Search the Community

Showing results for tags 'Analog Input'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 122 results

  1. Here are some videos training PLC AB(Rockwell) RSLogix5000 I hope this helping someones! 1) Setup RSLink to connect PLC using a USB cable   https://www.youtube.com/watch?v=mk-wgnwO4E82) How to set up hardware involve Input/Output, Analog, Device Net... PLC AB(Rockwell) RSLogix5000https://www.youtube.com/watch?v=pIUNPCEcNn03) How to use timer/counter/Compare PLC AB(Rockwell) RSLogix5000https://www.youtube.com/watch?v=7BDzAoFBJPMhttps://www.youtube.com/watch?v=EM3KO8JSYsMhttps://www.youtube.com/watch?v=yQtrIhTmwqA4) How to use Analog PLC AB(Rockwell) RSLogix5000https://www.youtube.com/watch?v=8raR0f7zr6M5) How to use RealTime-Clock PLC AB(RockWell) RSLogix5000https://www.youtube.com/watch?v=Lgg8hjs5jkY    
  2. Some videos  show how to use Real-time clock Analog Install Hardware Using timer Using counter  
  3. Omron Hardware

    Please let me know if it is allowed to sell PLC hardware on your forum. I accumulated lots of Omron hardware  that I want to get rid off. Here is the list, I have several of each type, asking $12 each plus shipping. All in working condition.  Base Unit C200HW-BI051 Base Unit C200HW-BC101 16 Point DC Input Module C200H-ID212 16 Point Digital Output Module 24VDC C200H-OD212 Power Supply Module C200-PA204    
  4. FX3U Analog Programming

    Hi,  Anyone can help how to program a analog coming from a level transmitter? I have 8 analog inputs (2 unit of FX3U-4AD) to be read out into the plc program. how can this be possible. I'm new to mitsubishi analog. it is different from my experience(using siemens before).   Hope someone can help.   Thanks!!!   Marky
  5. Anyone have experience with the Peak to Peak hold function on Keyence IL-1000 amplifier?  I have an IL-030 lase head running off it and I want to utilize the peak to peak hold function.   I connected the red wire from a generic 24VDC, 1A, power supply to the IL-1000 Pink/Purple (timing input wire) and the black wire from the power supply to IL-1000 Blue (0V).   I have a 24VDC, 5A, power supply connected to IL-1000 Brown (10-30V) and IL-1000 Blue (0V) to power the IL-1000.   What I thought might work is to plug the 24VDC, 1A power supply in and out of an outlet to trigger the timing input for the P-P hold (similar to an on/off button).  But it's not doing anything.   I am not an electrical guy.  Any tips here?  Thanks,
  6. HI I'm using PlC5/20 when I click on setup screen on the BTR block (to view the analog input configuration) i find the following message: No modules exist in the IOconfiguration for this R/G/M however the analog input signals is running properly....i just want enter the setup screen for configuration. I'm assuming that I need to enter I/O module in the I/O configuration? Can I do this without taking PLC to Program mode?  
  7. Version 1.0.0

    236 downloads

    FB for Option Boards in CP1L-EL/EM -Configuration of the option board left-right -Scaling Selection -Analog Input and Analog Output Conf. -Tested in CP1L-EM30
  8. CP1L-EL/EM Option Board Configuration View File FB for Option Boards in CP1L-EL/EM -Configuration of the option board left-right -Scaling Selection -Analog Input and Analog Output Conf. -Tested in CP1L-EM30 Submitter MPOLITIS Submitted 07/22/19 Category PLC Sample Code
  9. CP1L-EL/EM Built In Inputs

    Version 1.0.0

    201 downloads

    FB used for Built In Analog Inputs of CP1L-EL/EM With Scaling Set Up Included Demo_Built_In_v1.bak Demo_Built_In_v1.cxp Demo_Built_In_v1.opt
  10. View File CP1L-EL/EM Built In Inputs FB used for Built In Analog Inputs of CP1L-EL/EM With Scaling Set Up Included Demo_Built_In_v1.bak Demo_Built_In_v1.cxp Demo_Built_In_v1.opt Submitter MPOLITIS Submitted 07/22/19 Category PLC Sample Code
  11. hi really i  need the help from someone  i dont have any idea about the step to  a project  i wish to someone support me and help step by step  radouan_2020@hotmail.com
  12. A1S68DAV parameter

    please can anyone tell me how to set A1S68DAV analog output module parameters , such as voltage output and resolution? or is the parameter can't be set at aLL (ie, fixed at -10V to 10V)?
  13. Hi. We are struggling a bit with the analog IO on the EIC202 coupler. Have tried tag sets, and gotten the digital IO to work without problems, but not the analog. Any tips here? We are using 2x NX102 with 1x ID4442, 1x OD4256,  and 2x EIC202 with 1x ID4442, 1x OD4256, 1x AD2603, 1x DA2603 on each, for a redundancy-system. Software is Sysmac Studio. EIP connection.  
  14. Hello, My apologies in advance if this is in the wrong place. I am working on a press that is using a 1746-INT4 to look at the position of the ram.  The press is using an LDT as the sensor reading back to the INT4. It obviously works. The press runs everyday.  I'm wondering if there would be a reason to use this instead of just a voltage or current analog card?   Thank you in advance for the replies.
  15. VFD Analog output to LOGO!

