Search the Community
Showing results for tags ' you cannot use chan0 for any other user mode activity. you can use it for non-user mode activities -tcp/ip interface modules from rockwell/ab supported'.
Found 120 results
-
3G3HV User's Manual View File Older Omron AC Drive Submitter Michael Walsh Submitted 10/03/17 Category Manuals
-
-
Factory Talk View and Transaction Manager Issue
BiteBytesButes posted a topic in Allen Bradley / Rockwell Automation
Hi all, I need your help on Factory Talk issue, also for Factory Talk Transaction Manager, I suppose is the same reason. Windows 7 - 64 FTV SE 7.00.00 FTTM 10.10 I'm Windows administrator. ****************** Factory Talk Issue: Error message: (Error:0x800706ba) Error Failed to load VBA project display cannot be opened at run time. (This is the error to open the first display). Message from Rockwell knowledge database: Error in the OS event viewer mentioned domain controller cannot be accessed to authenticate user. ***************** FTTM Issue: Can't Start with Services. Error message: The Services could not be validated using the specified username.... -
I Was wondering what other people do in regards to the follow up emails that rockwell support sends out after you use your service agreement. I try and fill in all the questions and give good feedback but i have also ignored them all together and never heard anything else. For the record I am a big fan of the rockwell support it may take several calls to get a problem resolved but they have never let me down.
-
Hi all, I have created a program using the binary counter and timer instructions and everything works fine (yay!), but I am not entirely sure if there is a major difference between using Binary mode or BCD Mode on the PLC. Does it just come down to personal preference or is there an advantage to using a particular mode over the other? Also, does the operating mode affect anything besides counter/timer? The option in CX-Programmer seems to indicate it doesn't. Cheers, Jay
-
I got a CJ1M CPU11 that I can connect to but I can just go to run mode but when I try to switch to program mode I'm tell that I can modify the mode
-
Hi, I am new in the group and also a new user of PLC series 90-30 an we have a communication issue. I want to know how to go to baseplate configuration window through Cimplicity machine edition?
-
Dear All, My friend has software disk rockwell original. I want install rockwell ori to my PC, and i have isntalled it again, but it can not work ( OS PC Win7 pro ) Any can help me ? #how step install ? any some folder in disk : DriverExecutive, FTgateway, RS Emulate5000, RSlinkEnterprise, RSlinklite, RSlogix, RS network Thanks before edu
-
Hi, I’m trying to control 10 Safety switchgear using AS interface, and since I’m using Beckhoff as a PLC I want to use "KL6211 | AS-Interface master terminal" as a Gateway but since this is the first time I’m using Beckhoff I’m a bit lost, So my questions are: - Is it a good idea to use a Beckhoff ASI terminal? - How to configure it? - Is there a possibility to configure it using embedded PC ( I’m using CX2030)? Excuse my English.
-
Hello! I want to make a really simple PLC program that compare 2 number. How can I load 2 numbers from user and send to PLC compare operand? Now I go to CMP and with mouse set values. There is any "imput" component in CX Designer? Sorry my poor english :S Thank you!
-
Activation of Rockwell software in windows XP Virtual mode
dynamicboy posted a topic in Allen Bradley / Rockwell Automation
Dear Friends; Good day. First i install the windows virtual xp mode on Windows 7 64 bit. After installation i installed the FTM, RSLINK,and rslogix 5.0 in virtual xp mode. Then i activate the software by Factory talk manager and select the hard disk and for a single computer activation. This process successfully acomplished. But when i open the RSLOGIX it shows popup that activation path is not found. Then i again open the factory talk tool and note that there is no activation shows in current activate products, But the activation detail shows in the RE host tab. I re hosted the activation by using go to Rockwell site and message show successfully activation re hosted. *** Now i am stuck here is i loss my activation? *** in windows xp virtual mode how i activate my product that application find the correct path of activation file? ** In windows xp mode if i open my Computer there is shows other hard drive partition as well as Local disk C:\ and activation file save in virtual drive instead of real C drive in windows 7. But there is no file path option to save the activation. Its by default save on C:\documents and setting\all user\shared documents\rockwell\activation\***** Please help me how i activate my product in windows XP mode successfully? Thanking you. i will remain Regards -
Hello everyone, I was wondering if anyone here could explain to me how I can program my human-machine interface (HMI) to revert to a Home Screen after a period of inactivity. If the user has to leave at any time, and leaves the HMI on the last screen he/she was working on, I want the HMI to revert back to my Home Screen after 60 seconds inactivity. Has anyone here done anything similar to this before? Do you think it's worth the trouble of having such a function built into the HMI? Thank you for your time and for reading.
