Search the Community

Showing results for tags '1756-l1 serial cable(programming) pinout'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 213 results

  1. i'm trying to interface a 1756-dnb to a couple devices. i've got the rsnetworx configuration complete and dowwnloaded to the device. when i go online in studio 5000, the scanner is faulted out. the code is "16#0108 connection request error: connection type (multicast/unicast) not supported". what could be going on here? i'm using an l72s cpu and a 1756-dnb/a on the local chassis
  2. Version 4

    64 downloads

    MX Component manual for programming PC - PLC software solutions.   Details MX Component library functions and examples. 
  3. MX Component Programming Manual View File MX Component manual for programming PC - PLC software solutions.   Details MX Component library functions and examples.  Submitter WattUp Submitted 03/13/20 Category Manuals, Tutorials
  4. CS1D Programming

    Hi dears, I'm programming CS1D omron PLC, I created one project but in project tree i dont have function block section. when i change the cpu to CJ1 for example function block section will be add. how can i add function block to CS1D in my project? thanks.
  5. Hello Everyone, I am new at this forum, seeking help from you guys and gals. Scenario: I have a Controllogix 1756-L71 5570 controller installed with 1756-TIME module. The function of time module is to take time from GPS clock module in NTP format and send it to controller in PTP format. All the status LED's on Time module are OK. Also sync LED is Green. Still the time of controller is not synchronized with GPS clock there is a difference of 45 mins. Fellows please help. I'll be helpful.
  6. We recently added a new analog card to a remote rack that is communicates to a processor rack that has a redundant partner... We made the change when the processor was online, do we need to do anything on the redundant side? 
  7. Need help for FBD programming

    Good Day. Someone could help me to convert following ST code to FBD? I can make a program in ST language. I am trying to figure out how FBD works.  IF Var_1 THEN Var_2:=true; Var_1:=false; END_IF; IF Var_3 THEN Var_2:=False; Var_3:=false; END_IF;     Note: Var_1 and Var_3 are controlling from PC through Modbus TCP. 
  8. Hello. I am trying to make a serial RS 232C connection between Schneider Magelis HMIGXU3512 and Omron PLC CP1E. However, there seems to be a communication problems between both of the equipment. I am using cable XBT Z9740 for the serial communication cable. The format used is 8.2.N for both equipment. The baud rate is 115200. No Flow Rate is choose. Anyone can help with this kind of problems?
  9. Hi! I have a question about programming. I want to place an input (X01) on the left vertical line, to allow the rest of the program running by an external switch. How can I place an input like that? I work on Gx works2 and using an Fx3g Plc (I used it once, but i can't find that program.)
  10. Connect PLC to Kepserver

    I have Delta 12SA2 PLC it has RS232 port and I have connected it to kepserver (by Modbus serial) and then factory IO Now my problem is that when I connect my PLC to kepserver the RS232 port becomes busy with the kepserver and not available in the ISPSoft and therefore I could not demonstrate factory io and my logic in run mode in the isp soft together like you do in your videos. My PLC don't have ethernet port but is there an option in kepserver or any way by which i can use the same serial port of the PLC in isp soft run mode and kepserver+factory io together so that I can simultaneously show the logic running in isp soft and application working in factory io to my students. I googled a lot and found some softwares which make virtual serial ports for a given serial port but they don't work and soon hang Please help me I am in a great need of it. Thanks in advance.
  11. Hi there, is there anybody who use macro function in NB designer? I need list of C language syntax who can be applicable in macro. I have a task to migration from NP designer to NB designer who use different languages. Thank you
  12. Hello, I have been so many days trying to comunicate the multiway software trought a serial usb converter with the SCU31 device, using a omron function block to read a holding register, but I can't achieved it. Now Im receiving some frames on multiway, but there is always some errors. I was wondering if somebody in here that have worked previously with modbus and omron can be able to help me in how to configure everything corectly to be able to read the value from multiway, on the plc, and where is this value saved.  I'll upload some captures to show what I have done till now.    
  13. [ASK] Driver for FX3U-USB-BD

    Dear all... I am new here. I have a problem when connect my laptop to new PLC FX3U series. There was sign that I must update a driver for FX3U-USB-BD. Where can I get it for free? Could anyone here help me to share a link please?   thanks! Haniv
  14. Hello At first - sorry for my bad english. I have a FX2N-48MR with a FX2N-232IF and i only want to watch the X and set the Y over RS232 with a Crestron Contolunit. I use GX Developer 8 on a XP Laptop and figure slowly out how it works. I read the manuals i found, managed to send from the PLC to the Serial Program on my Laptop (Program named HTerm) But i do not figured out the sending. Can you give me some hint?   Greetings FT
  15. CJ1M serial communication

