Jinx
MrPLC Member-
Content count
15 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by Jinx
-
Hi, Can anyone point me in the right direction to retrieve the manual for GX works2 help for FXCPU. I have tried to find it on mymitsubishi account under downloads for manuals but unsuccessful. Im trying to understand a section of a plc and going through help comes up with the following message
-
Hi, I have been given a task of upgrading our Printers onsite to different manufacturer. we have new model already onsite and i have looked at the logic of clearing the buffer but am unfamiliar with moving H(value) into registers. See example in attachment. Can someone explain what these H values mean
-
Thanks. should have guessed that! doh
-
Hi, I have a program where the output stays on through a shift register sequence of m coils from m800 to m816 but they have programmed each m coil as an OR function holding the output on. I am in the middle of adding new OR functions to hold output on in seperate machine sequence but im having an error 'OVER THE EDIT RANGE' How do i create an input for example [=>m801 =<m8016] (stay on from m801 to m816) I am using Q series PLC
-
thats a great help. thank you all. i have managed to write the the input in that configuration. i will test it on my machine today.
-
hi Scot, Like the above but im using simple ladder format. The NE function block im assuming is not equals.. so in ladder format i would write [<> k4m801]
-
Hi Rodney and whyme. I made my own rs232 - rs422 adaptor last night following the pin layout I found in the e -screens manual. When I connect my Cab5 cable PC end and use home made adaptor on HMI end, nothing happens on screen. doesn't boot up! I have also tried connecting the 5V supply to E-50 but it just keeps looking for the FX PLC that it connects to when connected to machine.
-
Can someone send me an image of the e50 pinout arrangement to create my own Rs232 cable to E50 screen. Or advise me where I can purchase a 232-25-ADP. I only require to do a small Modification on a HMI already in use