ladiesandtech

I agree check the output table the address could be set to 1 in the table. The address does not have to be in the actual ladder logix to be set high.

If you would like some extra training resources check out www.ladiesandtech.com for beginner PLC training for Free  

Try these videos and see if this helps ...I am sure you may have already done this The BOOTP-DHCP server program has always disable BOOTP for me and of course making sure that the communications is configured with the BOOTP disable with any program I down load into the controller. https://wordpress.com/post/ladiesandtech.com/400 https://wordpress.com/post/ladiesandtech.com/395  

I was hoping to get feed back on my website.  The site is for beginner PLC programers. The tutorials start right from the beginning with describing what a PLC is and then teaches basic instructions. Please take a look and tell me what you think, I would love the feedback.   thank you   ladiesandtech.com   1. What is a PLC Part1  https://ladiesandtech.com/2015/12/03/watch-whatisaplc1st-on-youtube/  2. What is a PLC Part2  https://ladiesandtech.com/2015/12/09/watch-what-is-a-plc-part-2-on-youtube/ 3. What is a PLC Part3 https://ladiesandtech.com/2015/12/15/watch-plc-programming-tutorial-for-beginners-part-3-on-youtube/ 4. What is the Binary Numbering System https://ladiesandtech.com/2016/04/01/watch-what-is-binary-numbering-system-and-how-to-convert-to-decimal-on-youtube/ 5. Relay Logic Intro https://ladiesandtech.com/2015/12/04/start-stop-motor-circuit/ 6. Relay Logic Intro Start/Stop with a seal  https://ladiesandtech.com/2015/12/04/watch-stop-start-relay-control-circuit-on-youtube/ 7. Relay Logic to Ladder Logic https://ladiesandtech.com/2015/12/04/watch-relaystopstarttoladderlogic-on-youtube/ 8. RSlogix Communication Driver and Configuration Tutorial  https://ladiesandtech.com/2016/01/14/watch-allan-bradley-comms-set-up-on-youtube/ 9. Micrologix500 Communication Set Up Tutorial https://ladiesandtech.com/2016/01/14/watch-allan-bradley-comms-set-up-on-youtube/ 10. Timing Relay Lecture https://ladiesandtech.com/2016/02/11/watch-timing-relay-on-youtube/ 11. RSlogix500 Timer On TON Instruction Tutorial https://ladiesandtech.com/2016/02/14/watch-plc-rslogix500-timer-on-delay-ton-instruction-tutorial-on-youtube/ 12. RSlogix500 Timer  Off TOF Instruction Tutorial https://ladiesandtech.com/2016/02/16/watch-rslogix500-ladder-logic-timer-off-delay-tof-instruction-tutorial-on-youtube/ 13. RSLogix500 Retentive Timer RTO Tutorial https://ladiesandtech.com/2016/02/19/watch-rslogix-ladder-logic-retentive-timer-on-rto-tutorial-on-youtube/ 14. How to do Online Edits in RSlogix500 https://ladiesandtech.com/2016/02/29/watch-how-to-find-and-download-autocad-files-for-allen-bradley-ab-plcs-and-products-on-youtube/ 15. RSlogix500 Counter Tutorial https://ladiesandtech.com/2016/02/25/watch-rslogix500-counters-on-youtube/ 16. RSlogix500 Counter Up CTU Tutorial https://ladiesandtech.com/2016/02/26/watch-rslogix500-count-up-ctu-instruction-tutorial-on-youtube/ 17. RSLogix500 Move MOV instruction Tutorial Part 1 https://ladiesandtech.com/2016/03/14/watch-rslogix-tutorial-on-move-instructions-part-1-on-youtube/ 18. RSLogix500 Move MOV instruction Tutorial Part 2 https://ladiesandtech.com/2016/03/14/watch-rslogix-tutorial-on-move-instructions-part-2-on-youtube/ 19. Rslogix500 Compair Instructions , LES, LIM, EQU etc Tutorial https://ladiesandtech.com/2016/03/17/watch-rslogix-tutorial-on-compair-instructions-grt-lim-equ-les-etc-on-youtube/ 20.How to Create a flashing bit in RSlogix500 using timers https://ladiesandtech.com/2016/03/24/watch-how-to-create-a-flashing-light-program-in-rslogix500-on-youtube/ 21. How to Create a program with a flashing light https://ladiesandtech.com/2016/03/24/watch-how-to-create-a-flashing-light-program-in-rslogix500-on-youtube/