ethernet/IP protocol but CP1L units doesn’t support this protocol. Is there some kind of different TCP/UDP protocol which is faster than FINS?  In older days you could use PC Link but this protocol is for RS232 / RS485 comm. I know I could use CP1W-EIP61 but I don't have this adapter and I can't afford to buy one Thanks. 
  9. Hello, I am trying to create a project in GX Works 3 with a R02 CPU, but in the "New" Tab "Change Module" Tab this CPU doesn't show. However, if i gow to Module Configuration i can select and drag the R02 CPU, but i can't define it as the CPU of the system. Another problem i have is that i need to migrate a A1SH CPU project to an R02 CPU project. From my understanding the software tool for A1SH is GX Developer and for R02 CPU is GX Works 3. Is there a way to convert the project or i need to do a new one and adapt it? Thank you.  
  10. Hi everyone, I have a question for you all, Is possible to configure CJ2M-CPU11 with tags trough network configurator to connect Control Logix PLC using EthernetIP? I did a configuration with CJ2M-CPU31 and Control Logix PLC with no problem, but now I need to communicate CJ2M-CPU11 with Control Logix PLC using EthernetIP. Some of you did this configuration between this two PLC before? Regards!
  11. Dear Forum, I am working on a set of "drivers" for some VFDs and wondering about you guys experience with it. The system layout is as following: FX5UC RS-485: MODBUS-RTU RS-485, lets say with 1x Mitsubishi F840, could be other drives (one drive per FX5UC) Ethernetport: Connected to GT2510, using Freqrol driver Another setup is for some other reasons not possible. I want to have one PLC program for different connected VFDs, scheduled VFDs at the moment are: Mitsubishi F-840, ABB ACS880, Toshiba L.V. VFD, Toshiba T-300MVi.   What I want to do: Read & Write status information - done. Read monitoring values - done. I want to setup some VFD parameters via the HMI. Send the parameter to the PLC and from the PLC to the VFD. The parameters are "basic VFD parameters", every VFD should have, such as: Torque boost, accel/decel time, min/max frequency, base voltage/frequency, etc. Of course these parameters are not simple Pr.0 to Pr. 125 but spread all over the place. I want to check for min. and max. limits inside the PLC before transmitting the data to the VFD. Knowing "basic parameters" will turn out quickly to "VFD specific parameters", I want to be prepared on the programming side. The APSRW for read/write parameters are called through the program and hand shakes with other APSRW calls.   What would be a good approach do to the above?  I rather invest more time into the PLC programming rather complicated HMI-Handling. Reading simple 125 words and the next 125 words, then writing 125word and again the next 125 words? Reading / writing individual parameters? Reading / writing 125 parameters at once? Any other approach for implementation?   Best regards, MarkusR  

  12. CCM card in series six rack

    alw_off posted a topic in GE

    I finally got my LM6PC software to communicate with my series six CCM 2 card. The CCM2 has 2 ports. I am trying to use both ports at the same time but when i go online with my lm6pc software it kicks my nematron HMI offline. I believe both ports are independent so i am not sure why the HMI is getting kicked off. I have another CCM card and would be open to having 2 CCM cards in my rack but when i tried this both cards failed (bottom LED in OFF state). FYI - running Win 10 with DosBox 0.74 using docking station com1. Fought this thing for 2 days until i realized i was using the wrong CPU ID.  Project background - replacing series six and genius blocks with RX3i and EP IO. Trying to reverse engineer nematron HMI and wanted to be able to view data tables while surfing the HMI to map out the IO addresses. Thanks for any help. Steve
  13. I am trying to setup a CC Link between two machines. I have done this before without issue, but for some reason this is not going well.. I added a second CC link card to CPU2 and set it as ST 24 for the CPU1 network.  CPU 1 : Master.   cc0.jpg.   The original machine was setup using TO/From for each station, so i couldn't add this new link through the GUI.  CPU 2: Local cc1.jpg  When i try to use the GUI to setup this side the buffer stops working. but if i activate any TO/From instruction here i get a system fault with a 2110 SP. Unit Error CPU2 buffer cc2.jpg. But when i block the TO/From you can see the buffer is working at that exact same location specified.    2110 error says I am addressing the wrong card but the buffer proves that I am not. 

