I am programming a system that has an OMRON CJ2M-CPU35 PLC and an NS10TV01B-V2 HMI. The CX-Programmer and CX-Designer software are on a VM I am using. I am not able to download to either the PLC or the HMI via an ethernet connection. My Host adapter is set at 192.168.250.20, PLC is set at 192.168.250.1network 1 node 2 on the dial pots, HMI is set at 192.168.250.2 network 1 node 2. The VM adapter is set for DHCP and NAT in the VM settings. I can Ping both the PLC and the HMI successfully from the command prompt on the VM, so I think the path is good. I can also go on the internet from the VM OS. In CX-Designer for the HMI, PT transfer settings are FINS network 1 node 2, the IP address is set to 192.168.250.2. In CX-Programmer the PLC I/O transfer settings are 192.168.250.1. in the I/O table the IP address is set as well as the FINS/UDP is set to IP address conversion. I could use some help with changing the Work on-line from Ethernet IP to USB and back again. I haven't found that in any of the manuals how to do that. Step by step. I don't have a lot of experience with OMRON because they are not our preferred control system. Thank you in advance for your help.
