Search the Community
Showing results for tags ' comm. settings depending on hw used.) connect any mb client/master or server/slave device(s) to your clgx plc'.
Found 132 results
-
Dear Engineers, Please hep me to send and read data in ML1400 through rS485 communication. Regards, Prasanna +918970424843
-
Master & Slave configuration between 2 PLC Twido TWDLCAE40DRF
mugiwara_luffu posted a topic in Modicon / Telemecanique / Schneider Electric
I need solution for master & slave configuration between 2 PLC Twido TWDLCAE40DRF. My final project is about a system for filling drink on a cup and do the packaging. the component of the project is the filling system (dropping cup, filling water, pressing the seal) and the packing (packing into a box and sealing the box). This project is using 2 PLC Twido TWDLCAE40DRF. My problem is how to configure one of them as the master and the other as the slave. I've read the manual book but it's hard to understand the instruction. if anyone can give a simplify explaination to me please reply this post or you can reach me at mail: tatangprayoga11@gmail.com -
Hello I would like to connect 2 HMIGXU 5512 to my Modicon M221 is it possible please?
-
Hello guys, I got a used Omron VFD from a friend. It was used in an industrial application. It works fine with the integrated panel. I would like to use it to run my drill press. I now try to control it by the so called 3 wire sequence (S1, S2, S3) for Start, Stop and forward/reverse. System does not work as expected, i. e. no reaction on the switches. I'm not sure if I have messed up the configuration of one of the n xxx parameters or if there is a HW problem. With SC open, there is no voltage at that pin (expecting 24Volts?!). Any thoughts? regards and thanks, Matthias Current config: n001 = 4 n003 = 1 n004 = 0 n006 = F/R 052 = 0 n176 = rdy n177 = 1
-
Hello All, I am would like to know how to send a bit from an excel file to an omron PLC through CX-server in order to confirm that I have communication and the excel file is open. At the moment I am reading data from the PLC on the Excel file no problem but I don't know how to do it on the other way. I am attaching the code I have written and the excel file. So the idea is having a cell with a 1 and reading this value as a bit ON on the PLC. Thank you very much in advance I really appreciate it. :)
-
Hello All, I am having some issues with Excel while communicating with the Omron PLC. The Excel file is getting the data from the PLC and the macro doing what I want to do, but I am getting the following error messages when opening the excel file. I am attaching the pictures of the messages and the code where debug send me. Thank you very much in advance
-
Version 2.0.2
812 downloads
free HMI/SCADA program WebN Server 2.0 (freeware) * manual & program download site : http://www.netran.co.kr * Web-N Server 2.0 (freeware) - PLC interface demo video : https://youtu.be/MuOFMwK7Qqs* Android phone app download : https://play.google.com/store/apps/deta ... .en2&hl=en- Windows 7/8/8.1/10 x64, .NET frameworks 4.6 over - Mult-Language (tool language, view page language) - PC monitor, Web browser monitor, Smartphone monitor - (Design once and monitor on multiple instruments) Unlimited number of tags Unlimited monitoring time 1,024 concurrent connections Unlimited upgrade Unlimited connection of equipment (PLC, DCS, DDC ..) Unlimited app push message No Software fee No installation cost No registration fee No license fee No cost to use No upgrade cost Free Redistributable -
[Free Utilities] - freeware HMI SCADA program Web-N Server 2.0
webn posted a topic in Download Comments
free HMI/SCADA program Web-N Server2.0 (freeware) View File Program download site : http://www.netran.co.kr Web-N Server 2.0 - video for PLC interface demo : https://youtu.be/MuOFMwK7Qqs - Windows 7/8/8.1/10 x64, .NET frameworks 4.6 over - Mult-Language (tool language, view page language) - PC monitor, Web browser monitor, Smartphone monitor (Design once and monitor on multiple instruments) Unlimited number of tags Unlimited monitoring time 1,024 concurrent connections Unlimited upgrade Unlimited connection of equipment (PLC, DCS, DDC ..) Unlimited app push message No Software fee No installation cost No registration fee No license fee No cost to use No upgrade cost Free Redistributable =============================================== Submitter webn Submitted 08/29/17 Category Free Utilities -
Wanting to write to Balluff Smart Lights via IO Link Master IP #BNI EIP-502-105-Z015. I can find lots of literature on setting up the communication via E/IP in RSLogix 5000 but haven't located anything with Machine edition for writing the data over IP. I am utilizing an Rx3i platform with IC695CPU315 and IC695ETM001 for network access
-
How to connect More than one Omron Cj2m Cpu Plc in a same network
KCRP posted a topic in CX-Programmer
Hi, I am doing a project with three Omron Cj2m cpu. I dont know how to connect More than one Omron Cj2m Cpu Plc in a same network to communicate each other with a Internal Memory addresses. Can any one help me to understand? -
I have been tasked with pointing our FT View application to a remote SQL server for all data logging. I'm having some issues getting this to happen. I've configured everything I can find in our test environment, but FT View still points to the local SQL Server instance. There must be a setting I'm missing. For instance, when i go to Tools -> Diagnostics Setup -> Destination Setup -> ODBC Database, and I point to the system DSN I've created pointing to the remote server (and even enter the correct remote credentials), when i create a table, it goes to the local sql server instance... I've restarted multiple times. Any direction would be appreciated.
