abdullah eraslan

what is the difference between pto and pwm?

hi all in tia portal under the basic instructions there is legacy.legacy includes  drum, dcat, mcat,imc blocks.in manuel i read but I could not understand the purpose of use.Is there anyone to explain these bloks to me?

r62p power source r08cpu  r16mtcpu ry40pt5p digital output rx40c7 digital input r60ad4 adc unit What is the wrong thing?

time delay interrrupt and hardware interrupt

  I'm not asking how the jump function works. I'm telling you that jump with the subroutine program is similar. I'm telling you that the function is similar to the subroutine program. Why should I use subprograms from the inside?you dont understand me

dear gambit  in manuel I found how to use subroutine programme.But  I did not understand why I should use subroutine programs.It runs like jump.I usually use function(blok).

I have a problem when introducing the motion control unit to the MelSoft Navigator. program telling me that the CPU is stopping. And in the configuration of the gx work-3 te, the motion cpu turns out to be a little more dimmer than the others. what is the reason of this?

I have a problem when introducing the motion control unit to the MelSoft Navigator. program telling me that the CPU is stopping. And in the configuration of the gx work-3 te, the motion cpu turns out to be a little more dimmer than the others. what is the reason of this?

please answer this question for iq-r plc

thanks gambit.I have an extra question.How can I create an interrupt in gx work-3(ı am using İQ-R series plc).I have been using siemens plc.There are many types of interrupt in siemens plc's like cycle interrupt,time delay interrupt.but ı cant see these types in mitsubishi.how can ı find these interrupts?  

we would like to implement an discrete system filter which should be run in fixed scan manner. We called the corresponding FB block (the FB block we written for) in a fixed scan main 1 program but it doesn't work in fixed scan. It works in normal execution main program. In fact any code in fixed scan program isn't executed. Is there any setting to make fixed scan main program to work?

we would like to implement an discrete system filter which should be run in fixed scan manner. We called the corresponding FB block (the FB block we written for) in a fixed scan main 1 program but it doesn't work in fixed scan. It works in normal execution main program. In fact any code in fixed scan program isn't executed. Is there any setting to make fixed scan main program to work?