Matthew2019

Mention on the cabel sticker Omron C200H-CN222, come together with PR027 programming console. 

Thanks for the answers, i already contact local Omron rep asking for help.  I can get  one Omron CPM1A cpu with a peripheral cable,  i found the following adapter on internet for 40 euro. OMRON CPM1 - CIF01 RS-232C ADAPTER INTERFACE UNIT thanks 

I don't think i have same version as you have, see attached screen shot    

Hello, i am learning PLC programming with OMRON syswin 3.4 and before purchase cables i need to know if that works with Omron  CQM1 CPU45-V1 i read in manuals that i will be able but when i made new project in Syswin i can't see CQM1 in drop menu.  thanks in advance

Thanks guys  

So an always on bit with a DIFU and bellow the difu contact with move. and how to determine the range? On move i can only have the source and one destination memory right? the source then it will be 4mA? >> 0 ? Thanks 

Whats hold me is the following, how to i program the analog input to a move  in combination with other instruction? is that possible?  I dont want to use SCL . Thanks in advance

Thanks for your advice, but i would like to do it with math and use move and divide instructions. my range is -20 celcius to 100 celsius, 0 to 9999 , 4-20mA. i have then 9999 / 120 cenlsius = 83 per 1 celsius.  Thanks in advance  

Hello gents, I am learning PLC programming with Omron Syswin 3.4 software and i use for this project Omron CPM2 CPU. Someone can explain  how to program in ladder diagram a analog input with range 4mA = 0 and 9999 = 20mA. I want to storage the value in a DM1010 for example. Thanks in advance.