Search the Community

Showing results for tags '2 hmi connect to m221'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 31 results

  1. SIMATIC S7-300 training kit not working. PLC doesn't go to RUN mode, and still in STOP mode all the time. STOP mode led is blinking every 1 second, even when I press MRES key. This is a video I recorded for issue demonstration: https://www.youtube.com/shorts/ISMPH_zNuG4
  2. I have been trying with an Ethernet cable and a 1747-pic i am 100% sure there is user error need to download a program into the PanelView i have the correct software rslinx and panelbuilder32 help I'm trying to learn
  3. Can USB-A2 connect PLC through PROFIBus? Can profibus connect sub-stations directly for diagnosis?   There is a 3152dp, which communicates with the sub-station through dp, and it is inserted into the dp head of cpu. It is not connected by automatic mode, but can be inserted into mpi port. Do you need any Settings?
  4. I have problem when try to connecting M221 PLC to Citect SCADA 2018, I have try using twido and OPC KepwareKEPServer in device communication, but still can't connect when I using Ethernet to the device     Thank You
  5. Hey Guys, Modicon M221 PLC, programming with Machine Expert. I have a project that I must create shifts for heating elements, requiring that some heating elements, those who were on for the longest period, do not turn on in the next shift. I'm looking for a sorting mechanism to determine what %MW (6 words of 8 total) have the largest value. I would like an array of 8 words, sort them, and retrieve the highest 6 or highest 4 or highest 2.   Thanks.  

  6. connect encoder to nx1p2

    hamid-tehranplc posted a topic in NJ Series / Sysmac Studio

    hi everyone i have a question about nx ec0122 i connected an encoder to ec0122. now i want creat a programm for read the pulse and reset pulse. Then write a program to measure the length of a roll. How should I do this? Thank you for your help
  7. Hello, I need to replace an obsolete twido PLC to Modicon TM2221ME32TK and in the process would like to get the variables back into Citect SACDA V7.2 I have been reading up on REad_var and write_var but am seeking clarification on how to get the existing %MW, digital inputs %I0.0 etc and outputs  %Q0.0 mapped into modbus registers so SCADA can read them.  I intend to use modbus TCP/IP communcations with the ethernet/ip adaptor.  Do i need to use read and write_var to map into the addresses? Please find attached existing PLC code.   PLC.twd
  8. Hey! Whats up guys ;) I'm a student and I have been saving up money for PLC for quite a while now, I was recommended to use Schneider M221 TM221CE24R PLC. after buying it I looked online for some HMI and due to high price tag I ended up buying cheaper Kinco GL070E HMi for learning :D I'm trying to connect them both together using Ethernet cable but I'm having difficulties making them connected. The lights shows up ( blinking green ) and ( solid yellow ), I have tried Modbus TCP Slave, Schneider Ethernet (TCP Slave), M series, M200 Ethernet ( TCP Slave ), but nothing seems to be working :D  The best I got in 3 weeks of trail and error and countless non-english videos on youtube :D is error message on the HMI -> [2] PLC NO RESPONSE 0-01-03   I'm trying to learn and seems like I have hit a wall. Can anyone help me to see if it is even possible to connect them or do I need to save up for new HMI :( Any help would be greatly appreciated, sincerely Engelis :) 
  9.   Good afternoon, dear specialists. Recently, only without preparation, I began to set up communication between the scada and the PLC. The problem is that RSLINX LITE (v3.90.01 CPR 9 SR9) sees both PLCs on the network, but one of them gives a problem with reading data, or rather, the data monitor does not load at all (or shows a red cross (which means there is no physical connection to the PLC)). But it responds perfectly = 1ms. Nearby is an old PC with an old RSLINX LITE (v2.41.00) that perfectly reads data from both PLCs. What is the problem? why doesn't the more recent program read the data? There is an even older PC on Windows XP on the Intouch scad, via OPC the "SMC" application also reads data without problems New PC:                                               Old PC:                                                still the third ancient PC: Windows 10                                         Windows 7                                            Windows XP RSLINX LITE v3.90                             RSLINX LITE v 2.41                             SMC (intouch) Status Not working                              Status Working                                      Status Workinп It was also connected via the "Ethernet" and "Ethernet / IP" drivers. I directly connected a new PC to the PLC and set up only one connection, still the result is negative. I would be grateful for any help! If I apologize for my English, I did it through a translator.    
  10. An IoT system that have a Web server from node Red and Grafana for Power Monitoring, the Pump is controlled by the Schneider PLC M221 with a HMI from Weintek MT8071i with Modbus communications on TCP with RTU Gateway from Volison ADM 5850g  

  11. connection to omron CJ1M PLC

    jorism posted a topic in Omron

    I have an omron PLC (CJ1M type) at home which I would like to connect to, however, lately, I can't anymore.  I'm trying on two different PC's a newer and an older one, both running on windows 10. 1 is just mentioning a DLL error and I can't even start cx-programmer, the other one seems to work, however, when I try to go online it always fails I'm using a usb to serial device and after some searching on the net, I thought the issue was with the prolific driver.  I tried all kind of fixes, but nothing seemed to work.  I have now purchased another device, the XS8801 from usconverters and installed the latest driver.  I have checked if cx programmer is set to work with the correct port and this is the case. My knowledge is very limited but I would really want to connect to that PLC again, so hoping someone out here is able to help me. Thanks a lot    

