Search the Community

Showing results for tags '1738-AENTR'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 6 results

  1. I am trying to communicate to a AB 1738-AENTR on a OMRON ethernet/ip network. I have configured the AENTR module through the web browser and have been using Omron's Network Configuration tool to set up the network. I can see the AENTR but cant seem to communicate to it. I think this has something to do with the input and output byte size? Does anyone out there have any experience in setting up a 1738-AENTR in a OMRON system? If so, how do I determine what the proper byte size is? Also, is there something else I should be doing to get the module working?
  2. Client is wanting to use a 1734-AENTR with I/O and what not. When I go into the hardware tree to add I/O, its grayed out to add a new module to the hardware tree. JUST for this critter though, has anyone else experienced this?
  3. I am definitely a newbie in the world of PLC's. So I hope this doesn't sound like a dumb question. I do the electrical design for PLC's and have only done this for a few short months. I am currently working with a Point IO PLC. This is the first one I've seen. Because of the qty. of input and output modules, we had to add 1734-FPD and 1734-EPAC to boost the power. Easy enough, I get that. I bring power to the 1734-AENTR.....then, do I hard wire to the next module, or are the next adjoining input/outs connected view the internal power bus? Same question goes for the 1734-FPD and 1734-EPAC. I understand to bring power to those devices, but do I hard wire to the first module or is it automatically connected via internal power bus? I have done my research before I posted on this site. I think some of the installation manuals for these devices are conflicting., I think that's why I'm so confused. Thoughts? Does anyone know of a good trusted manual for such a question. Thanks in advance
  4. I am definitely a newbie in the world of PLC's. So I hope this doesn't sound like a dumb question. I do the electrical design for PLC's and have only done this for a few short months. I am currently working with a Point IO PLC. This is the first one I've seen. Because of the qty. of input and output modules, we had to add 1734-FPD and 1734-EPAC to boost the power. Easy enough, I get that. I bring power to the 1734-AENTR.....then, do I hard wire to the next module, or are the next adjoining input/outs connected view the internal power bus? Same question goes for the 1734-FPD and 1734-EPAC. I understand to bring power to those devices, but do I hard wire to the first module or is it automatically connected via internal power bus? I have done my research before I posted on this site. I think some of the installation manuals for these devices are conflicting., I think that's why I'm so confused. Thoughts? Does anyone know of a good trusted manual for such a question. Thanks in advance
  5. Hello! I am creating a project with Logix Designer, version 24. In the project I am using 1734-AENTR/B devices in etherner/IP-bus. I find out that there is only old versions of Logix Designer, only Major version 3 and 4 but the device that I have is the version 5. So I downloaded this EDS-file from Rockwell support-pages and installed it with EDS HW tool. After this, I can not choose this device 1734-AENTR/B with Major version 5. How to get this installed version to the project? After installation I have reboot my programming device and there is not RS Linx running in my computer.
  6. I need to add 1738-AENTR ArmorPoint Ethernet module to Logix5000 system. I have 1756-A13 backplane with 1756-L63 Controller and 1756-ENET/A Communication Interface. I believe I need to use 1738-AENTR add on profile but I can not find it and don't know how to add that to RSLogix5000. Can anyone point me in the right direction? I am using RSLogix 5000 Standard Edition, V18.02.00(CPR 9 SR 2).