Anthony0307

MrPLC Member
  • Content count

    15
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Anthony0307

  • Rank
    Sparky

Profile Information

  • Country United States
  1. ETH-1 Ethernet Protocol

    Thank you guys!!!! I got it...
  2. ETH-1 Ethernet Protocol

    ETH-1 is active in RSlinx but the RSLogix5k shows Path AB DF1
  3. ETH-1 Ethernet Protocol

    Hi Folks, I need to change the Communication protocol from DF1 to ETH-1 Ethernet in a RSLogix5000 program. Any idea how this is done. Thanks Anthony
  4. ETH-1 Ethernet Protocol

    Hi Folks, I need to change the Communication protocol from DF1 to ETH-1 Ethernet in a RSLogix5000 program. Any idea how this is done. Thanks Anthony
  5. CompactLogix L35E

    Need to change the path from DF1 to ETH-1 Ethernet. Any idea. Please look at attached pictures.
  6. CompactLogix L35E

    I got it!!! Thanks to everybody. But I'm having problem going Online. I need to change the Path from DF1 to ETH-1 Protocol. Any idea how this is done? Thanks, Anthony!!!
  7. CompactLogix L35E

    Can someone help me on this, please. Thanks! Anthony
  8. CompactLogix L35E

    Hi Folks, Here are the steps I'm using trying to communicate via Ethernet; As I explained before, this is an old CompactLogix 1769-35-L35E that was removed from a working machine. I'm able to communicate using the serial port but I have not success using ETH1-Ethernet. On the Controller, Tree I click on the Controller Ethernet card then properties and type in the IP I want to use, 192.168.1.10, my Computer IP is 192.168.1.6. Then I opened RSLinx , on the Host window I type again 192.168.1.10 but RSLinx is not recognizing this IP. Then I tried to Ping 192.168.1.10 but the destination Host is unreachable. Please look at the sequent below. Thanks in advance for all your help. Anthony
  9. CompactLogix L35E

    Hi Folks, Can someone help me with this topic, please. Any help would be highly appreciated. Thanks Anthony  
  10. CompactLogix L35E

    Hi Daniel, Thank you for your help. I'm still having problems communicating with the controller via Ethernet. This is what I did; I opened RSLinx, configured DF1 driver and established communication via RS-232. From the Controller tree, I changed the IP address from 10.10.50.131 to 192.168.1.10, my computer address is 192.168.1.6. I deleted the DF1 driver and configured Ethernet devices driver, then I added the controller IP on the Host name but the RSLinx is giving me Unrecognized Device. I also used BOOTP-DHCP and ping the Controller IP with the same result. is there something I've been missing? I appreciate your help on this topic. Regards, Anthony
  11. CompactLogix L35E

    Hi Daniel, I opened the RSLinx Classic, selected the CPU/Ethernet Module and the the current IP Address is 10.10.50.131, and my Computer IP Address is 192.168.1.6, subnet 255.255.255. 0 but I still can't communicate. Any help would be appreciated. Thanks, Anthony
  12. CompactLogix L35E

    Hi folks, I'm trying to communicate with an old CompactLogix L35E via Ethernet. I have already establish communication via DF1 Serial port and was able to go online but I Do not know the IP address to communicate via Ethernet. Can someone please tell me how I could determine the IP Address or create a new one ? This Controller was remove from a working machine. Any help will be highly appreciated. Thanks, Anthony.  
  13. CompactLogix

    Hi Daniel, Thank you for the quick response. I was able to communicate using serial port USB-SR232 cable but I would like to communicate via Ethernet. The processor is blank, no original machine program and I do not know the subnet range on the processor.  Best regards, Anthony
  14. CompactLogix Communication

    Hi Folks, I'm trying to establish communication with a CompactLogix L35E. I removed this processor from an used machine and I do not know the IP address. My Computer IP is 192.168.1.5. How can I establish communication? Any help will be highly appreciated. Thanks, Anthony
  15. CompactLogix

    Hi Folks, I'm trying to establish communication with a CompactLogix L35E. I removed this processor from an used machine and I do not know the IP address. My Computer IP is 192.168.1.5. How can I establish communication? Any help will be highly appreciated. Thanks, Anthony