gruka

MrPLC Member
  • Content count

    7
  • Joined

  • Last visited

Community Reputation

0 Neutral

About gruka

  • Rank
    Newbie

Profile Information

  • Country Malawi

Recent Profile Visitors

914 profile views
  1. yes ,how to upload it here for you to check for me
  2. Thanks very much for your quick response after checking the manual the program associated with the machine was 6070. This is according to the manual that came with the machine.
  3. Hallo Experts I want help to program Mitsubishi FX2c cpu with GX software.<The machine was working ok till the battery went dead. I have the gx software version 8.9 and the cable. Communication is established and the gx software is able to identify the module as FX2C cpu.May someone help and guide me through how to program me the module to make the machine start working again. The Machine is used for making plastic bottles Please guide me step by step.
  4. Simple programming cable for Mitsubishi FX

    Hallo could someone confirm if the the Rajsiyer cable modification works with changing resistor to pin 2 from 3 on 25 pin male connector to PLC. I have two machines Mitsubishi FX2-CPU which developed a problem after battery failure. I made the cable as designed and try to program with GX Developer v8.91 but with no success in communication. I would I appreciate if some one may help.
  5. May someone give the simple wiring cable diagram to program Mitsubishi FX2-CPU Jy331A57001C board with Gx Developer software , i would appreciate if you may as well give in details which files to load first cause the machine stops cause of the battery failure. Below is the picture of the module to be programmed.
  6. Simple programming cable for Mitsubishi FX

    May someone give me the schematic diagram of the sc09 cable,i want to build myself and where I could download the GX programmer and files to program the FX-128M and FX-80M
  7. FX-128MT CABLE PINOUT

    IAdmin may you help where to download the software and the cable pinout of sc09