KDunaikin

In terminal "+24" you need +24v DC In terminal "-24" you need 0v DC

HELLO Any body can help. i have NT11 OMRON terminal, I set dip SW6 in 1, and erase program. After this NT terminal is in INSTALL MODE 1.1, I use NT-series System installer for install sistem, and don,t have communication, may be i need other driver for this NT terminal?

Hello Anybody can help me, can I use FX2N-4AD-PT with termo sensor Ni1000

HELLO ALL. Anybody know, can I connect F930GOT-BBD-K-E with OMRON PLC CPM1A. Please said me what cable you use for it.

Hello. Anybody can help me. I have termosensor type fe/co , can I use FX2N-4AD-TC for this sensor. I connect 4 sensor type fe/ko in FX2N-4AD-TC. 2ch sensor be correct, any sensor 1ch,3ch,4ch be not correct. What problem Ihave? can I use FX2N-4AD-TC for termosensor type fe/co.

HELLO ANY BODY CAN GIVE ADVICE, WHETHER THERE IS A MODULE OF EXPANSION FOR PLC CJ, FOR CONNECTION ABSOLUTE 12 BIT PULSE ENCODER. SPEED OF ROTATION 440 RPM.

Thank you. I make Grip switch "disable", and touch screen is active when grip swich not press.

Hello All. Anybody can help me? I have F940GOT-SBD-H-E with FX2N. In F940GOT-SBD-H-E i want grip swith button, when grip swith is press touch screen is active, (i can press bit keys, input integer variables...), when grip swith is not press touch screen is not active. Can i make in GT Designer2 situation when grip swith is not press, touch screen is active?, bighouse press grip swith and press button in touch screen panel is very Inconveniently

Hello. I want connect operator terminal OMRON NT21 with PLC Mitsubishi FX2N, in software NTST4.6E not driver for connection terminal OMRON NT21 with PLC Mitsubishi FX2N, anybody know where i can download this driver. Can I connect NT21 with Mitsubishi FX2N?

Anybody know where I can dowload electrical schematic diagram for invertor FR-E540 PCB E54GA7.5D, PCB E54CA7.5C-EC, PCB E54MA7.5C-EC.

possible may be 936-381489391

961-381949269

For information: In my project M1-send A M2-Send A1 M3-Send B M4-RSTError IC-Inst_Code SEND-data in FBD "SendRecieveFX"

Hello. I programming in GX IEC Developer with use FX2N-485BD. In this project not use "InverterCommunication" FBd Because "InverterCommunication" FBd very difficult for perception(recognition). Therefore, I use for management friquency invertor FBD SendReceiveFX because it very simple With some corrective amendments. long tried to use SendReceiveFX FBD Without InverterCommunication FDd also has come to a conclusion It is very important to write down D8129=0, M8161=TRUE, D8120=3743, D8125=13. Without the given corrective amendments FBD SendReceiveFX will not work itself. The given example very simple I used it for testing management invertor. I used the panel of the operator F930GOT for record M1, M2, M3, M4, IC, SEND variable. For examples Send IC(instuction code)=250, SEND (Data)=2 and M2=TRUE INVERTOR RUN FORWARD. offer use thus, I wait for the messages at whom that it has turned out If you have this example not work,write me. Dunaikin Konstantin Service technician "Electrostyle" Co. Moscow Russia. tel. (095) 514-93-16 add.106. kdunaikin@estl.ru www.estl.ru

If you need, i can send for you examples of rpoject with communication FX2N with FR-A540 from FX2n-485-BD. Please give you E-mail. Konstantin E-mail kdunaikin@estl.ru