tranthanhtung

MrPLC Member
  • Content count

    48
  • Joined

  • Last visited

Everything posted by tranthanhtung

  1. [GOT2000] GT2708

    actually, I don't want to use PLC memory  Seem, GT2000  difference with GT1000 In GT1000, I only select "Base/Windows screen" to update ==> GD/GB is not reset. (GOT1000) In GT2000, I also only select "Base/Windows screen" --> GD/GB is reset (image GOT2000) Could you have any idea to solve it?
  2. [GOT2000] GT2708

    Dears, I have got 2708vtba and I using GT Designer 2000 to install software for it. And, I used GD memory of GT to write program for GT2708 ; But, I find some question: 1. How to keep value of GD/GB after load program, although I only load Base/Windows screen. 2. GT2000 has special GD or not? Because after load program, some data still keep not change (display -1 or 65535) Could you give some advance for me? Thanks so much!  
  3. [GOT2000] GT2708

    Sorry, I need 1000 word for my program to display data in HMI. But, PLC have 1024 word and already used 1000 word. ==> how to selection words of PLC?
  4. [GOT2000] GT2708

    I don't want to modify PLC to avoid affect to current operation and not enough memory  
  5. Gateway PLC + PC

    Yes, GT1565 have still the RS-232 port available. And, ... It's difficult to find a solution for that. I am using GT15-J71E71-100 & GT15-FNB to send/receive data between GOT and PC, now. However, GT15-FNB is the end of product; we can't order this item. I also don't know that why need GT15-FNB to from GOT to PC; Actually, I still "ping IP address" from PC to GOT; but PC can't connect via Mx-Component & FTP to get data in GOT    
  6. HELP WITH A PROFACE AND QUICKDESIGNER

    Hi spraks, can you share your project to any member support for you?
  7. A1SD51S, BASIC Module

    Thank you Crossbow
  8. Dear ady_kurnia,

    I am studying A1SD51S Module of A Series. But, I find that we need sw1ivd-ad51hp-e software.

    do you have this software?

    Can you share it for me?

    Thanks so much!

  9. A1SD51S, BASIC Module

    Dear all, I also want to read/write data between PC and PLC (PLC has A1SD51S Module) And, I find some documentation as below: http://www.mitsubishielectric.co.jp/fa/products/faspec/download.do?kisyu=/plcq&formNm=700005332&category=ex&id=spec I study this manual and see: 1. We need software: sw1ivd-ad51hp-e. However, it only install in Windows 98/XP --> I still download this software test in other Windows(Windows 7 or Windows 10) ---> If you have this software and do it. Please help me to comment this case. 2.If we have many package (include PLC + A1SD51S), we can connect with 1 PC or not. I ask it, because I have not just find register package No. If you have experiences about this module, software.. Pls advantage for me. I know this module is very old, but ... I have the system that already PLC + A1SD51 Module and I'm want to read/write data for i. Thanks so much!      
  10. Gateway PLC + PC

    Sorry, I reply later Current, I already connect as below, It's difference with your image
  11. Gateway PLC + PC

    Dear all, If I change connection between PLC & GT1565, but I find documentation that I need add bus as image and manual attach (It' means change bus) http://www.seec.com.tw/product/file/file_315_1215.pdf Who do you know about these bus, pls share its for me. Thanks so much!
  12. Gateway PLC + PC

    Thanks for your reply, I still ask more question, we can connect parallel GOT & Proface to PLC or not?
  13. Gateway PLC + PC

    Thanks for your recommend We've pro-face and it's many port (1 Ethernet + 1 USB + 1RS-232_male + 1RS232 female) So, I'm want to use 1 Ethernet  --> PC 1 RS232 ---> GT1565  (But, I don't know type cable to connect between HMI) If you have any comment, pls share it for me. Best regards!
  14. Gateway PLC + PC

    Thanks for your rely About methods that you said: 1. GT15-J71E71-100     ==> We need add more device:          - Change bus connect between GOT15 and PLC (current using A-Bus)          - To using GT15-J71E71 for GT15, we also add FNB card, right? 2. If Using MelsecNet-H, we will change almost structure   ==> I think it's not good. I propose other method, I change HMI type for cost. So, I would like change GOT's mitsubishi to GP3000 series proface. and, seem, I only need convert HMI of GOT to GP3000. However, I'm not clear cable type that to connect GOT/PLC Mitsubishi and GP3000 (proface) because GP3000 has only port RS232.  
  15. GOT 2000 Logging function

    I have not use GT2715. But I think it sames with GT15, GT16 that I've done it. Can you share project file that you use do?
  16. Gateway PLC + PC

    Thanks Luke.S Perhaps, I mistake explain for you *** Current system (2 machine)     (1) A Series( A2-USH CPU )  -- GOT1565     (2) FX Series  - GOT1565 --> I'm want to connect and get data from this machine to PC via Ethernet. And, I have not yet method to connect this machine and PC to cheapest. I also think add more device/module, but I've not clear these module. If you have experience about case, please share them for me. Thanks so much!    
  17. Gateway PLC + PC

    In this case, It's current system. It can't connect ethernet and I would like upgrade its to connect ethernet. So, I would like ask what module that I add to this system and it can connect ethernet. And, If A Series can't, I have F-Series can upgrade or not?  
  18. Gateway PLC + PC

    Thank you Luke.S As you comment, I think the upgrade GOT (GT15) to connect Ethernet is good method, isn't it? It costs is small than upgrade A Series to Q Series then add more module for Q Series to connect with PC, right?  
  19. Memory card for GOT1050

    Thank you Akahige I will study more.
  20. Memory card for GOT1050

    Dear everyone I have GOT1050 and want to load data from CF Card and display in screen. However, I try GT05 Mem, but it's difference type so can't attach. Who do you know, pls share information for me to do it. Thanks so much!  
  21. Memory card for GOT1050

    Dear everyone I have GOT1050 and want to load data from CF Card and display in screen. However, I try GT05 Mem, but it's difference type so can't attach. Who do you know, pls share information for me to do it. Thanks so much!  
  22. Display information GT16

    Dear all,  Now, I already connect between GT16 and PC via Ethernet to get information that store in CF Card Beside, GT16 also connected with FX via RS485. And, GT16 display information of PLC and operation in screen is very fast. But, It's seem slowly after I add some screen that display information of PLC I don't know why is it? Please help me to explain the root cause problem and how to improve speed of GT. Best regards!  
  23. Display information GT16

    Dear all,  Now, I already connect between GT16 and PC via Ethernet to get information that store in CF Card Beside, GT16 also connected with FX via RS485. And, GT16 display information of PLC and operation in screen is very fast. But, It's seem slowly after I add some screen that display information of PLC I don't know why is it? Please help me to explain the root cause problem and how to improve speed of GT. Best regards!