    Hi! I would like to know how I could send information throw serial RS232 communication. I mean, I have CJ1M-CPU11 connected with ID232 and OC201 modules, and I have an optic sensor (digital input). When the sensor turn on, I would like to be able to read the information (on/off) with an application like Putty (I have the PLC connected by RS232) to develop an application and show the information on another framework. I don't know if I have explained very well. Thank you!
  16. HI ,  Thanks a lot for the reply & help on previous topic. Now i setting up a new system with 2x CJ2M CPU13  and 2x SCU32 and the connection via 1000M RS485 cable. May i know the best communication to use for the serial communications?   Regards, TJ SHARON.
  17. Good day. I'm using 1756 L71S GuardLogix Integrated Safety Controller with Studio 5000 v28. My controller is connected to a third party software through ethernet connection, it simulates my project hardware and provides all the signals to my PLC. To know all the hardware signallocation at PLC memory, it uses a Tag export file provided by Studio 5000. In other PLCs, when you declare a variable as hardware input, you have to select in which address from the memory you want this input to be read, something like "Bit Input 0.0". But in AB this step is skipped, that is all addresses are managed by Studio5000 and hidden from the user. Is there any configuration at Studio 5000 that let me assign or at least see this addresses? Normally I would prefer my tags addresses to be hidden, but in this specific case it is more useful to know memory addresses.  
  18. I have a Modicon NOM0200 unit connected to an access switch to send commands to various rs-232 devices. The Access switch requires a "disconnect string" to end communication with a particular port. The disconnect string is "CRTL+D", how can I send a "CRTL" keystroke from the NOM0200 unit? I know for carriage return it is "$R" is their a similar combination I can enter for "CTRL"?  
  19. I am trying to program an analogue output on a Siemens S7-1500 unit from a 4-20ma sourced analogue input scaled over 0-250 degrees. The analogue input will have an adjustable setting in the software for when the alarm status should occur and at this point I want the analogue alarm output to start to process at 4ma, at 5 degrees above the initial set point I want the analogue output value to be 20ma I have no idea how to do this so any help from people is greatly appreciated and advice on which analogue output card to use would be helpful.  
  20. My SLC 5/04 is currently connected to a PanelView 1000 having only the RS-232 and using the SLC's bottom RS232 Port.  The PanelView Cable we can disconnect and connect a laptop, go online and troubleshoot problems, BUT we have to disconnect the laptop and reconnect the PanelView to operate the machine. Question:  Which of the other two Ports on the 5/04 could I use for the laptop connection leaving the PanlView connected? Also what cable to use on the 8-Pin Programming Port or the 3-Pin DH+ Port?
  21. OMRON PLC

    Is it possible converting Omron and Keyence plc's serial communication into Ethernet using serial to RJ45 converter?I need to connect these plcs with MOXA 5600 terminal service for communicating it to the Server.Thanks in Advance....!
  22. Hi guys. I have a new SRM50-HAV0-K01 sick encoder for my ELAU servo motor (model: ELAU sm 070-60-010-P0-45-M1-B0), and need to program it according to an old one (which seemingly is broken) via hiperface. device: PGT-11-S LAN software: SOPAS 2018.3 build 4.1.1.324 (Vm version 1.8.0_73) I tried to find any certain way for programming of sick encoders on the net using the mentioned device and software, but cant. all is only about datasheet or how to use teh software without an specific instruction. I am not even sure of that the old one is broken, except that in the analysis mode of the SOPAS (entering via hiperface) I can see the the  sin-cosin graph out of its limitation line. The thing is I have bought a special tool which has not any specific instruction and SICK group does not reply any exact instruction for my issue. Here is my questions:   How can I program the new encoder just according the old one?   And how can I assure that the new one programmed just as the old one?    and what is the definite sign of a broken encoder?   anyone experienced?
  23. 90 30 CPU350 serial connection

    ok running into a issue here, so we were able to communicate with the processor to download a program. transfer went fine. upon cycling power, we can no longer connect to processor. we used LM90 for the software. i've tried removing the battery and shorting out the "mem clear" points on the board, however we can no longer communicate with the CPU. we have a POWER and OK light solid on the power supply. kinda stumped here if anyone has any insight.
  24. Direct Logic 05 Ethernet

    I have a control that I want to use a Direct logic 05 plc in.  It is a really simple program but it is going into a plant that has a main control panel that runs the plant.  I dont know the brand of the plc in the main control.  They want to be able to send me a command from their plc to the direct logic to turn on my unit.  I suppose that would mean a simple set instruction to my plc.  I also have a couple alarm conditions that I want to send them.  For example if water pressure is to low I would put my unit in the alarm mode and send them a low water signal.  If the chemical is low likewise,   I dont have a clue how to do this in my program.  Can anyone give me some examples in direct logic plc program for making this happen??? Thank you Thank you Thank you. MikeC
  25. Hello,, I have motion controller A series A172SHCPUN,, I have written the program ladder into the CPU, but I can't write the motion program.. i dont have the program to open file the program motion and I want to ask if I have the software SW3RNC-GSVE, my os computer is window XP, Can it be installed? and is the cable transfer used the same as the ladder transfer program cable (SC09)?