-
Hi Has anyone got any real life experience with the new Mitsubishi iQ-R series? I have been assigned a major capital project to replace our old ageing DCS system. Our current PLC backbone is about 40x Q2ASHCPU, 10x Q06UDEHCPU and about 2xA2SCPU all linked up via Melsecnet/10 network with communication links into the DCS system via Modbus RTU utilising the QJ71MB91 modbus card. Due to the nature of my companies process and the limitations on plant downtime it is estimated this project could take up to 5 years to complete, with this in mind I am wanting to install a system that will not be obsolete (or unsupported) in a few years, hence, I am very interested in the new iQ-R series with it being Mitsubishi's latest and greatest. However, recent communications with my local Mitsi rep is not filling me with confidence that the iQ-R series is not as well supported/developed as the Q series. A major requirement during the development stages of this project is the new ability of the new processors to be able to talk to the old DCS up until a point where the DCS nodes will be completed removed and replaced with a modern SCADA package. Hence, the requirement of a Modbus Slave card for the iQ-R (i.e. a QJ71MB91 equivalent) which I am told is in development, but has no fixed timescales. Previous experience with Mitsubishi developments of cards is normally years not months. Any information anyone can provide on their experience of the iQ-R series would be greatly appreciated and if anyone knows if a Modbus Slave card is in development that would be useful. I realise i could utilise the Q series extension rack with a iQ-R processor but this is not the route i want to go down. Thanks for any help and apologises for the war and peace. Cheers Matt
-
In general, this control PLC program is written in GX Works. I did a simple visualization on TIA Portal v14 (WinCC RT Advanced) and I would like to now test it on Mitsubishi FX3U driver with ENET Module. I do not have much experience in this kind of thing, I'm still learning. I know that someone previously made a visualization in LabView and downloaded the tags from the PLC using NI OPC Server. Someone also did visualization in iFix and also downloaded tags through server opc. I do not know just how or what program to download tags in PLC so that I can no longer use it in visualization in TIA Portal. Unfortunately I still have a connection problem. The driver is connected to the router. From the connection options with RT Advanced I chose in the connections tab Mitsubishi and entered the appropriate IP. Still nothing. I do not know if the lack of a connection can be related to a virtual machine (VM Vare Workstation 12) on which I have TIA Portal installed. The driver pings but can not connect. I also tried using KEPServer EX to connect and unfortunately also failed. (I have information about the can not connect). Anyone know what program I should use? or had contact with such a problem? I attach a photo of communication from my station to more visualize the problem. Thanks
-
hello Friends how can I Connect FX5U by direct RJ45 to download program on it and the type of cable should be cross cable or straight cable Thanks .
-
Hi, I’m trying to control 10 Safety switchgear using AS interface, and since I’m using Beckhoff as a PLC I want to use "KL6211 | AS-Interface master terminal" as a Gateway but since this is the first time I’m using Beckhoff I’m a bit lost, So my questions are: - Is it a good idea to use a Beckhoff ASI terminal? - How to configure it? - Is there a possibility to configure it using embedded PC ( I’m using CX2030)? Excuse my English.
