Search the Community

Showing results for tags '1738-AENTR'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 10 results

  1. Hi there! I've been looking for some fault codes table for the 1734-AENTR adapters, since I'd like to show a message in HMI with some information when there is a faulty adapter, but I haven't found anything on the internet. So my question is, is there any type of table like this for these adapters? Right now I have a PLC with some AENTR adapters in the program for testing, and since there is actually no adapter connected to it, I can see a 16#2024 error in the module properties, but can't seem to find that info in the module variables.   Do you guys have any clue on how to find this information in order to show it?   Thanks in advance!
  2. Hi, So I have a problem, that BootP DHCP server doesn't find my 1734 AENTR series B and so I can't assign IP address to it. Been trying many things. Any advice? I'm new to AB and I guess it may be a really easy thing but so far I didn't find a solution. 
  3. Can anyone please share the input and output example wiring diagram for 1738 ArmorPoint IO modules (1738-IB16DM12 & 1738-OB16EM12)?
  4. Hello, My coworker and I are commissioning a new panel. We have a 1732-AENTR series C remote IO thats Rev 6.1. The project file from a previous identical panel has the module at rev5.3 in the project tree. I downloaded the AOP and ran the installer, it worked no issues. My co worker then did the same thing but now the module is unrecognized in the project tree and the module is missing after installing the AOP. Im concerned he corrupted something. I tried uninstalling and reinstalling the AOP but no luck. It works on my computer but not his? TechConnect said something about corrupting the aop core. My coworker did the first install and he was getting confused about zip files and the virtual machine we run rsl5k on. Maybe he broke it? any suggestions?
  5. I am trying to communicate to a AB 1738-AENTR on a OMRON ethernet/ip network. I have configured the AENTR module through the web browser and have been using Omron's Network Configuration tool to set up the network. I can see the AENTR but cant seem to communicate to it. I think this has something to do with the input and output byte size? Does anyone out there have any experience in setting up a 1738-AENTR in a OMRON system? If so, how do I determine what the proper byte size is? Also, is there something else I should be doing to get the module working?
  6. Client is wanting to use a 1734-AENTR with I/O and what not. When I go into the hardware tree to add I/O, its grayed out to add a new module to the hardware tree. JUST for this critter though, has anyone else experienced this?
  7. I am definitely a newbie in the world of PLC's. So I hope this doesn't sound like a dumb question. I do the electrical design for PLC's and have only done this for a few short months. I am currently working with a Point IO PLC. This is the first one I've seen. Because of the qty. of input and output modules, we had to add 1734-FPD and 1734-EPAC to boost the power. Easy enough, I get that. I bring power to the 1734-AENTR.....then, do I hard wire to the next module, or are the next adjoining input/outs connected view the internal power bus? Same question goes for the 1734-FPD and 1734-EPAC. I understand to bring power to those devices, but do I hard wire to the first module or is it automatically connected via internal power bus? I have done my research before I posted on this site. I think some of the installation manuals for these devices are conflicting., I think that's why I'm so confused. Thoughts? Does anyone know of a good trusted manual for such a question. Thanks in advance
  8. I am definitely a newbie in the world of PLC's. So I hope this doesn't sound like a dumb question. I do the electrical design for PLC's and have only done this for a few short months. I am currently working with a Point IO PLC. This is the first one I've seen. Because of the qty. of input and output modules, we had to add 1734-FPD and 1734-EPAC to boost the power. Easy enough, I get that. I bring power to the 1734-AENTR.....then, do I hard wire to the next module, or are the next adjoining input/outs connected view the internal power bus? Same question goes for the 1734-FPD and 1734-EPAC. I understand to bring power to those devices, but do I hard wire to the first module or is it automatically connected via internal power bus? I have done my research before I posted on this site. I think some of the installation manuals for these devices are conflicting., I think that's why I'm so confused. Thoughts? Does anyone know of a good trusted manual for such a question. Thanks in advance
  9. Hello! I am creating a project with Logix Designer, version 24. In the project I am using 1734-AENTR/B devices in etherner/IP-bus. I find out that there is only old versions of Logix Designer, only Major version 3 and 4 but the device that I have is the version 5. So I downloaded this EDS-file from Rockwell support-pages and installed it with EDS HW tool. After this, I can not choose this device 1734-AENTR/B with Major version 5. How to get this installed version to the project? After installation I have reboot my programming device and there is not RS Linx running in my computer.
  10. I need to add 1738-AENTR ArmorPoint Ethernet module to Logix5000 system. I have 1756-A13 backplane with 1756-L63 Controller and 1756-ENET/A Communication Interface. I believe I need to use 1738-AENTR add on profile but I can not find it and don't know how to add that to RSLogix5000. Can anyone point me in the right direction? I am using RSLogix 5000 Standard Edition, V18.02.00(CPR 9 SR 2).