amadkey
MrPLC Member-
Content count
20 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by amadkey
-
Hi All, Currently i am using allen bradley dataliner 2706 D21J8. I am planning to replace to other device that is similar with the current dataliner. Can u recommend me the device to be use?
-
Hi all, I have problem regarding usb driver issue. I want to read programming from PLC Q series cpu. Currently im using window7 pro 32bit. Anyone have the usb driver installer?
-
thanks for reply. im thinking to use FX3U-ENET-ADP to use LAN as the connection to the PLC.
-
Hi all, I want to ask. How to connect FX3u-32M plc using LAN cable? possible or not to convert the usb cable become LAN? currently im using RS232 convert become to usb and connect to my pc
-
the problem is the IP address in my PC is 192.168.1.82. I have two PLC with address 192.168.1.100 and 100.10.100.20 respectively. My PC IP address 192.168.1.82 can read the PLC 192.168.1.100 without any error. But the problem is to read PLC 100.10.100.10 So, i have to configure my PC local area network adaptor using advance setting and put another IP address to reach the PLC 100.10.100.20.
-
Hi all, I have problem to connect my Pc to PLC. when i find cpu using build in ethernet, the PLC was found. Then i choose the PLC cpu, and try to test the connection an error show. how to solve this problem?
-
problem solve. thanks all
-
Hi all, i want to ask. How to make the alarm occurrences back to zero after autosave?
-
Hi all. I want to ask. It is possible or not to use 1 pc and a LAN spliter to read 2 plc cpu in same time?
-
it is possible to use splitter?
-
Hi all, I want upgrade my GT DESIGNER 3 V1.61R to the newest version. Please advice.. how to upgrade version thanks
-
Thanks for your info Crossbow. Do you have link to download the updated software? download update here: http://www.mitsubishielectric.co.jp/fa/download/software/detailsearch.do?mode=software&kisyu=/plcq&shiryoid=0000000016&kisyuid=0&lang=0&select=0&softid=0&infostatus=0_0_0&viewradio=0&viewstatus=0&viewpos=0
-
Hi all I have problem regarding to GX WORKS 2 software. currently im using GX WORKS 2 V1.91 I want to read save file from GX WORKS 2 V1.540N then problem is the save file cannot read in GX WORKS 2 V1.91 popup show : the plc type of the specified project is not support by this version. please execute it again after installing the complaint version. Please advice me..
-
Hi all, I already connected a PC monitor at the touch screen and the monitor display same as the touch screen. It is possible to do split screen for mitsubishi gt1685m-stbd? Need advice.
-
hi all, i am using mitsubishi plc q series. i want to ask u for help. if in d10 have data 25, how to move the number 5 to other destination?
-
yup. want to transfer last digit in any number. now settle my problem using [move D7 K1M100]
-
sttchui, can u attach the I/F communication setting print screen?