PLCNOOB24

Perfect thank you

Thank you for that.As for the files rev in there can I use any of them or I need a specific one. There is 2.7 2.8 2.9

I've actually never worked with Sysmac studio so i'm pretty stuck ahah. Also how do I get an eds file ? im using DriveStudio for the drive parameters

I realised that and changed my PLC to a NX1P2-9024DT1 PLC. I'm trying to figure it out with this one now. Thank you for the precision michael. Also changed from CX-Programmer to sysmac studio for that new PLC

I will try that. Thank you for your answer  

I've set the drive for ethernet as a FBA TYPE communication, its passing by the ethernet adaptor FENA-11 to establish communication on a switch connection drive, plc and pc together

Sorry im not sure what you mean here... my plc is a CP1H-X40DT1-D if that is what you are asking. using a card CP1W-EIP61

Good morning, Like stated in the title, I have to communicate to an ABB ACSM1 drive using a FENA-11 with an omron PLC CP1H using only ethernet. No IO are to be used for the communication. I've been searchigng for a while now and dont seem to be able to do any communication. Anyone's ever setup this type of communication? they both have ethernet correctly set up so thats not the issue. Sorry if its a beginner question I am pretty new to PLC programming as im a university student doing internship. Thank you for your help