Search the Community

Showing results for tags ' firmware revision 5.007 or later -1756-eweb controllogix ethernet/ip web server module'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 288 results

  1. Controllogix 5000 Bus Expansion

    Hello Every one I'm little new in AB controllers and i just begun lerrning about Contollogix 5000. The first thing that came in my mind is how Controllogix 5000 bus expansion is done? Thanx for ur help
  2. Hi. My goal is to communicate from a Wago 750-881 Controller to CJ2M With ETN21 on Modbus UDP. I can only find Modbus TCP function Blocks but would prefer UDP. Does it excist ? Cheers. WagoGrim
  3. Reporting for Siemens PLC

    Hello, We want to do excel reports on Siemens PLC. We do not want to use historian programs. Do you know another programs?
  4. CX-Supervisor can't runtime

    hello guys, i got a little bit problem with my cx-supervisor 3.2. when i clicked the cx-supervisor development project, the message showed that cx-server detected a problem during initialitation. But it could enter the program with the new message again that access to the cx-server project has been denied and finally it surely could not runtime. After that i tried to fix it with uninstall and re-install but the result was the same. Please i need help to solve this problem. i have fixed it as much as i can it didnt work. Thank You Best regard
  5. Hello! I am creating a project with Logix Designer, version 24. In the project I am using 1734-AENTR/B devices in etherner/IP-bus. I find out that there is only old versions of Logix Designer, only Major version 3 and 4 but the device that I have is the version 5. So I downloaded this EDS-file from Rockwell support-pages and installed it with EDS HW tool. After this, I can not choose this device 1734-AENTR/B with Major version 5. How to get this installed version to the project? After installation I have reboot my programming device and there is not RS Linx running in my computer.
  6. Question about firmwares

    Hello. I searched for an answer for this but it is still not very clear to me. I have a new Guardlogix 1756-L72S. I would like to create a project to work with it with firmware version 20.13. I have RSlogix5000 v20.01(CPR 9 SR 5) which should be compatible with it (in fact I can open projects with another guardlogix that have that firmware version) BUT when I create my new porject, the firmware version RSLogix5000 puts is v20.11 1. How could I create a project with the firmware version 20.13 for my guardlogix? (Didn't find an AOP for this) 2. If I update the guardlogix to firmware 20.13 with the CONTROLFLASH, could I still be able to go online and work with it, even though my project has a different firmware version? Thanks!
  7. Hello everyone, I will be working on an automation project with an AB PLC, but so far I have only worked with Siemens. The system requirements are the following: Modular PLC that supports Ethernet communication (To use a PanelView), 10 DI, 10 DO, 10 AI and 10 AO at least and capabilities for ON/OFF and PID control instructions. I have been checking the selection guides for the SLC 500 System and the CommpactLogix System, but only found the PID instructions capabilities in the SLC 500. Probably the 1756 Controllers are too big for the I/O number necessity. I would like to get some advice about this selection, I am almost sure that the SLC will do the job, but if some other one that's smaller and more economical can have the aforementioned capabilities it'll be a better choice. Thanks in advance
  8. Omron<-->Bosh Rexroth Ethernet/IP

