Subarna_G

thank you for your kind response. I have these instruction in Sysmac studio but I dont Have Idea to connect it to factorytalk site edition. For CJ-series I use Kapware as a connecting software but in Kepware there is noNJ-series in the dropdown button. I tried OPC server but OPC servere didn't accept word tags.

Hi Mr.PLCs I have the experience to connect cj_series with FactoryTalk through Kepware but I didn't get NJ-Series in the dropdown button. Is there any other way around to control NJ-series PLC by FactoryTalk Site edition? If there is any software to do the job, please let me know. Thanks all Subarna

hi dear PLC fellow: I am new  for sysmac studio. I have to prepare program for  servomotor R88M-K05030H-S2  controlled by ac drive R88D-KNA5L-ECT with buitt-in etherCAT. The PLC controller is NJ301-1100. I used the step by step instruction given in the following manual but It there is output 1 active instead of input 1 as given in the instruction. If you have proper manual for the this servo system please help me. It is my final year project. Please see the following manual.  <Startup_guide_NJ_series_motion control_W514>    

Hi every one! I HAVE to interlock between PanelView Plus and FactoryTalk View SE  so that when I used Panel view the the FTSE must stopped and when I used FTSE through my PC the panael view must automatically deactivate. If anybody have idea please help me. it is a problem encounter in my project work.