MrPLC Member
  • Content count

  • Joined

  • Last visited

Everything posted by mulderm

  1. Hello, I use RSLogix 5. Now I have change for example 5 rungs in online edit mode. Places: rung 12 in programfile 2, rung 45 in programfile 6, rung 33 in programfile 7, rung 24 in programfile 4,and rung 22 in programfile 8. How can I selected all this rungs for in Test-mode? Must I step for step selecting the edits rung? mulderm
  2. Hi everyone, I have a S7-300 CPU315-2DP PLC setup with an FM350-1 counter. With an input count and let him make use of a hardware interrupt. The interrupt is created by: closing the gate hardware, achieving a comparison value 1 or 2. I've tested or OB40 is called in and he does, I just want to know which interrupt is being made. Interrupt the conclusion of the hardware gate, reaching comparison value reached 1 or 2 from comparison value. Have made a move in OB40 namely: # OB40_POINT_ADDR move to MD40 Only he remains always 0. Why does it not, and how do I know? Regards, mulderm
  3. Making histogram with VBScript

    Hello, I known in RSLogix5 you can making a histogram and save it in a text-file. Is this also possible in WinCC flexible using VB-script? I want to make a histogram from 6 boolean inputs for 10 sec. long when I pressed a button and save it in a *.txt or *.csv file on my harddisk using WinCC Runtime. Any idea to do this? mulderm
  4. Making histogram with VBScript

    JesperMP, This option is what I want: edit: For logging data below 0.5 seconds, then you should use the PLC as the datalogger. You can then come down to for example every 20 msec. In WinCC Flex you can display the logged values as a "buffered" trend. Because I have 6 inputs (proximity switches) what will detect cams on a motor-axis. So I will see this in a histogram in about 10 sec by WinCC Flex (buffered trend?) Do you have a sample S7-300 program for this? Greetings, mulderm
  5. Making histogram with VBScript

    Lewy, I am very interested! mulderm
  6. Hello, I have a Siemens S7-300 plc and I will create a button on a HMI-panel with will do the following: Logging 5 variables with a sample time of 50 ms and store the values in a datablock. This must happening in 5 seconden. Also create a datablock with store the sample time. So I can later analysis the values of the variables in a Trend. Who can help me to make a program in Step 7 or VBScript in WinCC? Greetings, mulderm
  7. Hello, I have a mpi-network with adres:0 = modem, adres:2 = S7-300 plc, adres:3 = Touch-panel When I start up a step 7 program and I will monitoring a block everything works perfect. And then start-up wincc with have an integrated project and starting the Run-time I get no connection with the panel (seeing ####). Then when I will going monitoring the same block in the Step 7 program I get the message: "The set local node address is already in use" Looking in the set pc/pg interface: adress is 3 (was 20). Changing the adress again in 20 and doing as above descriped the same problem appear. Opening the set pc/pg interface again: the adress-value is again changed from 20 to 3. Who can explain this and what is the solution? Greetings, mulderm
  8. Hello, I have a Eplan project named with the extension p. Example: project.p I can not open it with Eplan P8. Is this created with another version? Why can I not open it? Greetings, mulderm
  9. Can not open Eplan project

    Thank you for the information. I will try that. mulderm
  10. Connection lost with CP 243-1

    Hello, I have a Siemens s7-200 plc (CPU222) and a CP 243-1 ethernetmodule. Most of the time when I will going online using MicroWin I get no connection with the CP 243-1 and sometimes I get good connection. When I going to the communications option and I click on the refresh than sometimes I get "unknow" adres and "not connected". The leds on the CP 243-1: Run and Link leds are green. When I using a ping command always I get response from the CP 243-1. The cable is correct. When sometimes I have connection (led cfg is yellow) then the communication stay's good. When I going offline and try online again then there is again no connection. Who recognise this problem? Greetings, mulderm
  11. Hello, I have a S7-200 plc (CPU222) with a CP 243-1 ethernet-module connected on my home network. I can communicate with the plc using Microwin installed on my notebook everywhere in my home by a ethernet-connection. Now I will communicate with my plc when I have my notebook connected on internet somewhere else example on my holiday-adress. Is this possible? Can I using portforwarding on my router and how must I configure this in MicroWin? Greetings, mulderm
  12. Communication with cp 243-1 by internet

    Crosbow, And where I must set the router internet adres? In the Ethernet-wizard setting in MicroWin or in the communications setup in MicroWin or something else ? mulderm
  13. Saving actual values in the DB-block

    Very good Mape. Great tip and thanks. Greetings, mulderm
  14. Hello, I using Siemens Step 7 software. When I open a DB-block in the data view and click on the monitor button I can see the actual values. When I close the monitor button the actual values are zero. How can I save the actual values in the DB-block so I can see later in offline the values? And when I have many DB-blocks how can I save the actual values? Greetings, mulderm
  15. Saving actual values in the DB-block

    Thank you for the fast response. And when I have many DB-blocks I must open all the blocks one for one and save it one for one? Greetings, mulderm
  16. Call Environment

    You are right Groo, I was online so this message was correct. Now I have change it in the offline status and now it´s working good. Thanks for the help. mulderm
  17. Call Environment

    Hello, I have a S7-300 program with many calls to the same FC. It´s working good but when I try a Call Environment, to see the working of a block, I get the message: The call conditions cannot be changed during the running the program state.Exit the program state to change the settings. So this will not worked. What will this mean and what must I do? Greetings, mulderm
  18. Error-code 8093 from SFC14

    No, the Error-code is 8093. mulderm
  19. Error-code 8093 from SFC14

    Hello, I have a profibus network with the CPU 315-2dp and an inverter as slave from Lenze. In the hardware configuration I have the adresses of the slave setting on I 256..259 and O 256..259 (2 words). Now I have programmed in OB1 the SFC14 block. LADDR= W#16#100 RET_VAL= MW100 RECORD= P#M 100.0 BYTE 4 Now the problem is that I received code 8093 on the RET_VAL. I have seen in the help that this mean: No DP module IO device from wich you can read consistent data exists at the logical adress specified in LADDR. But the adress is 100 in HEX what´s mean 256 in dec. When I making a VAT with PIW 256 and PIW 258 and monitoring I received the information from the slave so I know that it´s working. But why I received Error code 8093? Greetings, mulderm
  20. Error-code 8093 from SFC14

    Thank you Jesper, I use the normally way. But still not know why of the Error-code 8093 I received. Greetings, mulderm
  21. Error-code 8093 from SFC14

    Jesper, What do you mean with normal load and store with doublewords in stead? mulderm
  22. Error-code 8093 from SFC14

    Hello thanks for your help, Changing RECORD = p# M 200.0 BYTE 4 but still get Error 8093 hex.
  23. Error-code 8093 from SFC14

    Yes, the settings are good because with the Vat-table I can control the Inverter with the PQW 256 and the PQW 258. And read the status with PIW 256 and PIW 258. mulderm
  24. Hello, I have copied a good working Siemens Step 7 project to mine notebook installed with Step 7 software. Now when I opening the project I see only an empty OB1-block (all other blocks are gone)and an empty hardware configuration. How is this possible? Problem with the hardware update on the notebook? Who have the answer? Greetings, mulderm
  25. Import WinCC graphics

    Hello, I have a WinCC projekt with many graphics. When I will create a new projekt and I will get a new Graphics view no graphics appear from the other projekt. How can I import all the graphics from the excisting projekt to my new project? Greetings, mulderm