    Hi, I'm trying to set up communication between a cj2m plc and an indra drive servo driver from bosch rexroth over ethernet/ip. Tried following a youtube video from rexroth explaining how simple this drive is to set-up with a 3rd party plc.... I have no experience with ethernet/ip, but what the video describes, i can't seem to do with omrons network configurator. more specific info on my equipment. Indra drive: HCS01.1E-W0013-A-02-B-ET-EC-NN-NN-NN-FW Firmware: FWA-INDRV*-MPB-17VRS-D5-1-NNN-NN PLC: CJ2M-Cpu31. rexroth info says there is no eds file for this firmware, i have to use a generic ethernet module, and set up from there. I've tried everything i can think of and implemented all googled info i've got to no effect, can't get communication. Any help getting this drive running is very appreciated. Thanks, Frank
  9. *** SOLVED*** When opening a source or trying to connect to a 1756-L61 I get the following error: failed to open file..... Support for the 1756-L61 controller is not installed. All EDT files for it seem to be installed and I have no idea what else I need. Does anyone here know?
  10. Several years ago before I arrived at my company, an integrator came in to do the automation on our system. They used a Controllogix 1756-L61S for the safety portion of the project. Apparently, when they completed the job they did not provide the source code with comments, safety password, etc. for anything and it got ugly between our company and theirs. In other words, they would not provide it if we went back to ask them. Allen Bradley has told us that we can not make any alterations now to the safety logic because we do not have the password that was used to create it. And they said there is no longer a master password that you could use like in previous controllers. Does anybody know of any workarounds for this? Or have heard of anything that might possibly work?
  11. I have camera Keyence connected via ethernet to the S7-1200. In the cameras can be set about 30 "tools". Each "tool" perform a different function in the image. In what way in the program code on S7-1200 I can read eg Tool number 10? For example, if tool 10 is the correct I want to to value 1 on some tag for eg camera_tool1. Thank you in advance for any help. Regards Mikołaj
  12. Q. Is anyone aware of a manufacturer of ethernet power adapters that work on 575V (600V)? There are plenty of adapters for 100-240V, Linksys PLSK400 Powerline AV 4-Port Network Adapter Kit but I need them for 575V. Any help greatly appreciated. Many thanks!
  13. Automation professionals, I would like to read the display values of a red lion DP700 in a control logix PLC. I was able to successfully integrate both devices through EtherNet / IP and I am geting the corresponding values in a DINT register in the PLC. But the problem is that the value in the PLC register is not in the same format as in the DP700 display. The display reads the length of a product in inches like 288.484 etc. Where as the value in the register is a 10 digit number like 1133526516. For sure, there is a definite correlation between these two values but I am not able to figure out the exact relationship as a function of a formula. I have given below 25 data pairs for your analysis. I tried to find out the scaling factor (slope and offset). The scaling that I found fit the first 10 records but did not fit the remaining 15 records Can you help me to find out the relationship between the ? # DP700 PLC register 1 288484 1133526516 2 288627 1133531202 3 288631 1133531333 4 288739 1133534872 5 288741 1133534937 6 288742 1133534970 7 288746 1133535101 8 288757 1133535461 9 288776 1133536084 10 288796 1133536739 11 241060 1131482972 12 241043 1131481858 13 241027 1131480809 14 241032 1131481137 15 241055 1131482644 16 241038 1131481530 17 241078 1131484152 18 241025 1131480678 19 241030 1131481006 20 241037 1131481465 21 241040 1131481661 22 241023 1131480547 23 241053 1131482513 24 241041 1131481727 25 241077 1131484086
  14. Hi All, I newbie in allen bradley usage. I am trying to configure 1756-SYNCH profile in RSLOGIX V21. According to help of "Associated Axes" tab, Axis 0 can support AXIS_SERVO, AXIS_SERVO_DRIVE, AXIS_CONSUMED, or AXIS_VIRTUAL. To cross verify, I have added AXIS_CONSUMED in my project but AXIS_CONSUMED tag is not showing in axis 0 choice selection. Can you guys please help me why AXIS_CONSUMED is not showing in choice selection of axis 0 and axis 1.
  15. Hi ALL, Can Schneider Electric CitecSCADA 6.10 talk to AB Micrologix 1100 via a Ethernet Interface Communication Module [1761-NET-ENI ]? And what Citec Driver can I use to set this up? Thanks Chris
  16. This is my company's first time using a Mitsubishi PLC and our partners/clients advised us against using the built-in Ethernet port on the Q03UDE CPU, saying that we should instead use a standalone QJ71E71 Ethernet module. The QJ71E71 costs 1.5x the CPU module so there are significant savings in using the built-in Ethernet. They cited reliability issues but can anyone here back up their claim? We use our PLCs as simple I/O blocks - a PC runs a program which communicates with the PLC and tells it what outputs to fire. There is no actual ladder logic on the PLC. The PC connects directly to the PLC. I wrote a small C# utility that blasts the QX40 and QY80 input/output cards on my stack with random values and reads them back to ensure correct data transfer. The QJ71E71 Ethernet module averages 10 ms for a read or write operation and the Q03UDE averages 3 or 4 ms (much quicker!). So, does anyone have a reason to use the QJ71E71 port instead of the CPU? Thanks
  17. Failed to connect to the PLC

    Hi, I have suddenly got connection problems to my CJ2H-64EIP. PC is Win7 64bit pro. This combination has worked fine for 4 years, but now I can't connect by any means, tried direct online USB (Will sometimes connect, but CX-P crashes if PLC-program is uploaded - C++ runtime), Ethernet IP Node online, new project with Ethernet IP or USB. Communication to CX-Supervisor is also broken, so I suspect some kind of CX-Server problem. (Error "Invalid configuration: Marvin [CX-Server: MANAGER, INVALID_CONFIG, 0x822]). The PLC can be PINGed from this PC, and when I try to connect from another PC, everything is OK. I can also connect to a CS1G-43H with an ETN21 with no problems. Also tried to update CX-One to v 4.32. (CX-P v9.52) (first running the latest CX-Remover). The CXServer Driver management tool reports device driver v5.2 with my PLC listed. I have also tried to roll back some Windows updates, but the oldest restore point I could find did not help. Finally, when I try to load a program for this PLC from the disk, CX-Programmer crashes, same as above when uploading. Any ideas? Geir
  18. Submitting with an SLC

