Ramadan

MrPLC Member
  • Content count

    26
  • Joined

  • Last visited

Everything posted by Ramadan

  1. Plc7-3

    Dear sir        Thank you for reply. Thank you for interest.    Thanks  best regards  eng / ramadan 
  2. Dear  Do you have a software developer work in xp to upload program from plc tsx 407 .   Best regards  Eng / R
  3. Dear sir        Thank you for reply. Thank you for interest .      Thanks  best regards  eng / ramadan 
  4. Dear sir         Please help me. I want to upload program from monitor maglies xbt h011010.I have software program xbtl1000.but I have not driver unitlway xp. The computer working under Windows xp sp2 or sp3.   Thanks  best regards  eng / ramadan 
  5. Dear sir        Thank you for reply. Thank you for interest. Do you have a software developer work in xp to upload program from plc tsx 407 
  6. Dear sir        Thank you for reply. Thank you for interest. Do you have a software developer work in xp to upload program from plc.
  7. Dear sir           I have plc tsx 407 .I want to upload program can you help me to send me the driver working under xp.because the software plc7-3 working under os/2 and I have a problem in old laptop.    Thanks  best regards 
  8. Dear sir         Please help me. I want to upload program from monitor maglies XBT-H11010. I am setup program software XBTL 1000 in the computer under Windows XP (sp3 ).I'm used cable xbtz915 between monitor and computer. I am setup the driver unitlway. but when I try to upload program gives the driver not access the communication.    Thanks  best regards 
  9. Dear sir            Please help me. I have monitor maglies xbt-ho11010 .I want to upload program from monitor but I want suitable program software. Vijeo program is suitable  ?.If yes please send me the link to download program.    Thanks  best regards  eng / ramadan 
  10. Dear sir            Please help me. I have monitor maglies xbt-ho11010 .I want to upload program from monitor but I want suitable program software. Vijeo program is suitable  ?.If yes please send me the link to download program.    Thanks  best regards  eng / ramadan 
  11. Dear sir          Thank you very much. I'm sorry but I want any personal to help me.    Thanks 
  12. Dear sir         Please help me. I want to upload program from monitor maglies XBT-H11010. I am setup program software XBTL 1000 in the computer under Windows XP (sp3 ).I'm used cable xbtz915 between monitor and computer. I am setup the driver unitlway. but when I try to upload program gives the driver not access the communication.    Thanks  best regards 
  13. Dear sir  Thank you for interest.the drives atv66 are working good in the network but the atv66 is absolutely so we were replaced atv66 by atv71.  But all drives atv71 in the network fipo bus are the same problem. The drives are working in open loop not used encoder .
  14. Dear sir       Please help me.  I have altvar 71 connect in plc telemqunica plc 7-3 under network fipo bus. The drive is working good but I have two problem  1-the drive some time random the speed is decrease and increase overshoot  2-the drive not stop breaking when press process stop switch but stop freewheel  (the break resistance is connected )  
  15. Simple programming cable for Mitsubishi FX

    Dear sir     thank you for interest .thank you very very much 
  16. Simple programming cable for Mitsubishi FX

    Dear sir     thank you for interest but the plc  fx-32mt is contain soket 25 pin female not  contain in the attach photo so the cable is between 25 pin female and dp 9 male such as drawing in attache file  please send me the suitable wiring cable connection  cable.bmp
  17. Simple programming cable for Mitsubishi FX

    Dear sir     thank you for interest but the soket in plc contain 25 pin so the sc-09 cable not used in this plc .please send me the suitable cable beteen plc fx-32mt (25 pin) and laptop (dp 9 pin)
  18. Dear sir       please send me the software (XBTL1000) TO Upload program for monitor Magelis 
  19. Simple programming cable for Mitsubishi FX

    Dear sir        thank you for interest , please see photo I make direct cable between plc and laptop but not connect why?
  20. Dear sir       Please help me.  I have altvar 71 connect in plc telemqunica plc 7-3 under network fipo bus. The drive is working good but I have two problem  1-the drive some time random the speed is decrease and increase overshoot  2-the drive not stop breaking when press process stop switch but stop freewheel  (the break resistance is connected )
  21. Simple programming cable for Mitsubishi FX

    Dear sir         thank you very much .the FX-232AW contain two parall port one from plc and other in the personal computer but not contain db9 port so i f I want used laptop computer which contain db9 port what is the solving.
  22. Simple programming cable for Mitsubishi FX

    thank you very much
  23. Simple programming cable for Mitsubishi FX

    Dear sir       thank you for reply.thank you for wiring cable .but contain FX-232AW this function can be make ?if you can please send me the wiring for it.     thanks best regards  
  24. Simple programming cable for Mitsubishi FX

    Dear sir        Thank you for interest. but I don't receive any post for drawing the wiring 
  25. Simple programming cable for Mitsubishi FX

    Dear sir         Please send me the wiring diagram between pc  (dp 9 )and plc melsec FX32MT  (25 pin soket  ) and the suitable program software used.