marckTony

MrPLC Member
  • Content count

    18
  • Joined

  • Last visited

Everything posted by marckTony

  1. load cell SP4M-7Kg

    Hello guys, I have a system of 3 load cells (SP4M-7Kg) attached  to a Micrologix 1500 analog inputs. in the same PLC i have 3 coils for a vibrator, each vibrator is working with signal generators. and the load cells with an external 24vdc Power Supply. i see my load cells readings fluctuating too much even with the vibrator not working. if it is set lets say 70 Grams it is jumping from 68.4 to 74.8 going up an down never never stabilizes in one number, so i suspect am getting noise somewhere put a 100uF capacitor PLC inputs for the load cells but weight just increases more and more. How can realize where is the noise comming? what can i use as a filter? how can i improve this system? should i changed it to digital?   any help welcome! thanks.  questions?    
  2. load cell SP4M-7Kg

    YES sir I am using that module. i connect the ground wires for the vibrators (which wasn't connected ) but no difference at all. i checked all ground cables and shields connected. i will try using 100uF capacitor on excitation lines for load cell and 1000 uF for  power supply outlet 24VDC i dont know what else can i try? any suggestions?  
  3. load cell SP4M-7Kg

    MrAutomation The load cell cables are 4 meters long and the shielding looks correct but the ground side for the vibrators, wasn't  connected to the ground line. try to connect that and see what happens.
  4. EA7-T8C HMI and C-more

    thanks
  5. EA7-T8C HMI and C-more

    Hello guys, i need to make and upgrade on my 2 HMI EA7-T8C to EA9-T8CL and my question is if I can use the same C-more 6.40 software to read the program on the EA7?? or how can I read it? i know there is no problems with the EA9, but what happen with EA7  ?     thanks!
  6. serial number C-more 6.21

    I need a serial number for my demo version c-more 6.21, somebody can help me? or how can i update my C-more 6.12 to another newer at least 6.13   thanks you a lot 
  7. serial number C-more 6.21

    Thanks a lot i just called for update to tech. what happened is that i lost my key code, but i got it again. thanks a lot they updated me for free. thanks.
  8. software information

    Hello guys, i have some questions about allen bradly sofware. i have a some old PLC SLC503, SLC500, micrologix1500. i want to migrate to a newer version compacktlogix 5380 which i know needs   Studio 5000 Logix Designer software, RSNetwork, and RSLinx. my question is, Is there any software or plataform that support bout processors? or do i need rslogix500 for SLC503 and then studio5000 for compacklogix5380. what is the normal process to migrate from older processor to newer version?  
  9. software information

    thank you guys for your help. another question i notice there are different levels of RSLogix500 beginner, standar,......, professional, and one is more expensive   than the other. but what is the difference between those? is that the license expiration time?   can anybody send a webpage that i can read about that or something. thanks other question. is RSlinx included when you buy RSlogix or Studio5000?
  10. Add pause botton Allen bradly SLC5/03

    I was thinking about a Tnd temporary end to stop scanning or decreasing the speed of the motor's VFDs what I want is that when the machine is in auto modo I can use I puch botton to stop the machine for a while, then push the same or other botton to continue the routine.  Rigth now the maccine has just one emergency stop, but when you push it we have to manually send the machine homenpossition to start again in auto mode. 
  11. hello guys, I've got a project and i am not too familiar with the allen bradley PLCs. So I hope you guys can help me with some ideas. we have a palitazer in our class we have to modify the PLC's program and add an extra fisical bottons, pause botton(red botton) and continue botton(green botton)  some times the operator needs to get inside to the enclosure WHILE THE MACHINE IS IN AUTO MODE and that is why we need the stop botton, so the operator can push it and "pause" the machine in any moment. all the outputs and inputs should stay in their current state until the operator press the start/continue bottom, after this the machine should be able to continue the routine.  here is some info about the palletizer  http://bidonequipment.info/pdf%20files/FMC%20CORPORATION%20EZY-150%20Palletizer.pdf I dont know if this is possible or not I've been studyng the ladder, but I could find the solution.  I atached the PLC program in this file, thanks you very much we got the PLC Allen Bradley SLC 5/03  How can I use Temporary End (TND) can this help?   if somebody want to see the PLC program (ladder) just let me know
  12. Add pause botton Allen bradly SLC5/03

    Yes you can download the file from here  thanks a lot 
  13. Add pause botton Allen bradly SLC5/03

    I know what you mean with the safety issues. but this machine is not running in production  never, i mean it only a experimental machine, but i am think in adding a extra physical electrical circuit. we are now testing our ability to  modify the program thanbks
  14. Paletizer View File hello guys, I've got a project and i am not too familiar with the allen bradley PLCs. So I hope you guys can help me with some ideas. we have a palitazer in our class we have to modify the PLC's program and add an extra fisical bottons, pause botton(red botton) and continue botton(green botton)  some times the operator needs to get inside to the enclosure  WHILE THE MACHINE IS IN AUTO MODE and that is why we need the stop botton, so the operator can push it and "pause" the machine in any moment. all the outputs and inputs should stay in their current state until the operator press the start/continue bottom, after this the machine should be able to continue the routine.  I dont know if this is possible or not I've been studyng the ladder, but I could find the solution.  I atached the PLC program in this file, thanks you very much we got the PLC Allen Bradley SLC 5/03  Submitter marckTony Submitted 09/01/17 Category PLC Sample Code
  15. Paletizer

    Version 1.0.0

    29 downloads

    hello guys, I've got a project and i am not too familiar with the allen bradley PLCs. So I hope you guys can help me with some ideas. we have a palitazer in our class we have to modify the PLC's program and add an extra fisical bottons, pause botton(red botton) and continue botton(green botton)  some times the operator needs to get inside to the enclosure WHILE THE MACHINE IS IN AUTO MODE and that is why we need the stop botton, so the operator can push it and "pause" the machine in any moment. all the outputs and inputs should stay in their current state until the operator press the start/continue bottom, after this the machine should be able to continue the routine.  here is some info about the palletizer  http://bidonequipment.info/pdf%20files/FMC%20CORPORATION%20EZY-150%20Palletizer.pdf I dont know if this is possible or not I've been studyng the ladder, but I could find the solution.  I atached the PLC program in this file, thanks you very much we got the PLC Allen Bradley SLC 5/03 
  16. SLC 5/03 1747-L531 and panel view C600

    THANKS FOR YOUR INFO GUYS, HELP A LOT.
  17. Hello I am kind new at Allen B. PLC and i have to make some changes in the PLC program: - add 2 safety switches. - add 4 photo sensor. just want to know what software do i need to make changes online. PLC \I have is  SLC 5/03 1747-L531 also have a touch scream terminal that i need to modify   panel view C600   thanks for your help guys.