Anvesh

Hi.. Waited for Delta reply. But they are not responding as expected. So, decided to change the HMI to DOP-B series. Program development started for the new HMIs... Thank You.. Mr. Cross Bow.    

Hi U can try Epson LX310 (80col) Dot matrix printer or Epson TMU220D(40 Col) Dot matrix printer. If it is a CE terminal, U can see the procedure in RA knowledge base answer ID 28334.   Thanks

HI.. Yes i did. Waiting for their reply

Hi.. The newer version of screen editor V1.05.86 is not compatible with the DOP-AS57CSTD HMI model.   As per the Delta announcement in 2009. This HMI model is present in Screen editor V1.05.81. Please find the attached Delta Enews Doc(HTML). I have searched the internet for the older version but no result. Pls help me..    Thank You...     ++++Delta Automation e-News++++.html

Hi Mr.Crossbow, Yes. I had. As per vendor it was done by a third party company.  Now he has the program backup of HMI but not the configuration software. Is there any way that i can get that particular version of software? In Delta's website, V1.05.78 & V1.05.86 are available but not V1.05.81.   Thanks...

I want the older screen editor version of delta HMI( Version V1.05.81). I think this is the only Version in which Delta DOP-AS57CSTD Model is present.  

Hi... Please find the example VBS for the printing application in Siemens CE terminals for reference... Dim f Dim path Dim mode mode=8 Dim life life=0 Dim hr,hrm Dim min,minm Dim sec,secm hr=Hex(SmartTags("Act_Hour")) min= Hex(SmartTags("Act_Minute")) sec= Hex(SmartTags("Act_Sec")) If hr<10 Then     hrm=0&hr Else     hrm=hr End If If min<10 Then     minm=0&min Else     minm=min End If If sec<10 Then     secm=0&sec Else     secm=sec End If path="\Flash\print.csv" Set f=CreateObject("FileCtl.file") f.Open path,mode f.LinePrint("                                                             " & "EZAMPLE") f.LinePrint("                                                        " & "COMPANY")

Hi, Got this from Rockwell Knowledge Base... Get the reference The information below are required version compatibility between the PanelView Plus terminal and PC KEPServer Enterprise  PanelView Plus Firmware  Computer KEPServer Version "Software Updates" version for download  3.00  4.090.236  3.20.00  3.10  4.105.261  4.00.00  3.20  4.143.301  4.10.00  4.00  4.170.328  4.20.00  5.00  4.264.401  5.00.00  5.10  4.500.462*  6.00.00  Note: The download has both v4.5 and v5.3  6.00  5.3.168.0  6.00.00   6.10  5.3.168.0  6.00.00   7.00  5.7.90.0  7.00.00  Note: The download has both v4.5 and v5.7  8.00 / 8.10 / 8.20  5.13.213.0  8.00.00  Note: The download has both v4.5 and v5.13  9.00  5.19.476.0  9.00.00  Note: The download has both v4.5, v5.13, and v5.19

I have a panelview plus 700 terminal installed with Kepserver Enterprise V5.13.213.0. Will it work with Kepserver Enterprise V5.7.90.0 installed in my PC? Please help me. Thank You.....

Hi Wlederer,   Thank you...   I will go through it and come back...  

How to integrate SQL database for data logging in Beijer IX HMIs.. Hi Theo, Can u help me...?   Thank You...

I want to do a printing application from TP1200 comfort panel HMI. For online printing of data, many suggested to go for VB script. I dont know scripting. Can anyone help me in this regard. 

Hi Theo, Its Working.... I have used the same cable configuration that you have mentioned above with additional shorting of 7,8(RTS,CTS) in 9 pin side.. Thank you for spending your valuable time in resolving this issue.. Its great time for me to work with you...

Hi Theo, Thanks for your response. Yes, my printer ( Epson TM-U220D Dot matrix printer) supports ASCII. I am not using HP printers. I have checked the com2 port settings and printer settings and made them same. But the problem persists. ( 9600, Even, 7, 1) As i know that Completion signal will be enabled when the print trigerring from HMI was completed . This is for our reference only whether the print was completed or not. This will not do any effect on the print signal.  I think the problem is with my printer cable. My printer communication cable  configuration is  9 pin(HMI)                                                                  25 pin(Printer) 2                                                                                           2 3                                                                                           3 5                                                                                           7 7, 8 shorted(RTS,CTS)                                                      4,5 shorted(RTS,CTS)  ( I havent shorted these highlighted pins in my cable, whether it will affect this on my printing application). Please help me regarding this cable configuration.