-
Discovering the Functionality of the PlantPAx Library of Process Objects (NEW DCS FROM ROCKWELL AUTOMATION) http://j.gs/14738575/plantpax -
HI, there. I am new to the Honeywell PLC, usually dealing with AB or Omron. Need some help from the Honeywell PLC gurus, my the only one PLC IPC620-1536 , suddenly stop working. No "Run" light or any outputs are present. Turning the "Mode Key" to the "program mode" and back to the "run mode" doesn't make any difference. I attached couple photo. My question, is any other way to start PLC running again? If I purchase the Win.Loader and communication cable and connect to the PLC, can I change PLC back to "Run" mode and upload the program, or fail to change the Mode using the Key. means the same fail using the software? Please update. Thanks for advance,
-
Hi, I can't add this CP1W AD041 analog module to mi PLC CP1H
-
HMI-GTO Change user password via script
satiat posted a topic in Modicon / Telemecanique / Schneider Electric
Hi everyone, I would like change user password on HMI GTO via Vijeo script. I don't know which variables store the password. Anybody as an idea? Thank you in advance -
Hi guys, I'm in the middle of a little university project, I'm attempting to implement a control system purely based on artificial intelligence. A neural network will be used to map the characteristics of a power plant. A fuzzy logic controller will be used instead of the conventional PID and finally a genetic algorithm will be used to tune the controller while the system is online. This is all simulated of course. Each of those AI's will be developed in Matlab. Only problem with that is, is it outputs the code in C or C++ (From memory). I would have to convert this to structured text (Based on Pascal). So to circumvent this problem I thought I would just directly interface matlab to the PLC (Schneiders M340). My idea being, all the calculations are done in matlab which are then sent back to the PLC. However this presents me with a new problem of how I would be able to interface matlab to the PLC. If anyone has experience with this sort of connectivity, any advice would be greatly appreciated. Thank you in advance, Luchek
-
Hi! I have my 1756 IF8 wired in high speed differential mode but i can't configure the RTS smaller than 11 ms. What I understand it should be possible to set as low as 5 ms if module filter setting is 1000 Hz. Is there anything else that i have to do?
-
Hi I have a big issue with machine user access using loggin and password. There are different levels of login (operator, maintenance and admin) locked with physical key or password. The problem is that whenever any other user sees the password or got the key he can use it later. Is there another efficient way to lock the access and may be record who is logged when and how? Thanks
-
Hi all, Can someone please help me, I am using a Micro830 Controller running connected components workbench software to program the controller. I want the use the Real Time Clock of the controller to control an output to turn on everyday at 01:30am and turn of when it receives a signal from an input. The output will control a backwash valve that will operate and activate a cam switch internally that sends a signal back to the Controller to say the valve has operated and can now stop sending the signal to the valve. (if that makes sense). I have tried playing around with the RTC instructions but I cannot seem to get it to operate how I want it to. Any help would be much appreciated. EnvrioService
-
Hi, I keep getting an error that project is in binary mode and plc is in BCD mode. Wont let me change either. I must be trying in the wrong place...please point me to where i can change this in the PLC. I am getting an error in my RXDU with a Honeywell barcode reader, on one machine, I am thinking it is related. thanks for any help.
-
Hello All, I'm completely new to the motion control systems and I'm interested in learning servo programming and motion control. I was trying to find a good resource that I can start learning from A-Z, but I couldn't find any. I have a demo kit with compactlogix processor and two kinetix 6500 drives with servo motors. What is the best way to learn it. If you guys have any resources or basic sample program please help me. Any learning material would be helpful. Thank You All
-
how to receive signal from E+H sensor by MVI69-HART to Rockwell PLC
wallace113 posted a topic in Allen Bradley / Rockwell Automation
Hi everyone, I want to receive signal from E+H flow sensor to Rockwell PLC( module MVI69-HART attached to PLC). I tried to use local 4 which is new local opened when I added successfully MVI69-HART(INT type variable) but it not work. Sensor's monitor display mA values (4mA -> 20mA). Could you please show me how to receive mA signal in PLC software or give me some documents related to this issue? Thanks. Have a nice day. ^^ -
Rockwell ControlLogix 5000 and SMC Flex
dadof3and3 posted a topic in Allen Bradley / Rockwell Automation
Gentleman… Does Rockwell have any simulation PLC code that mimics an SMC-Flex soft starter? Since we are using those (as well as the E3+ and E300) I would like to develop a model environment for starting of several drives. In a specific case, we may have 3 or 4 drives in a pool of drives in which only a subset must be running at any one time. Development of ladder logic for starting and maintaining those drives running while considering various fault conditions and startup issues would be very helpful in our environment. I would like to be consistent among various areas within our plant that we incorporate pools of drives, from 4 to 2. Having the ability to test in the lab would be very beneficial. Thank you, David -
Problem with reading Modbus registers In Vijeo Citect SCADA
pateldhavalsm posted a topic in Modicon / Telemecanique / Schneider Electric
Hello there. I have connected wireless module (master) to Vijeo Citect 7.4 using RS-485 to USB converter. My slave modules are supplied power from gird/generator and the master module is supplies from a UPS. I'm reading Modbus registers of slaves modules data via wireless master. Every time we have a power failure from grid, I get #BAD from all slave addresses. The generator kicks off within 30 sec. That is the slaves are off for 30 sec. Even after the slaves are powered on, SCADA does not poll data from it until I restart the SCADA. My current MODBUS parameters are: Inittype = 3, TimeOut = 3000, WatchTime = 10, Retry = 2. Could you please assist me on which parameters to change in .ini so that SCADA reads Modbus registers of slave for more than 30 sec. I tried increasing TimeOut to 30000 but it couldn't solve the problem. I would appreciate if some one could help me out. Thanak you in advance.
