LD_M

MrPLC Member
  • Content count

    95
  • Joined

  • Last visited

Everything posted by LD_M

  1. Modbus Master FB for the New M1 inverters

    Following on this request...
  2. NB HMI Software V1.531

    Thanks BobB for the link. I've downloaded the fonts, and installed in the laptop W10, restarted the laptop, and open again the NB HMI software.     
  3. Hi, It's been a while since I last worked with NB hmi, and when I need to update one of the hmi, it shows a message of missing font.  On the menu toolbar, under tools there is a Check missing font  selection, but no selection on how to upload missing fonts? Is there any provision on how to upload the missing fonts? or how do we update / upload missing fonts, on the NB software? Thank you.
  4. Hello, We have a mechanical packaging machine ( horizontal flow pack machine ), which the OEM is no longer supporting the spare parts.  The direction of the management now, is to convert the mechanical drive component into servo control system.  I am planning to use Omron PLC - NX1P2 , NA HMI and 1S Servo system to convert the existing packaging control system. The local Omron support is committed to assist us on the software / programming side, but not on the machine design conversion ( mechanical ).  Since, this will be my first experience in handling the modification, I am looking for someone ( with packaging machine conversion / modification experience ) to guide / assist / consult on this project ( this will be a paid consultation / assistance ). To those who had been using the motor sizing tool software, how do you size a mechanical system into a servo drive ( motor and gearbox )? Is there a hard and fast rule, in sizing a system? example is the packaging machine? infeed lugpin or the rotary knife? There are instances, where your system does not fall into one of the categories in the selection. Appreciate if you could share your inputs. Thanks.    
  5. Yes, you are right. We will removed the mechanical linkages on the infeed / lugpin chain, sealing wheels and the rotary knife.  Each section / driven element will have a servo motor to control the speed and synchronization. The existing machine has only 1 drive motor and all are link with belts, gears, brakes / clutches.  Also, no documentation available for the machine, as reference. I will be basically starting from scratch, that's the reason why I am looking for a consultant. The machine modification / conversion will be done in-house.
  6. SCU 41 Modbus v7 Inverter

    Hi Chris, Thank you very much. The page is now fixed.
  7. Hi, I know this is already an old post, but if you still wanted to have a decompiled file. I tried decompiling the file, but it says the file is corrupted. If you still wanted to decompile this file .pkg, make a new attachment of the file which is not corrupted, and I will try again.    
  8. Recipes using NB HMI + CP1

    Dear Michael, Thank you for fixing the link.  
  9. Hi guys, I just lost the ethernet direct connection, for my CP1L plc.  I was able to use this connection few days back, but yesterday, I did a network reset on my laptop, since I cannot login on our company's wifi,  I did not know that doing this, will remove the plc ethernet setting / connection. Today, I could not connect to the CP1l plc, even changing ethernet cables to be sure. I have read from different post, that I could run again the Omron direct ethernet utility tool, but I could not find it in the folders of the CX-One.  I also looked in the installation folders, but also not available there.   Is the utility tool available for download? Or I could run it from the laptop, the utility is already installed, together with the CX-One? I am using W10, 64 bit,  PLC hardware: CP1L-EM ,  Cx_Programmer : v9.7 Thanks for your help. Cheers. Leo
  10. Recipes using NB HMI + CP1

    Hi Admins, Could you kindly restore or fix this page, the sample Pp RecipeTest.zip is greyed out and cannot be opened. I am currently working on a recipe project, and is looking for some guidelines. Thank you very much.
  11. CP1L - Direct Ethernet Connection

    Hi,  In your PC, go to the windows logo ( lower left, left click ) >Go to Omron folder >Communication Middleware Utilities - click open the folder >DirectEthernet Utility Run the application. Hope this will help.    
  12. Hi, I just opened my CX- Programmer and to find an software installation ( CX Common  Components / CPS Upgrade ), and this results in a failure.  Even when cancelling the update will still continue the update, and it will eventually looped back. The software can only be closed thru the task manager application. The update failure is CX Common Compnents / CPS Version Upgrade Software_2020.04_0401. I tried running the auto update, but there were no available updates for the CX-Programmer. I just installed the latest omron updates last week. Anybody having the same issues on the CX Common Components failure? If you were able to solved this issue, kindly share what have you done / or links to where I can find the solution. Thank you. Regards. Leo
  13. Where are my Menus in Simulator Window?

    Also the same with my CX-Designer v3.730. When running in simulation window, the menus were missing. Hope Omron will fix this up, on the next update version.  
  14. free HMI bitmap or jpeg

    Thank you for the help.
  15. Hi, I came across a file which mentions that it is possible, to update the bitmaps in the cx designer. I tried searching for the zip file file to try in upgrading my cx designer, but unfortunately, could not find the files in the web ( myomron site ). If someone had already done the bitmap upgrading, could you kindly point me in the correct direction, where to get the files? Attached is the document on how to update the bitmap and template, but I don't have the files. Thank you.   CX_DesignerLibrary_Update.pdf
  16. free HMI bitmap or jpeg

    Hi Admins, Could you kindly fix the links for the bitmap file? I am looking for bitmaps, to use on the CX-Designer. Thank you.  
  17. Automatic update NS screen time/date from PLC

    Dear Michael, I was able to access and download the links. Thank you very much.  
  18. Automatic update NS screen time/date from PLC

    Hi Admin, Could you kindly fix this page, the file could not be accessed anymore. Thank you for the help.    
  19. Automatic update NS screen time/date from PLC

    Hi, Can I request the admin/s, to kindly fix the link of this page.  The file is not available and was grayed out.  Thank you.
  20. Hi, I tried disabling the anti-virus and do a clean reboot, but still the same failure. Anybody who have a copy of automation software update files, for the CX Common Components? could you kindly share the files? so that I can re-install the " missing files ". Anyone experiencing the same issues? on the CX- Common Components / CPS Version Upgrade Software installation failure? Thanks and regards.  
  21. I have an omron automation software update only last week, and the updates were installed.  I have no error after that update, it is only this week when I tried opening the cx programmer, that this issue pops out. I will try to temporarily disable my AV, and then check if the installation will be completed. Thanks.
  22. ModBus and Altivar Invertors

    Hi Admin/s, Could you kindly repair this page / links, as the files are not accessible for download. I am still learning on how to do a modbus program, and this page has a lot of resource / info, that could help me. Thank you for your kindness. Cheers. Leo 
  23. CP1L Modbus RTU-Easy Master

    Hi IO_Rack, Thanks for the link,  I'm studying the MODBUS, specifically on the CP1L plc unit.   I have downloaded files and manuals pertaining to the modbus, using cp1e, cp1L and CJ's....but still could not wrap my head around the topic.....  on the DM and register addressing. Cheers.  
  24. CP1L Modbus RTU-Easy Master

    Hi Jay, Could you please post again the Easy_Modbus_Master pdf?, I am unable to download the file on the current link, as the link might be already broken. Thank you.    
  25. Omron Singapore - Contact Person / Details

    Hi IO_Rack, Thanks for the link provided.