tranthanhtung

MrPLC Member
  • Content count

    42
  • Joined

  • Last visited

Everything posted by tranthanhtung

  1. Dear, I'm trying read/write program from GT Designer to HMI (GT2708) via Ethernet. However, I can't connect with HMI via Ethernet, It popup messenge as attach file Who have experience about this, pls share it for me Thank you ETHERNET.GTX
  2. GT Designer connect with HMI GT2708 via Ethernet

    Yep, I already ping --> it's ok. But, can't connect from GT designer, it displayed as first post.  
  3. GT Designer connect with HMI GT2708 via Ethernet

    both default/change IP address are same error
  4. GT Designer connect with HMI GT2708 via Ethernet

    Hi, HMI has program, I want to connect to update program Via directly or ethernet swtich is same error.    
  5. Gateway PLC + PC

    Dear all, I would like connecting to send/receive data between PC and PLC (AnS-PLC) as diagram (image attach) However, I have not device type/module ethernet to connect Optical filber ... (From (2) to (7)) If you have idea about these module or documentation, please share it for me. Best regard!  
  6. RFID V680

    Dear , I want to connect PC and RFID V680-CA1D. But, I'm using Multiway for testing and not see any response Who's experience to do it? could you share it for me? Thanks so much!  
  7. Barcode Reader -- GOT

    Dear all, I've already connected Barcode reader to input data for GOT, But, before using Barcode reader to scan data for GOT, I need press to position where will receive data. Example: if I want to scan data for Barcode#1 --> I need press to GD2000 --> Scan Barcode#1 Next, Press to GD2005 --> Scan Barcode#2 .... It's waste time press in HMI.  So, I would like do as flow: Press to GD2000 -->  Scan Barcode#1 --> (data auto fill to GD2000) --> Scan Barcode#2 --> Data auto fill to GD2005 --> .... Who have experience about this, could you share method for me? Thanks and Best regards!   BARCODE.GTW
  8. FTP to HMI (GS2107)

    Dear  I would like connect from PC to HMI via FTP (FTP server in HMI) However, It's ok with GT15** , but I can't do with GS2107*** as image below. Who do you have experience about its, could you share some comment for me? Thanks so much!
  9. Barcode Reader -- GOT

    Do you have any recommend for bit that I need enable its to marking where receive data? I can build it in PLC or script in HMI Thanks so much!  
  10. Convert HMI GT1000 to GT2000

    ah, thanks so much. I already change config that connected between PLC and HMI ==> and, it's ok. Thanks for your comment  
  11. Convert HMI GT1000 to GT2000

    Dear, I'm trying convert HMI from GT1000 to GT2000 and have issue: - After convert from GT2000, we can't see/keyin data for words D2000 pls check attach file for more detail./ Who have experience about this case? could you send for me some advantage Thanks so much!
  12. Convert HMI GT1000 to GT2000

    Dear, I'm trying convert HMI from GT1000 to GT2000 and have issue: - After convert from GT2000, we can't see/keyin data for words D2000 pls check attach file for more detail./ Who have experience about this case? could you send for me some advantage Thanks so much!
  13. Synchronize time of Proface's HMI and PC

    I'm using HMI of Proface and PLC of Mitsubishi, (A series or FX) could you give me some advantage?
  14. Synchronize time of Proface's HMI and PC

    Dear, Sometimes, I check time of Proface's HMI is wrong with current time. So, I would like setup time for Proface's HMI from PC, daily. And, I also put this time for PLC that connected with HMI, Who have the experience about this? could you give for me some comment? Thanks so much!
  15. synchronize time from PC and HMI

    Ok, Thanks so much  Gambit, I will try its.
  16. synchronize time from PC and HMI

    Dear, I have HMI GT16, it connected with PC However, HMI time is difference with PC. ==> And I would like send time from PC to HMI PC can read time in GS650, but can't write value to GS650. Could you help me to synchronize time between PC and HMI ? Thanks so much!  
  17. [Keyence] DT STUDIO Manual

    Dear all, I would like study DT-100A of Keyence. https://www.keyence.co.jp/products/controls/data-logging/dt/models/dt-100a/ But, I only found a little manual of this device. I can't find manual for setup, it's only inform that need DT-Studio, https://www.keyence.co.jp/products/controls/data-logging/dt/models/dt-h5/ Do you have any document that explain how to setup to record data from PLC and send to PC (via FPT...)? Could you share them for me? Thanks so much!  
  18. synchronize time from PC and HMI

    Thanks so much, But, could you reference for me any documentation first? Example: What's the documentation which you cut and send image for me?  
  19. synchronize time from PC and HMI

    Thanks so much Gambit, Do you have any document about memory of GOT that explain detail: GD, GS ... of GOT? Could you share them for me? I have not found this documentation in Mitsubishi website  
  20. [GOT2000] GT2708

    actually, I don't want to use PLC memory  Seem, GT2000  difference with GT1000 In GT1000, I only select "Base/Windows screen" to update ==> GD/GB is not reset. (GOT1000) In GT2000, I also only select "Base/Windows screen" --> GD/GB is reset (image GOT2000) Could you have any idea to solve it?
  21. [GOT2000] GT2708

    Dears, I have got 2708vtba and I using GT Designer 2000 to install software for it. And, I used GD memory of GT to write program for GT2708 ; But, I find some question: 1. How to keep value of GD/GB after load program, although I only load Base/Windows screen. 2. GT2000 has special GD or not? Because after load program, some data still keep not change (display -1 or 65535) Could you give some advance for me? Thanks so much!  
  22. [GOT2000] GT2708

    Sorry, I need 1000 word for my program to display data in HMI. But, PLC have 1024 word and already used 1000 word. ==> how to selection words of PLC?
  23. [GOT2000] GT2708

    I don't want to modify PLC to avoid affect to current operation and not enough memory  
  24. Gateway PLC + PC

    Yes, GT1565 have still the RS-232 port available. And, ... It's difficult to find a solution for that. I am using GT15-J71E71-100 & GT15-FNB to send/receive data between GOT and PC, now. However, GT15-FNB is the end of product; we can't order this item. I also don't know that why need GT15-FNB to from GOT to PC; Actually, I still "ping IP address" from PC to GOT; but PC can't connect via Mx-Component & FTP to get data in GOT    
  25. HELP WITH A PROFACE AND QUICKDESIGNER

    Hi spraks, can you share your project to any member support for you?