joansm

MrPLC Member
  • Content count

    12
  • Joined

  • Last visited

Community Reputation

0 Neutral

About joansm

  • Rank
    Sparky

Profile Information

  • Country Brazil
  1. DELTA DVP-14SS2 Mosbus rtu rs485 Slave mode

      I was able to communicate in RTU HEX Address mode with the Arduino, placing the D0 address as 4096 and so on, thanks for the help
  2. DELTA DVP-14SS2 Mosbus rtu rs485 Slave mode

    Thanks for the answer, i preffer the HEX Address mode because i gonna comunicate this PLC with an HMI from the another Company (arduino too), i want to use the generic Modbus RTU communication  
  3. DELTA DVP-14SS2 Mosbus rtu rs485 Slave mode

    Follow the img links: DELTA PLC CODE:    DELTA HMI CODE: DELTA HMI CODE PT 2:   HMI AND PLC CONNECTION:  DELTA HMI ERROR MESSAGE: 
  4. DELTA DVP-14SS2 Mosbus rtu rs485 Slave mode

    Thanks for the fast answer, do you have an telegram, whatsapp or email? Its for me send photos of the devices and the configuration screen, in this site an error message shows   Thanks for help
  5. DELTA DVP-14SS2 Mosbus rtu rs485 Slave mode

    Hello and thanks for the answer  I made the code you suggested using WPLSoft and I still haven't been able to communicate, I'm also using HMI Delta, however I want to use generic modbus communication (Modbus RTU Hex Address Master on IHM) , and not using PLC LINK I cant upload photos in this site, an error message shows   Thanks for help
  6. DELTA DVP-14SS2 Mosbus rtu rs485 Slave mode

    Hello and thanks for the answer I'm using the ISPsoft   The master device its an arduino, or an IHM 
  7. Hello, someone know how to configure this PLC (DELTA DVP-14SS2) In the COM2 modbus RTU 485 baud rate 9600 8E1 slave mode (Not the plc Link)? Master mode i already know Thanks for help      
  8. Hello guys I am a beginner in FINS UDP communication and I am trying to do a FINS UDP communication between an omron PLC CP1L-E in client mode to communicate with my PC that is in server mode, I am using the SocketTest v3.0.0 program that is in listening mode and still was unable to receive any information from the CLP, can you help me? The program and some images of the simulation are attached Thanks for reading SERVER PC IP ADDRESS 192.168.15.160 CLIENT PLC IP ADDRESS 192.168.15.10   tcp socket (1).cxp
  9. Hello guys I am a beginner in FINS TCP communication and I am trying to do a FINS TCP communication between an omron PLC CP1L-E in client mode to communicate with my PC that is in server mode, I am using the SocketTest v3.0.0 program that is in listening mode and still was unable to receive any information from the CLP, can you help me? The program and some images of the simulation are attached Thanks for reading SERVER PC IP ADDRESS 192.168.15.160 CLIENT PLC IP ADDRESS 192.168.15.10 tcp socket_vms.cxp
  10. Hello

    I am a beginner in FINS TCP communication and I am trying to do a FINS TCP communication between an omron PLC CP1L-E in client mode to communicate with my PC that is in server mode, I am using the SocketTest v3.0.0 software that is in listening mode and still was unable to receive any information from the CLP, can you help me? Thanks for reading

    SERVER PC IP ADDRESS 192.168.15.160

    CLIENT PLC IP ADDRESS
    192.168.15.10

     

     

    server (2).bmp

    ladder.png

    sockettest.png

    tcp socket_vms.cxp

  11. Good Morning I am a beginner in PLC programming using the Sysmac Studio software and please help me if you can  I'm trying to make an omron NX1P2 PLC read some message via Socket UDP to my PC through the Socket Test program, do you have or know any program with an example application in ladder? thank you
  12. Socket UDP Send not working

    Good Morning I am a beginner in PLC programming using the Sysmac Studio software and please help me if you can  I'm trying to make an omron NX1P2 PLC read some message via Socket UDP to my PC through the Socket Test program, do you have or know any program with an example application in ladder? thank you  
  13. Good Morning I am a beginner in PLC programming using the Sysmac Studio software and please help me if you can :-D I'm trying to make an omron NX1P2 PLC read some message via Socket UDP to my PC through the Socket Test program, do you have or know any program with an example application in ladder? thank you

    1. Michael Walsh

      Michael Walsh

      Ok, I cannot attach any files to the site as it is having some technical issues.  I have however placed them on a site for you to download.  Check this out:

      https://omca.box.com/s/w7f8dg5t0quan86ud6xzrwwgjy1ish7j

  14. Good Morning I am a beginner in PLC programming using the Sysmac Studio software and I believe you can help me with any doubts, I am trying to make an omron NX1P2 PLC send some message via Socket UDP to my PC through the Socket Test program result yet, do you have or know any program with an example application? thank you

    1. Michael Walsh

      Michael Walsh

      I was going to suggest that you make a forum post on this.  I do not have any code.  I will look around and if I find something, I will reply to your post.  There is a problem with the website and attachments cannot be made right now. 

  15. Socket UDP Send not working

    Hello people I'm trying to send data via UTP socket in the SocketTest program, but I haven't been successful yet, below is an image of error 0400 on the send FB can someone help me with an application example using FB send UTP sending any data and I monitoring this data in any software such socketest for example?   Thanks for read and help