rock0

Hello! I need help how is easy way to read real velocitiy from analog input with potentiometer. I have CJ2M CPU and CJ1W-MAD42 analog module. Best Regards!

solved with FB

no I dont have any trouble with wiring,configuring and scaling. I need read velocitiy in mm per second range is about 500mm stroke range

Hey guys! What is best way to save cycle statistic? I want to save last 500 cycles, each cycle data is 16 word length. I have CJ2M-Cpu32 and NB10 HMI. Best Regards

Have anyone prepared FB with PID for ramp programming? I have CJ1G-CPU42H PLC example this ramp: ramp.xls

Can I connect one Pt100 sensor to two input on TC101 module? Because I need two loops for reverse operation (heating) and one loop for forward operation (cooling) and inside mould I have only two Pt100 sensors. One is need only for heating Any solution please. Best Regards

Great solution Geir :) I try this Thank you

amd how I do this? I cant write one PV to another PV

Thank you, this help me. Best Regards

Does anyone have manual for old omron AD conversion board SYS-AD16-0EE-I ? Thanks

Here is R,S - AC power input 220 VAC U,V,W - inverter output STF - forward rotation start STR - reverse rotation start SD - input common

I need this : when go input 0.00 ON send value from DM600 to exel to exel cell A1. Next time when is 0.00 ON send value from DM600 to cell A2. How I can to do this. I have CX-programmer 4.0 and CX server 2.1. sorry for my bad english.

thanks for your support

I need manual for cqm1-ad042 analog input module. I dont know how to set dip swich inside. Thank you

Here is one free online plc book: Introduction to PLC controllers link: http://www.mikroelektronika.co.yu/english/...ook/plcbook.htm

I have measure instrument with LPT port for conecting HP printer series 600. I want to receive data on PC, not in the printer (PC are instaled in machine – near the measure instrument). These instrument are instaled in production line in full wood dust – powder atmosphere. On the PC I have free parallel and USB port. I need driver for capture data from LPT port from instrument to PC. If you can help me, please send me informations. Thank You

Tnx Jay I try this tomorow.

How I can scan time, how many milisecond one input is active in each cycle with CQM1 PLC? Tnx for advance

I want count the time how many milisecond is input 0.00 is ON. This information I need for timer value in next cycle of program. tnx

I have problem with one cqm1h cpu11 plc. Program is password protected, I try unprotect with one password finder for omron plcs, this program working good with omron cqm1 plc but with cqm1h series not working. If you have any idea how to unprotect program please help me. Best Regards!

Tnx for your answer ElctriclCncepts. There is a problem with a person who made program for this machine, he is inaccessible. Tell me please which number of address in DM memory I must change. Because machine not working well and we must repair this program. Thank you!