Search the Community

Showing results for tags '700s'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 3 results

  1. Hello ! Need your help please . Powerflex is flashing yellow  an alarm condition exist (run inhibit stat) bit 1 is true ( no enable) ! What is exactly the problem and thanks in advance .
  2. I have an issues with various Powerflex 700S drives tripping out periodically on Net Loss DPI P5 fault (F# 59). These drives are set up on the same ControlNet network to communicate with the Contrologix 5563 processor. The drives will reset easily and the process restarted, but it is a nuisance and time is lost resetting the equipment. Any advice will be appreciated.
  3. Hello, I have an interesting problem that no one in our company can really answer for me.  We are using Drive Logix with a powerflex 700S phase 2 drive and controlling a machine that rotates 360 degrees, sits for a moment, then return back to zero degrees.  We are using the MAM instruction to tell the drive to run the motor to its desired degree.  The problem we seem to face, is when they change jobs, the weight changes and we have to adjust speeds in order to get the machine to rotate back up to 360 degrees.  Otherwise, the motor stops short.  It usually never faults or alarms, it just stops short.  For example, they might run it and it will stop at 240 degrees or 315 degrees rather than the 360.  My question is, why doesn't the drive continue to push the motor to 360 degrees?  Why wouldn't the drive fault out on something like over current?  It seems that it just stalls and stops.  Sometimes, the machine will be running great, but on occasion (1 or 2 times a shift), the machine will stop short again.  I am curious what causes this and how I might be able to fix this to force the drive to continue to try and get to that desired degree. Thank you for any help or input!