javiermorales

At the hardware level, they are similar, the difference is in software that will have to be connected to contact to migrate it.

Hello colleagues, I leave you a link from Amazon, where I leave you Mitsubishi PLC clones at a low price, ideal for doing small tests at home level FTVOGUE DC24V FX1N-14MR Placa de... https://www.amazon.es/dp/B07NPPX356?ref=ppx_pop_mob_ap_share   best regards

colleagues, here I leave you an offline configured for the Q system greetings http://forums.mrplc.com/index.php?/files/file/1160-q-selection-tool/

Q selection tool View File Q_PLC_offline_termékkiválasztó_szoftver_-_MELSEC_Q_Series_Selection_Tool.zip Submitter javiermorales Submitted 04/18/20 Category Demo Software

hello I leave you the euro protocol more. with digital inputs and outputs both security and control. best regards EU_67_Ver_1.11_May2015.pdf

hello, you have to download the ethernet ip configuration tool software, once you have it installed there you can put the equipment best regards

The only purpose is that the variables you declare can be used in both safety and control program.Greetings

Hello colleagues, I comment.I have left an iq-r selection tool for the offline version.It comes very useful when you don't have internet.   http://forums.mrplc.com/index.php?/files/file/1157-iq-r-selection-tool/

IQ-R SELECTION TOOL View File IQ-R selection tool offline version Submitter javiermorales Submitted 02/10/20 Category Demo Software

Hi, what model is it, and how are you communicating with it?Greetings.

hello to use the variables you have to do the safety table, I attached an image of the three tables, shared safety, no safety, and only safety so I could see the table that is putting the safey entry, it is a non-safety table

hello thanks for the clarification I will try to look at this part to be able to make it independent.  Greetings and thank you

Hello, if the melsecnet model is associated with the r04, but I think that as both the r04 and the r120 have to have the same hardware in their programs, and these in turn are housed in the same rack, I think that is where the  problem, my intention is to see how I can do it to have it and to be able to communicate, since I am currently working without the expansion rack so that it does not incompatibility.  thanks