-
Content count
24 -
Joined
-
Last visited
Community Reputation
0 NeutralAbout Must@@@@
-
Rank
Sparky
Profile Information
- Country Turkey
-
hello everybody ı have machıne wıth sımatıc s7-1500 wıth tp1200 comfort how can ı upload program from hmı tp 1200 comfort to my laptop wıth tıaportal v17 ı dıd backup and tempt fıle but ı dont no haw can open fıle
-
I have connected 2 temperature devices with him delta with plc delta by rs485. When I run plc I can see the temperature change on pc but the problem in hmi it's give errors. Com 2 errors I need someone help me to connect these devices please
-
Hello Mr Collin i use many inputs to analoge inputs 6ES5 466_3la11, now when the machine was running or stopping, all the inputs to the analoge inputs unit ok. now for porgram the values is ok when no problem, but when the problem happened the inputs not ok inside porgram, but if you test by tester the inputs ok Now in the picture inside Fb1 mw102 the value 5fb is ok when no problem.but when we faced problem the value disappeared..
-
Thanks Mr wsan,and everybody help me,that what I looked for. Regards
-
Thank you Sir, the problem is that I do not have the password plc and at the same time I have a problem with the output of channel number 3 of the da4a module, as you mentioned, ihave connected the output of the first inverter 0_10 v with the input of the second inverter but when the speed for first inverter increas the output 0_10v decrease, therfor I thought if I connect the same input for tow inverters
-
Yes sir, this is what I meant but the reference is from 0_10 v, if the parallel is connected, the signal is weak
-
Yes sir, this is what I meant but the reference is from 0_10 v, if the parallel is connected, the signal is weak
-
hello everyone. I have plc fxu3, and I need to connect tow motors with the same channel from fxu3_DA4, can I DO?
-
Hi everyone I have PLC delta dvp60es2 ,when I connect with software wplsoft v2.37 The PLC ask me to write PLC ID What plc ID I don't know please help me Best regards