    Hello, At the plant I work at there are devices with IP addresses starting with 192.168.0, 192,168.1, and 193.168.2 The SLC in question is on 192.168.2 We would like to access it from our laptops which are on 192.168.0 The laptops have their subnet mask set to 255.255.252.0 and we are able to pull see other controllers on the 192.168.2 network. However, for some reason we can't with this one, not even when I'm plugged directly into the Ethernet port on the controller unless we change our IP address to one on 192.168.2 I believe the subnet mask on the controller isn't set right. Can anyone tell what I'm missing here? Here's an overview of the current settings: Laptop: 192.168.0.20, 255.255.252.0 Controller: 192.168.2.17, 255.255.252.0 Any help would be greatly appreciated. Ben
  19. Ethernet calbe

    Hello. This is the first time I use Ethernet in PLCs. I want to connect a Compactlogix L24 with remote I/Os and Panelview. I have many questions . But can you help me select the type of cable for this application , 2 or 4 pairs? shielded or unshielded?
  20. Hi All, I am not able to download control strategy on DesignerSim. It throws error - " Could not initialize comm to DesignerSim. Err = OPC Server Disconnected". Initially I was able to download strategy on DesignerSim. However, I started observing this error after I installed Wonderware software on the same system. So my system has GE WorkBench 8.4.0 and Wonderware 2014 installed on it. As per GE user guide, GE workbench is compatible with wonderware software. So, I am not sure what's going wrong with the set up which I have. I also tried to install these software on other system, and observed same issue. Does anyone know what could be potential reason for this error ? and How can I resolve it ? Thanks in advance.
  21. Schneider doesn't have the Sercos 3 interface out for the Altivar 32, and I'm going to use the Ethernet/IP interface until they do (not my choice). I found documentation on the CIP basic and CIP advanced control, and honestly, I will probably use one of those two, but I'm curious about the "Native" control, which seems sparsely documented. SoMachine Motion doesn't label any of the input/output words and it looks like you're supposed to custom select parameters that will be read/written using the drive's web server. Just wondering if anyone has an app note, bonus if it's explicitly for PacDrive3. Related, I'm a little fuzzy on explicit messaging with Ethernet/IP, but it seems that's what I'll need to do to setup the motor parameters and possibly to configure the "Native" control words. Any examples of that on PacDrive3 would be nice. I have a manual with the file name: ATV32_Modbus_TCP_EtherNet_IP_Manual_S1A28701_02.pdf that has been really helpful and may even answer all my questions, but it looses me in a few spots, such as how a parameter is addressed with explicit messaging.
  22. Hi All, I have problem about programming serial module Mitsubishi PLC using QJ71C24N. If I unconnect the cable from the module and connect again it show SIO error and the communication become lost or not sending data again. so i have to restart the PLC to make it normal again. Any other solution for solve this error without restart the PLC? Thanks Husanto
  23. Good day I have a scenario where I need to connect to Ethernet ST-lite units to an L-series PLC. With a Q-series you will use the Modbus card and create a Intellgent Function Module to do this and specify the header addressing for the unit. With the L-series, you have Modbus on the build-in Ethernet port, but how do I now setup and specify the addressing for the for the ST-lite unit? Please help...
  24. I'm new arround here so first of all greetings to all and apologies for my English. I tell you the case: I have a machine that has an Allen Bradley PLC 1756-L1 (yes, it's already a bit old) communicating with another plc, a B&R 2003, through the serial port. I wanted to download the program from AB. I open RS-Linx, I create a DF-1 driver and then click on autoconfigure. At this point I get an error saying RS-Linx can't find the communication parameters. I tried to connect with two other cpus 1756-L1 that I have (these are new so they don't have program) and the RS-Linx locates them perfectly. I guess the ab cpu has its serial port configured as USER to communicate with the B&R plc (or something similar), so my question is if there is a way to connect to this cpu through the serial port (such as putting the serial port in default mode without deleting the program) or the only option left is to find an ethernet card to connect to the cpu. Thank you very much for any answer because I've searched a lot and I don't find any information about this.
  25. Hi I need a little help please with networking through ST Lite. The scenario. I have a Q03UDECPU (Ethernet CPU) PLC which need to connect to STL-ETH1 (ST-Lite unit) unit and then also to the LAN for the MAPS SCADA to be able to read it. Now the STL-ETH unit has 2 network ports that I can use. However, I need to know if a daisy chain type of configuration will work. Basically LAN --> Port 1 on ST-lite and from Port 2 -- PLC and then back the same route. Is this possible? Reason for this is because I only have 1 network connection available from the LAN.