-
Hi guys, I'm playing around with a PT100 temperature reading module (AJ65SBT2B-64RD3 ) and I came across something strange. I took the example program written in the manual and copied it exactly. It works but now I figured that some of it is not needed maybe and some is not clear what it is used for. Can someone explain what exactly do these two values are in the settings? I'm using all 4CH of the module so maybe I need to change something or I can just delete it if it's useless in my application. (I read the temperature in a room and turn on or off a IR Lamp depending on that temperature). Thanks, Andrei
-
Visu+ SCADA Query timeout exceeded on SQL Server 2014
Bruna Pozzato Tavares posted a topic in Other PLCs
I have an application in the Visu+ Scada System, from Phoenix Contact, which makes a query in the SQL Server 2014 database. While the database was empty, queries were made perfectly, after 4 months the database grew up absurdly and then stopped running the query, returning the following error: Query timeout exceeded. I have a general table with 210 variables being written every 20 seconds. The query is made by updating the parameters in another single row table, it generates a trigger that copies the requested query to a third table and it is plotted on a chart in the supervisory system. The error occurs when Visu+ sends the parameters to be updated in the second table, returning "Query timeout exceeded.". However, when I update directly through SQL Server, it updates, generates the trigger and performs the requested query. Could someone help me solve this timeout problem, please? Thank you very much in advance!! -
Hi, I was wondering if anyone have experience with Tia Portal Step7 v.14 and Step7 Classic v.5.5 located on a remote server? We have several persons working on our PLC's. As it is they all have their own PC with Step7 + licenses. We were thinking about moving the software environment onto a server to reduce license and maintenance costs. Does anyone else have this setup? If yes do you have any tips or comments? Pros/cons? I already know now that you cannot autodetect/configure new devices from a remote server as the Step7 detection protocol doesn't work through a router. We can live with that. We need both TIA Portal and the Step7 Classic on the same server. Thanks
-
I want to make a setup of one Ifix 5.5 server and one Ifix 5.5 client for testing purpose. This is for doing some alarms and events testing at the client( Operator Workstation) end. My question is that is it possible to do this setup without a valid license. Is it possible to establish the connection between server and client without license..? Regards Eby
-
Hello guys, I am using Fatek PLC's to communicate with each other as a Master & Slave through zigbee which is connected through RS485. And I succeed. But the issue is that I have to communicate each other at a distance of about 2km where zigbee out of range to each other. I am bit confused here; 1) whether I use RF booster? Does it work? 2) Should I introduce extra PLC as a repeater between master slave? But this(extra added) PLC repeater also become as a master(Master Repeater).or any idea? Most important I can using Fatek Protocol or Modbus RTU or Modbus ASCII prootcol.
-
Hi I have 2 fx2n 64MR/MT plc I can connect to one of them without any problem but other one the PROG_E LED is flashing and I cannot connect to it for programming and dowanload my backup to it , its error is aboat cpu type or cable. the battery of this cpu disconnected for 10 days. pay attention that I can connect to other CPU same as it(I said at first). thanks every boady
-
-
How to read korea plc master k 250 since it can not read by using KGwin software .thanks
-
I am Facing Problem Getting Kwh Readings From My Satec MFM(PM130-PLUS), Required for an easy & reliable Monitoring On Energy Consumption . Connected via RTU Slave Interface with SCADA User Interface (GE_Cimplicity). Here's what happening : Actual Kwh Reading has 8_decimal data digits on MFM LED Display but on Cimplicity SCADA User Interface Screen It only able to Display it as 4_Decimals point digit, eg, 63290058 kwh shows as 0058 , and 15299999 kwh shows as 9999 , and then 15300001 kwh shows as 0001 i.e 1 only! Plz Do a Rply , your slight approach to my Query Will be highly Appreciated!! :)
-
HI Everyone, Recently i have bought a plc fx3ge and gt2000 hmi .the problem is that whenever i use a device address d280.b1 in hmi .i am not able to use the same address in gx works for plc (LD D280.1).can anyone help me with this problem.