    Hullo neighbors,  We've got a LOGO! 0BA8 configured to use I8 as an analog input, and the goal is to read the current operating speed of an ABB ACS310 VFD. (we want our PLC to be able to react to any changes in speed from the VFD) Problem is, nobody can figure out how to hook up the analog output from the VFD to the analog input on the PLC. Have tried going from AO -> I8 and have also tried adding a connection from the LOGO! input neutral back to the GND... nothing works.  Attached is the terminal diagram for both devices with our poor attempts labeled. Any insights?  
  16. I am new to Automation Direct software and how the programs are written. Can anyone explain how they handle the analog outputs? My processor does not support the IBox that makes life easier, so I am having to do it the old hard way. I understand most of the logic of how its done for sending data to one channel but I don't understand how the channel selecting works. Can someone give me a programming example or explain how that works? I am looking at the online manual that Automation Direct provides for you for the analog module but I am having a difficult time trying to wrap my brain around how they do their analog stuff ><
  17. Hello - I've recently started my adventure into PLC programming and I've found this site to be very helpful. I took on a project that requires control of a cylinder - the short and skinny is that the cylinder will have to provide position feedback and stroke to various set lengths determined by position of a selector switch. So - If position 1 is selected, the cylinder will stroke 20"inches. If Position 2 is selected, cylinder will stroke to 25"inches - so on and so on.   My questions is how to best go about this process. I may be having a brain-block and not viewing this clearly, but something is not clicking for me and wanted some advice. Planned on using Allen-Bradley's Micro850 PLC (had one on the shelf, and CCW software is free so why not). Thanks
  18. High-Speed Counter Input

    Hi, I working on reading impulse from the input. I am using M8000 as a contact, on the coil [C235 K9999] and it is working fine on the lad, but the problem is I need to applicate sth like that in structure ladder but I dont know how. I found function on the image below but it is for FX3U. I know that 2-phase 2-count input use OUT_C(for example EN True| CCoil CC251| CValue K0) and then DMOV(for example EN True| s CN251| d D100), so is there any method to read impulses from the input? .Thanks in advance. PS I have Mitsubishi FX3G series.  
  19. QJ71C24N INPUT PROBLEM

    I am using QJ71C24N to communicate with my devices, ASCII mode. I can send my output to the device by using non-protocol method ( G.output). However,  when I using G.input to try to receive the feedback from my device. The signal seen not stable to receive by my PLC. Sometime can get the full signal sometime can't and sometime I get some messy signal. Is there any setting I need to set to get the stable feedback from my device? Please anyone can help me to solve this problem? 
  20. Mad42 analog setup

    I am trying to setup a MAD42 analog card up in a cpu33 omron controller.   I need input 1&2 setup for 0 to 10 volt and can't get it to work. Any help is appreciated. 
  21. Hello all. I have been working with an SLC 5/04 system, which houses various Digital and Analog INs and OUTs, up to Slot 29. I am currently mainly working with Slot 25, an Analog Input: 1746-NI16I. This is a system which has already been set up and has been running for the best part of 8-10 years. This particular card has had some spare inputs, one of which I am trying to connect to. In the Advanced Configuration, only a few Channels are actually "Enabled", and each channel is pretty much slightly different from another in terms of Input Type, Filter Frequency and Data Format. I am trying to set up Input 14, which is Channel 15, to "Enable" it, 4-20mA Input Type, Filter Frequency of 6 Hz and Data Format of either Raw/Proportional or Engineering Units. Now, after I have made my choices, I click apply, and then OK. I am then confronted by a pop-up which states: "Configuration Rung and Data Integer Data File Number: 25 Integer Data Element: 100 Rung to be inserted: XIC S2:1/15 COP #N25:100 #O0:25.0 24 At Program File Number: 4 82" I have the options of OK or Cancel. If I click OK, I now have LAD 4, Rung 82 Highlighted. This First Scan Bit and COP function were already here, but does that mean I have now altered what is being written to "#O:25.0"? I now Download the Changes. However, after all this, I am not getting any Analog input reading coming in from the Live PLC. What is this COP function? What does it do? How do I properly set up this Analog Card?   Thanks for your time, -Jame
  22. Hello. Can anyone tell me if there is a function for this in gxworks2? I want to even a jumpy analog signal. I am aware there is a MEAN-function, but that needs me to feed an array of buffered analog values to it. Which I am not familiar with how to do. Cheers
  23. Delta PLC Analog Noise Reduction

    Hello All, I am Using Delta SE Series PLC and 06AD Module for Pressure Transmitter. But Analog input get fluctuate continuously. Is anybody have program for analog scaling.
  24. Looking for a little help.  Replaced a 1746-NO8V analog card that hadn't been working for years and the new card is giving a Configuration Error (Module LED flashes twice, all 8 outputs are flashing 12 times).  I have 2 other of the same cards in the same rack that have been working for a very long time and still working that seem to be configured the same way.  Is there any way to know what is wrong with my configuration.  or maybe my new card is just bad???  I have not yet swapped one of my working cards with the new card, have considered but really think I'm missing something.
  25. Hi! Allen bradley PLC RS Logix 5000 I have a problem with a SMC pressure sensor (ISE30A if I remember correctly). When I monitoring the raw data from the ananlog module, I get about -7710 value, when the smc display shows about 0. There are another SMC pressure sensors too, and if the sensors displays shows 0 then the values what I get form the analog module is about 0 too, so the others work properly. But this one don't.  I already check the wiring. I have no clue waths the problem. Any idea from anybody? Thank you for your help.