akbar_torkashwand
MrPLC Member-
Content count
13 -
Joined
-
Last visited
Posts posted by akbar_torkashwand
-
-
Hello Ron_S. I don't understand what you say. please tell me more
-
If I disable check terminal version in the tranfser settings and upload program with higher version . is it possible to download on it in the future. ?
-
On 3/31/2023 at 11:53 PM, akbar_torkashwand said:I have made it many time. but result is same. at the end. I decided to provide real serial port with real windows XP and test.
On 3/31/2023 at 11:53 PM, akbar_torkashwand said:I have made it many time. but result is same. at the end. I decided to provide real serial port with real windows XP and test.
Now I can connect with E100 with real windows xp and real serial port.but E100 is V4.03 and my software has only V6.0. so I couldn't upload program. I have E-Designer v7.50. where can I download older version?
-
13 hours ago, Ron_S said:You start at the beginning.
Check your pc has a usb to serial port showing - and what com port number it is.
If you do, open a blank E100 project and go to Transfer. select Recieve and set the Com port to the same number.
I have made it many time. but result is same. at the end. I decided to provide real serial port with real windows XP and test.
13 hours ago, Ron_S said: -
On 3/30/2023 at 0:25 AM, Goran Vuckovic said:With Beijer, often is problem with driver. If you have different driver installed on HMI than with E-Designer it often makes problem.
Yes .I chose correct driver in empty program.
-
3 hours ago, pturmel said:If the USB->Serial converter doesn't have an FTDI chipset, expect problems.
how can I found my USB to SERIAL cable have " FTDI chipset "?
-
Time out Error.
-
yes. CAB5 is connected in right way.but I couldn't upload program.
-
hello every body.
I want to upload program from E100 HMI Beijer.
I have " E - Designer " software and CAB5 programing cable.
I tried with USB to serial cable and windose XP virtual.But I couldn't connect .
can anybody help me? -
-
-
hello every body.
I want to upload program from HMIGXU3500 . I have Vijeo Designer Basic v1.0 software
Is it possible to upload program from this HMI.? I want to have back up file
PLC5 with Delta DOP HMI
in Allen Bradley / Rockwell Automation
Posted
hello. did you solve your problem. I want to connect PLC5 with Delta DOP HMI via ethernet or serial.
Thanks