desuhardi

Hello All, I want to make cable connection between Omron NP screen and Mitsubishi FX2N CPU (programming port). If somebody know about this, please help about connection diagram. Thank you

Hello, I'm trying to get program from running C200 CPU Omron, with LK201 Host Link. But when install LK201 on CPU, ready led is lit for a while, then change to error led on LK201. With this condition, I can not connect Syswin with CPU, even change with possible configuration at LK201 for baud rate, parity etc. Please help how to solve this problem. Thank you

Hello, I want to control ABB ACS550 inverter (start/stop, speed ref) use RS485 from FX1N-485BD, with Mitsubishi FX1N PLC. I've both manual of them but still have no idea how to send command from PLC to inverter's control registers. Please help...

Any documents that explain how to make form of Modbus package or sample of programs ? Thank you

Hi Karee, Do you mean I can use FX1N PLC with FX1N-485BD for modbus protocol, use GX Developer (ladder) or GX Works 2 ?

Hi Karee, This is communication manual of inverter. Protocol is standard modbus, via RS485.\ I'm using GX Developer for programming FX PLC. ACS550 Fieldbus.pdf

Hello, I've problem with connection between Omron touch screen NP5 and Mitsubishi Melsec-A, use its programming port. Cable connection is correct, according to manual. Use RS422 with 9600, 8, Odd, 1 (COM2 on NP series). Dip switches set on NP are correct. But still can't communicate between them, host PLC error. Is there any setting must be consider ? Thank you

Hello, I need information what software must used for upload/download program to Patlite PCL-01P operation panel and programming cable too. Thank you

Hi Jennings, Thanks for your help.

LS G7MU with ATV31 Hello, I'm using modbus rs485 with LS/LG PLC G7MU to control several inverters ATV31 Schneider. I can start, stop, send speed ref, receive feedback etc, one by one. The problem is I can't start all inverters in the same time, together. If I send start signal on the same time for all inverters, communication become error. Then I put some delay, after send start to inverter-1, delay 10sec, then start inverter-2............... The condition is same to receive feedback signal from inverter, must one by one. Each inverter has its own ID. Please help if any information, how to start all inverters together on same time. Thank you

Thank you drforsythe for your information. I tried to contact them, but their emails are unactive.

Hello All, I need information about software and interface cable, which used for PLC Mars Microset. I can't find this information in net... Thanks

Hi all, I need help to find some information about Winview HMI touch screen, like as specification, software, interface cable etc. Thank you for help.

Thank you Michael

I'm using SW3NIW-A8GOTP Version 20N software for A800 & it's working properly with XP. Supported GOT type : A870GOT-TFT,STN/A810GOT; A870GOT-EL and A85*GOT-STN,L.

You can use Medoc software and cable from Mitsubishi.

Yes, you can copy hw update from one pc to another, but the version of S7 should be same. (Is it legal ?? ) If not same, some hw can't update on other pc. But you still must connect to internet for update the newest hardware. http://anekalistrik.blogspot.com

Before upgrade S7 version, try to update hardware directly from your S7 software and connect to internet. I found steps here : http://anekalistrik.blogspot.com/2008/12/s...are-update.html

First, try to update hardware from S7 software & connect to internet directly. I found steps how to update, here : http://anekalistrik.blogspot.com/2008/12/s...are-update.html If can't, then you must upgrade your S7 to newest version

I'm using CodeSys V2.3 for online with ABB AC500. Contact your local ABB for detail information. http://anekalistrik.blogspot.com

Hello, I want to use WinCC Flexible 2008 in desktop PC to record and display some data. I can display data to graphic, but how to select date/time if I want to display data at specific date/time. I can use only backward button. Please help.... Thank you

Hello all, I want to make kWh record with PC. kWh meter is Merlin Gerin, with 1 impulse of 200ms every 10kWh. Is it possible to connect this pulse to digital input of PLC, like as Mitsubishi FX, Toshiba T1 or others ? Or any other idea how to get kWh data to PC ? Thank you

Hello Crossbow, Thanks for your reply. Is it enough for digital input of FX to receive 200ms signal or need pulse input ? How about maximum length between kWh meter and PLC ? Output from kWh is dry contact. Thank you

Hello, I know this is not related with PLC, but someone here may be can help me. How to select input voltage in inverter reliance UVZC341AG, because it has 2 inputs, 3phase AC and DC ? Thank you

Hello all, I use 6200-series and 1784-PCMK Series B for connect with PLC5, SLC500, SLC5/04. Before I used Windows98 with interchange and had no problem. Now I want to use WinXP but 6200-series can't detect PCMK cards. I already downloaded 1784-PCMK driver for WinXP from Rockwell websites and installed it, work correctly. The memory address of PCMK is F6BFA000-F6BFAFFFF (auto configuration). What kind of setting needed in 6200-series to detect the PCMK ?