caky
MrPLC Member-
Content count
5 -
Joined
-
Last visited
Posts posted by caky
-
-
Hi,
I need a help,
I made PID temperature regulator in GX Works3 FBD/LD program.
I don't know how to write my paramerers. Amount of Proportional gain and Integral time are P= 0.072 and Ti=144.82s, dont use KD. ) In manual for Kp writes setting range is 1 to 32767 (%) and I dont' know how ti write my value. What meant this precentage. For Ti Setting range is 0 to 32767 (x100 ms), here I need writes my time in ms?please help !!!
-
Hi,
I realy need a help, I am stuck.
I need to make PID temperature regulation for Mitsubishi plc fx5u in GX Works3 FBD/LD program. I don't have any modul fo temperature sensor. I use NTC resistor connected to AD. I use PID function block. I made almost all program but I don't understand two things:
1. How to input my paramerers ( Before I made matlab simulatiom of proces and I got the paramerers, Proportional gain and Integral time. problem is my P= 0.072 and ma Ti=144.82s, dont use KD. ) In manual writes;s etting range is 1 to 32767 (%) and I dont now how ti writ my value. What meant this precentage. For Ti Setting range is 0 to 32767 (x100 ms), here I need writes my time in ms?
2. I don't now how to connected my output of PID (MV) to turn on and off heater. Can I use PWM function? Or i need to use high speed timer?Can it make like I started or need to change all conncept?
please help me!!!!
-
Hi,
I'm new here realy need a help, I am stuck.
I need to make PID temperature regulation of heat chamber ( for my school work), using Mitsubishi plc fx5u in GX Works3 FBD/LD program. I don't have any modul of temperature sensor. I use NTC resistor connected to AD. I use PID function block, I made almost all program but , don't understand two things:
1. How to input my paramerers ( Before I made matlab simulatiom of proces and I got the paramerers, Proportional gain and Integral time. Problem is my Kp= 0.072 and my Ti=144.82s, dont use KD. ) In manual writes: setting range is 1 to 32767 (%) and I dont now how ti write my value. What meant this precentage. For Ti Setting range is 0 to 32767 (x100 ms), here I need writes my time in ms?
2. I don't now how to connected my output of PID (MV) to turn on and off heater. Can I use PWM function? Or i need to use high speed timer? How to make it?Can it make like I started or need to change all conncept?
please help me!!!!
GX Works 3 parameters
in Mitsubishi
Posted
I use FX5-5u plc