  14. String Compare Issues

    WattUp posted a topic in Mitsubishi

    I am trying to set up a string compare [ $= "Text" D### ] . But it's not passing when it should. So i tried pushing the string to a place holder register [ $= D###1 D##2 ], but its still not matching, but when i just do a double compare [ d= D##1 D##2 ] it passes.    How is my string failing but the numbers obviously match?    Struggling to get picture to attach. Please see here for example.  https://imgur.com/a/w1ckk64  

  15. CC-Link IE Protocols

    Civet posted a topic in Mitsubishi

    Hello, There seem to be a lot of different CC-Link IE protocols: CC-Link IE Field Basic CC-Link IE Field CC-Link IE Field Motion CC-Link IE Field Safety CC-Link IE Control CC-Link IE TSN This causes me some confusion. Are there as many variations of Ethernet/IP and PROFINET? Can you point me to a good comparison of the different CC-Link IE protocols? My understanding is that: CC-Link IE Field Basic: 100 Mb/s Non-deterministic? Good for non-time-critical communications (e.g., setting a drive speed) Implemented in software Traffic can co-exist with other TCP/IP traffic Max 64 stations Addressed by IP address Star topology I believe the other protocols are all 1 Gb/s, are deterministic, are addressed by station number, are implemented in hardware and each needs its own isolated network. CC-Link IE Control is used for communications between PLCs and robots. CC-Link IE Field is used for remote I/O and CC-Link IE TSN is used for even faster remote I/O communications. Please let me know if any of this is inaccurate. Thanks,
  16. View File GE SRTP Ethernet Driver for .NET 6, .NET 5 & .NET Core. - ASComm IoT ASComm IoT for .NET 6.0, .NET 5.0 & .NET Core developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE/Emerson SRTP PLCs and compatible devices via Ethernet.   Does not require OPC. Does not require 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 6.0, .NET 5.0 & .NET Core targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux, Android and iOS Extremely high performance - 5~10 mSec typical transaction time Supports PACSystems family native tag names Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications Submitter Automated Solutions Submitted 12/05/22 Category Demo Software

  17. Version 1.4.1

    10 downloads

    ASComm IoT for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE/Emerson SRTP PLCs and compatible devices via Ethernet.   Does not require OPC. Does not require 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux, Android and iOS Extremely high performance - 5~10 mSec typical transaction time Supports PACSystems family native tag names Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications

  18. Logicmaster 6 Keyboard Translator Chart

    Darren T posted a topic in GE

    Hi, I was wondering if anybody could post a photo of the Logicmaster 6 IBM PC keyboard translator chart? This is a 'tear out' page from an appendix in the Logicmaster 6 programming manual. The 'Logicmaster 6 Programming and Documentation Software User Guide' Appendix C refers to this chart as follows: "This appendix contains a keyboard translator chart to use with the IBM-PC, PC-XT, PC-AT, or IBM-compatible personal computer. The chart has been printed in triplicate to provide you with extra copies. The sheet has also been formatted so that you can remove each copy of the chart from the manual for easier reference." All the hard copy manuals I can find have this keyboard chart removed and online pdf copies do not show this page. your help would be appreciated.

  19. Version 1.0.0

    29 downloads

    An example on ST is the definition of the fronts of a discrete signal.
  20. Function block on ST for algorithm DIFU DIFD View File An example on ST is the definition of the fronts of a discrete signal. Submitter drYurban Submitted 10/05/22 Category PLC Sample Code

  21. valve_control

    drYurban posted a file in PLC Sample Code

    Version 1.0.0

    49 downloads

    A working example of an FB to control a valve from an HMI panel. Controls closing/opening times, plus a little visualization.
  22. valve_control View File A working example of an FB to control a valve from an HMI panel. Controls closing/opening times, plus a little visualization. Submitter drYurban Submitted 10/05/22 Category PLC Sample Code
  23. I'm editing a dual language project for an NA5 HMI. It's working fine except for the message at startup. To modify the project I've had to update the firmware on the HMI. I'm using Sysmac Studio 1.15. Startup language seems to be set correctly. Any ideas?

  24. Printinting from Mitsubishi HMI

    Ravi thakur posted a topic in Mitsubishi

    Hello everyone I have Mitsubishi HMI GS2110 WTBD- N. It is connected with FX5U with Ethernet protocol. I want to run a printer directly from HMI with RS 232 without using RS232 adapter card. Can someone please help me what to do and how to do. Regards

  25. Hitachi H-702 Series MODE SIMULATION

    bolman885 posted a topic in Other PLCs

    Hey, does anyone know why the simulation mode is on? how to change it? (LED SIM )