  12. M2I & Modicon M221 interface

    NoamC posted a topic in HMI & SCADA

    Hello, I have an M2I Top RW (model: 1000WD) connected to a Schneider Modicon M221 PLC. The HMI is connected and I is working perfectly reading data from the PLC via ethernet. I can't seem to find a way to write to the PLC from the HMI. I would like to control the PLC from the HMI, I know this is possible with Fatek PLCs with the same HMI model. please help - how would I create a bit command from the HMI to the PLC? what registers? what inputs in the PLC? thanks
  13. Hi guys, I'm in another project with another brand on PLC and this time I thick I hit a pretty solid wall. Long story short, I need to change a -10 +10v signal send to a DC motor drive based on a "recipe" selected with a 10 positions camswitch. I've never programmed schneider PLC, except the zélio one who are pretty simple to understand. Apparently Modicon are much more complex to program with the knowledge I have. Is there documentation available somewhere I can use to understand how to code analog output.
  14. hi guys i am using my Schneider m221 plc  but facing this below problem. how can write modbus address  i am trying below register data address but not accept this register data  address example i write %MW0:=16#10001 %MW1:=16#10002 %MW2:=16#10003 %MW3:=16#10004 so guys how can write this register address can me  share one example so i understand. also share read var setting . ObjType: FristObj: Quantity: IndexData: Thanks

  15. Hmi temperature delta

    Must@@@@ posted a topic in Other PLCs

    I have connected 2 temperature devices with him delta with plc delta by rs485. When I run plc I can see the temperature change on pc but the problem in hmi  it's give errors. Com 2 errors  I need someone help me to connect these devices please 
  16. Hi there, Im having issues controlling ATV 320 VSDs over Modbus RTU with a M221 plc, does anyone have any pointers for me to look at? I believe I Have set everything up correctly but when I run the program on the plc the atv's just stay in 'NST' state I have included screenshots if they are any use   My speed reference in this example is taken from the memory word %MW0 which I am inputting via a HMI   I have addressed all my ATVs accordingly in there setting with the correct Modbus parameters and selected Modbus under the FR1 configuration, am I missing anything?? Any help is appreciated as I am really struggling   Tom
  17. Hello! I am new at PLC programming. I am using TM221CE16R PLC with TM3AI8 analog input module and SoMachine Basic v1.6. I am trying to scale analog input value. I am using 4-20 mA pressure sensor. I managed my wiring so that I get raw values in SoMachine Basic. But I don't know how to scale these values to usable values. My sensor works in range 0 - 16 bar. What is best way to get values? Is it PID function block or multioperand function block using equations to get range 0 - 16? I will appreciate your help.   Thanks in advance!
  18. Hi guys, I have an M221 and trying to read process data from a HACH controller via Modbus 485. In the Read_Var function block I need to configure ObjType, FirstObj, Quantity and IndexData. Slave ID is 3 and I am using SL2. So, say if I wanted to read to following registers, Register #40001, Data Type Integer, Length 1, Description- Sensor Measure Register #40005, Data Type Float, Length 2, Description - Sensor Temp Register #40007, Data Type String, Length 6, Description - Sensor Name what do I put into the Read_Var function ? I am completely new to this and it's just not clear to me. Thanks John   

  19. CP1E Direct Online failing to connect

    Liamo22 posted a topic in Omron

    Hello all, hoping for some help with an issue we currently have. We have a stationary unit provided by an automation company which is controlled by an Omron CP1E PLC unit. We have just purchased and installed the latest CX-One software with key etc as we are aiming to make modifications to the machine. When connected to the PLC via USB the drivers install however we get an error message when viewing the driver properties stating windows is unable to verify the digital signatures. When attempting to connect via USB direct online we get a failed to connect to PLC error.  We have tried updating the drivers but it states the most up to date drivers are installed. Also tried uninstalling and reinstalling drivers. Anyone able to offer any advice? We have no experience with Omron so unsure if there is something we are missing. Thanks!
  20. Hi everyone My system consists of 2 main stations with 2 CPU Q06UDEH and connected together by QJ71GP21S-SX module but I don't know how to link the address between these 2 CPU together? so can anyone help me? Thanks so much   

  21. Omron CJ1m - bluetooth connect

    Dareko009 posted a topic in Omron

    Hi, I write app to smartphone to communication omron CJ1m and Android. I want to connect devices by standard bluetooth. I plug in bluetooth adapter directly to omron RS232.  I want to ask you, how i can connect by FINS command. Bluetooth device baud rate is set 9600. If i connect to omron, i sent code: "AC01" and i sent how long as omron return me "AC01" ?? And what's next command i sent? If I want read CIO 10 i sent: "0101B000000A" ? and FCS and "*" ?? how i calculate FSC? Is it XOR my data sent? 

  22. connect Mitsubishi FX in network

    antonio sanchez posted a topic in Mitsubishi

    Hello I have a Mitsubishi FX in my production line, but I have a problem, If I lose the electric power I lose the connection between PLC and network, I need to restart the PLC for connection again of PLC in my network.  
  23. Hello I would like to connect 2 HMIGXU 5512 to my Modicon M221 is it possible please?
  24. Hi, I am doing a project with three Omron Cj2m cpu.  I dont know how to connect More than one Omron Cj2m Cpu Plc in a same network to communicate each other with a Internal Memory addresses. Can any one help me to understand?
  25. hello Friends how can I Connect FX5U by direct RJ45 to download program on it and the type of cable should be cross cable or straight cable  Thanks .